Silver items can only be cleaned with mild abrasives. To do this, use baking soda, chalk, and tooth powder. A silver chain can be easily cleaned of blackness at home if it is completely immersed in olive oil. Leave for twenty minutes, then rinse thoroughly in a soapy solution, and rinse the metal product first with cold, clean water, then pour over with boiling water. Silver metal and many other products and solutions can be used to clean silver metal.

Cleaning your silver item

The chain should be cleaned of dust when it has darkened and some of its places have turned black without causing harm. Many jewelry departments sell special cleaning products, which include paste, soap, and wet wipes. They are not aggressive towards metal, they can be used to remove various blackening from a cross, chain, bracelet and rings.

But at home you don’t always have cleaning products on hand, so you can use folk remedies available funds for soft cleaning of silver chain. Helps clean the chain toothpaste, which does not contain colored inclusions in the form of stripes of different colors:

  1. 1. You need to take a small container and put a silver chain in it.
  2. 2. Squeeze white toothpaste from the tube, gently rub with a soft toothbrush and rinse with running water, ensuring the product is clean.
  3. 3. To dry, use woolen cloth or flannel.

If the metal of the item on the jewelry has darkened, you can clean it together with the chain silver rings, cross, bracelet quickly and effectively, you need to use ammonia, which must be diluted with clean water, the proportion should be 1:1. You need to take a gauze cloth, soak a piece in this solution and wipe the products. It is not recommended to use cotton pads for cleaning jewelry; during the cleaning process, cotton clogs the space between the links of objects and is then difficult to remove.

If the blackening is not cleared off in one go, then you should immerse all these things in the solution and leave for 10 minutes until everything comes off. After cleaning your silver items, you should wipe and dry them.

Using effective ways to renew decorations

You can clean a silver chain at home in another way:

  1. 1. Take a piece of chalk.
  2. 2. Crush it in a mortar.
  3. 3. Add ammonia.
  4. 4. Make a soft paste.
  5. 5. Apply it to the surface of the product and rub gently. You should use a soft toothbrush to clean the spaces between the links of the product fragments when rinsing with water.

The most common method is to bleach the blackened chain using a mild abrasive:

  1. 1. Place a teaspoon of baking soda powder in a bowl.
  2. 2. Add water until a thick mixture is obtained.
  3. 3. Place the product there.
  4. 4. Rub with a soft bristle brush. Rinse with clean water to remove any remaining mixture. Wipe with a woolen cloth until the decoration shines. If you don’t have soda in the house, you can replace it with tooth powder, which is an effective remedy.

Product renewal with acid

Products blackened by iodine are cleaned with various acids. Chains and other silver items that have stains can be removed with the following product:

  1. 1. Take one lemon.
  2. 2. Squeeze the juice out of it.
  3. 3. Soak the product in lemon juice for 15 minutes.
  4. 4. Wipe off the juice-treated decoration.

Lemon can be replaced with powder citric acid. The proportion consists of one teaspoon per 100 g of pure water.

Regular 9% table vinegar cleans the surface of the chain:

  1. 1. You need to pour a little vinegar into the container so that the chain is completely immersed in this solution.
  2. 2. Dip the product in vinegar and wipe with a cloth. All blackness dissolves.
  3. 3. If the stains remain, you should repeat cleaning the jewelry in vinegar until the stains completely disappear.

It is good to clean silver with Coca-Cola.

You can dilute ammonia in a soap solution (take a teaspoon of ammonia in proportion to a glass of solution), which can be replaced with ammonia. Leave the product in the solution for thirty minutes, then wash and dry. Rub with a wool cloth until the product shines. If you rinse the jewelry with soapy water after each wear, the chain will not turn black and will always shine.

Effective ways to clean a silver cross at home

Unusual ways

Prepare a cleaning solution at home:

  1. 1. Take a container for the composition.
  2. 2. Add one tablespoon of the following: lemon juice, vodka, dishwashing detergent.
  3. 3. Stir all ingredients and immerse the silver chain in this solution.
  4. 4. Leave the product to soak until the morning, then rinse with clean water and pour over boiling water. Clean dry decoration until shiny.

You can use foil to remove blackening. To do this, completely cover the bottom of the pan with foil. Place the silver jewelry there, fill the container with water and soda, take two teaspoons of baking soda powder per 100 g of water. Boil for five minutes from the moment of boiling. Turn off and leave in the solution for 10 minutes. Then rinse with clean water and dry.

To avoid the boiling procedure, you should immerse the silver chain in potato broth. You need to pour this broth into the container where the foil is located for 15 minutes, the blackening will quickly dissolve and the chain will sparkle.

Using proven hot methods

Salt is considered a universal cleaner for various metals, including silver:

  1. 1. You need to add a tablespoon of rock salt to a glass of water.
  2. 2. Stir until the salt dissolves.
  3. 3. Load the chain so that the solution completely covers the product.
  4. 4. Leave the chain in the salty solution for two hours.
  5. 5. After this, put the solution with the product on the fire, close the lid. Boil it directly in this liquid for 10 minutes.
  6. 6. Then the water needs to be drained, the silver should be washed in cold running water and dried well.

The effect of cleaning a silver chain can be obtained by using the following recipe:

  1. 1. Make a soap solution consisting of 30 g of laundry soap and 100 g of water.
  2. 2. Heat the water a little.
  3. 3. Rub the soap on a fine grater and dissolve in water.
  4. 4. Leave the chain for 30 minutes in the prepared solution, then rub all the chain links in the same solution with a toothbrush, rinse well in cold water, pour over boiling water, then wipe dry.

If stored for a long time in places with high humidity, the chain may not only become covered with a black coating, but also spots with a greenish tint will appear on its surface. To remove them, you need to boil silver jewelry for five minutes in a soap solution in the proportion of 100 g of liquid per 20 g of soap with the addition of a pinch of baking soda. Then rinse with clean water and dry well. Wipe the chain with a flannel cloth until it shines.

The appearance of a chain and rings with a bracelet, a silver cross will become more attractive if you boil them in a glass of milk with a pinch of soda. This old method effectively cleanses all silver items. After boiling for ten minutes, the silver will brighten and shine.

Many representatives of the fair sex prefer silver. Products made from it are attractive and always relevant. An additional advantage is the affordable price of jewelry.

But they are not alien to silver either negative qualities, one of which is the darkening of the metal over time. However, if you know sure ways, then you can clean a silver chain or other item with minimal time and physical effort.

There are factors influencing this some.

  • Some floating in the air and environment chemical elements react with silver, causing the metal to acquire a dark tint. The most great influence render compounds where nitrogen and sulfur are present.
  • Interaction with human skin. Active sweating causes a reverse reaction in the metal, which darkens. Therefore, it is better to avoid silver items during periods of intense physical activity.
  • Taking medications that contain individual components that affect the color of silver.
  • Skin care products can also be one of the reasons why silver turns black.
  • Excess moisture is a threat to silver. You should not take a shower or swim in water while wearing jewelry, as well as wear it too often in rainy weather.

Consider all the above nuances. Otherwise, you will waste time cleaning the products, and they will darken again and again.

Silver jewelry can be chains, rings, brooches, bracelets, pendants, earrings, watches with (or without) inserts of precious stones.

The alloys that make up the jewelry may also differ in their content. Therefore, suitable methods must be used for each type of silver. But there is also general factors applicable to any type of silverware.

  • Wash the product from visible dirt. Make a solution of water and soap shavings, immerse the jewelry in it and leave for a couple of hours. Then scrub the jewelry with a soft brush. It happens that such an action returns them to their original appearance and there is no need for further cleaning.
  • Do not use too hard materials for work - brushes with coarse bristles, sponges, etc.
  • If you bought special products that are used to clean silver, then do not place too high hopes on them, using them in maximum quantities. Increasing the volume will not make it better, but it may ruin the decoration. Therefore, follow the instructions strictly, without retreating a step.
  • Do not wear rubber or latex gloves. Due to the high sulfur content in them, the product is more likely to darken. An alternative would be nitrile gloves.
  • Finish any cleaning by rinsing the product with warm running water and removing excess moisture with a soft flannel cloth.
  • Items made of silver must be dried, otherwise the surface will become covered with stains.
  • To store silver items, use a separate box with a tight-fitting lid.
  • If the product is too dirty, do not try to do it yourself. It is better to entrust the work to professionals.

It is not recommended to wear silver items for several days after they have been cleaned. This time will be required for the formation of a new protective layer on the surface of the metal, which will become an additional factor responsible for preserving the appearance of silver for a long time.

How to clean blackness from a silver chain?

There are several methods that can be used at home using available materials. All of them differ from each other in the content of ingredients included in the composition of a particular product. So how to clean a silver chain if it has darkened?

It involves the use of components that do not need to be diluted with water. The product will simply need to be rinsed at the end of the work.

Baking soda– a universal remedy that can be found in every kitchen. The method using it is one of the most famous. The procedure is very simple:

  • lay on a flat surface paper towel;
  • sprinkle one teaspoon of baking soda on it;
  • place your product on a pile of crystals;
  • fold the towel so that a bag is formed;
  • begin to gently but intensively rub the bag between your palms;
  • holding the bag with one hand, open it with the other and begin to pull the chain so that crystalline specks of soda polish its surface;
  • Unfold the napkin and inspect the black residue on its inner surface. This is what you have been struggling with;
  • Shake the product and rinse it with water.

Tooth powder. Repeat the method with baking soda, only instead of it you need to sprinkle teething powder on a towel. An alternative to a towel can be a piece of soft terry cloth. Clean the remaining powder with a toothbrush, rinse the product and set it aside for a while to form a protective layer.

Cloth will become an indispensable assistant with which you can clean tarnished silver jewelry. Therefore, if you are an ardent fan of silver products, you should definitely have this material in your storerooms. It is used for polishing products, which must be done regularly.

Cleaning with wet methods

Assumes use of various liquids.

  • Ammonia. It can be found in any home medicine cabinet. If not, then the price is low, and you can purchase the product at any pharmacy. This universal product will clean not only silver items, but also gold and gilding. The method is quite simple. You just need to ensure that the solution covers them completely. Leave in this condition for 20-15 minutes, rinse with water and dry.
  • Fresh lemon juice or citric acid. Squeeze one lemon into a bowl, dip the products in the resulting juice and simmer them in the solution for 10-15 minutes. Rinse with warm water. An alternative to lemon juice is citric acid. A solution is prepared with it: 3-4 teaspoons of “lemon” are diluted in 0.5 glasses of water. The solution must be highly concentrated, then the silver items will shine.
  • Vinegar and table salt. Apply the solution: half a glass of warm water, 50 ml of vinegar (9%), 1 tablespoon of salt (preferably sea salt, since its crystals are smaller). Immerse the products in a container with the product for 30-40 minutes. If there are heavily soiled areas, we clean them with a brush. We wash and dry the jewelry.
  • A hot solution of salt and water. Boil water and pour table salt into it. You need to achieve a strong concentrate, so you shouldn’t skimp on salt. Immediately lower the silver into the boiling solution and wait until everything cools down. Rinse and dry. If you put foil in the product, the method will work much better.
  • Coca-Cola is known for its solvent properties. You just need to immerse your silver jewelry in it and leave it for two to three hours.

"Heating method" is in the following:

  • line the bottom of a small, shallow pan with foil paper;
  • pour in soda in the amount of two tablespoons or lemon in the same proportion;
  • put silver there;
  • pour water until the jewelry is completely covered with liquid;
  • boil and keep on low heat for 5 minutes;
  • wash the products in warm water and dry with a towel.

Water from boiling potatoes. You need to immerse silver in it, add potato peels (rinse them thoroughly before doing this), and boil the composition for 30-35 minutes. Wash and dry items.

Associated with the processing of jewelry with individual components through intense friction on the surface of the product. The most common remedy is GOI paste.

This method should be used to clean silver very carefully. The paste, called GOI, is designed specifically to restore silver products to their original purity.

You can buy it in special stores. This product will ideally polish jewelry, but it is a good idea to follow the recommendations on the packaging.

To carry out the work, the paste is applied to a cotton or wool cloth, which is pre-moistened in gasoline or other solvent. Then the paste substance will be distributed evenly throughout the fabric.

This will allow you to cover all areas of the product without gaps. In addition, there will be no crystal pieces that can scratch the jewelry. To enhance the effect of the paste, you can coat the silver with a thin layer of industrial emulsion. All that remains is to clean the jewelry carefully and over time.

Olive or sunflower oil can be used as a means for the mechanical method. It is also applied to soft fabric and, through friction, is distributed over the entire surface of the product. Then wash off with warm soapy water. Next, the silver needs to be dried.

You can also try cleaning the jewelry with regular paper napkins. They simply carefully rub the surface of things, making some effort. The final result depends on the intensity of friction.

There are many methods for purifying silver. If you know how to properly clean a silver chain or other jewelry made of this metal, then you don’t have to be afraid of such an unpleasant phenomenon as darkening of the silver. And the product will delight you with its beauty and fresh appearance.

Owners of silver items often ask the question: how to clean a silver chain? A blackened piece of jewelry is not attractive, but rather indicates the carelessness of the owner.

In the photo: the result of cleaning a silver chain - before and after

There are several reasons for darkening:

  • A person's sweat accumulates on the chain and becomes clogged with dust and sebum.
  • The humid climate in the area where the owner lives contributes to the accumulation of dirt.
  • Frequent contact with water, including sea water, contributes to rapid darkening.

Experts say that the darkening of silver is a natural process. Instead of looking for reasons, it is better to regularly clean your jewelry from plaque.

The cleaning method depends on the degree of contamination, as well as the quality of the silver. Massive chains are not afraid of strong cleaning agents. Thin items are best cleaned by delicate means without abrasive impurities.

Cleaning with ready-made products

Jewelry stores sell prepared solutions that can be used to clean a silver chain. The bottle contains instructions for use and the permitted frequency of use.

At home, you can resort to the following methods:

  • Dishwashing liquid. Apply a little product to the moistened chain. Clean well with a toothbrush and rinse generously with warm water. If necessary, the procedure is repeated twice.
  • Soap for cleaning silver products. They lather the wet product with it, clean it with a brush, and rinse thoroughly with water.
  • Wipes for cleaning silver items.
  • A device for cleaning silver using ultrasonic waves.

Depending on the quality of the jewelry, they determine how to clean the jewelry.


 Cleaning the chain with toothpaste

How to clean a silver chain using improvised materials?

With products that are found in almost every home, you can perfectly clean silver jewelry. To the most effective ways include:

  • Toothpaste. A simple white substance will do. Gels and multi-colored pastes are not suitable. Using a toothbrush with soft bristles, rub the chain according to the principle of brushing teeth. After this, the chain is thoroughly rinsed in water and dried on a napkin.
  • Tooth powder. Manipulations are performed by analogy with toothpaste.
  • Ammonia. Add 5-6 drops of alcohol to a container with warm soapy water. Dip the decoration into the solution for 15 minutes. They get it. Rinse the product thoroughly with water.
  • Soda. It is mixed with water in a ratio of 3:1. Rub the chain well with the gruel and rinse the product in warm water.
  • Foil. It is placed at the bottom of the pan. On top is a darkened chain. The decoration is covered with two tablespoons of soda, then water is poured to cover. Boil the pan for five minutes. Sometimes soda is replaced with citric acid. After boiling, the decoration is taken out, washed thoroughly in cold water and allowed to dry.
  • Olive oil. Apply a little olive oil to a soft cloth. They rub silver with it. After which the product is washed in warm soapy water and dried.
  • Vinegar. A silver chain is placed in a container with vinegar. Leave for two hours. After the expiration date, the decoration is taken out and washed well with water.

 The process of cleaning a chain with toothpaste step by step

Unconventional cleaning methods

"Dry" method:

  • Place a handful of baking soda on a paper towel.
  • Place a silver chain on the soda, hold it in your hands and perform movements similar to hand washing the item.
  • The napkin is pinched between two fingers. Carefully pull the chain through the napkin. During manipulation, dark marks remain on the white napkin.
  • Use a paper handkerchief or soft cloth to remove any remaining soda. There is no need to wash the chain.

All manipulations are carried out with slow movements, otherwise the jewelry will be covered with small scratches.

Cleansing with Coca-Cola

A silver chain is dipped into a glass of cola for two hours. Then take it out and wash it well.

Prevention of darkening

In order not to have to worry about cleaning jewelry from accumulations of dust, dirt and sweat, it is better to prevent them from darkening. At home, it is very easy to periodically carry out preventive measures aimed at preventing darkening.

Basic preventive measures:

  • The silver chain is wiped with a damp flannel cloth after each wear.
  • Silver jewelry should be stored in a box lined with fabric.
  • Do not mix silver items with jewelry made from other metals.
  • Once every two months, preventive cleaning is carried out with special mixtures or improvised means.
  • A colorless varnish can prevent blackening. It is applied in a thin layer to the new product. Shake a little, allow the liquid to be evenly distributed in a thin layer.

Preventative cleaning measures will help prevent dirt from accumulating between chain links. Therefore, you will need to clean the chain much less often.

Silver jewelry is no less popular than gold jewelry. This is due to external aesthetics and low cost. But this metal can become covered with a gray or black film, which appears as a result of the natural oxidation process under the influence of sun rays, moisture and human sweat. But you can clean the blackness from a silver chain at home, polishing its surface to a shine using folk remedies.

Why does silver jewelry darken?

A silver chain around the neck darkens for several reasons:

  • interaction with air, which contains sulfur and nitrogen compounds that negatively affect silver;
  • frequent contact with water, so it is recommended to remove jewelry while taking water procedures;
  • interaction with human sweat, and for each person the oxidation process occurs at a different rate;
  • contact with cosmetics, household chemicals and perfume.

Rapid darkening silver jewelry, for example, a chain or cross, may indicate a small amount of silver in the composition - the faster the oxidation process occurs, the less of this metal was used.

What to consider when choosing a cleaning method?

Any silver alloy can be cleared of blackness, even if it initially contained a small percentage of this metal. But when choosing a product, you need to consider the following:

  • silver sample;
  • the presence in the product of elements made of another metal, which can be adversely affected by means that can eliminate blackening;
  • the presence of organic stones in the design, especially if a special industrial product is used for cleaning.

How to clean silver: home remedies?

You can clean silver items at home. This can be done by folk or by special means.

Baking soda and vinegar for blackheads

Acetic acid perfectly dissolves blackness on silver items. If the contamination is minor, you can wipe the darkened silver chain with a dampened rag. If almost the entire product has darkened, then it must be dipped in vinegar and kept there for 2 hours. After this, rinse and dry the product.

Vinegar is a means of removing tarnish not only from pure silver, but also from gold plating.

Soda has almost the same properties, but cleaning occurs more due to mechanical action rather than a chemical reaction. Dry and wet cleaning is possible:

  1. Sprinkle soda in the form of a strip onto a piece of fabric. Place the decoration on top, then roll up the fabric. Rub the product with your fingers through the material, then press the napkin and remove the chain, pulling it through your fingers. Remove any remaining soda with a brush or simply shake the item, and then wipe it with a flannel cloth. ABOUT positive result Cleaning may be indicated by a dark mark on the rag.
  2. Mix water and soda in a ratio of 1:3. Rub the resulting mixture onto the damaged jewelry, then rinse and dry it.

Foil

The foil contains aluminum, which can react with silver sulfide, which allows it to destroy the black film on the surface of the jewelry. There are 2 ways to use foil:

  1. Line the bottom of the pan with foil. Pour some water into the container. Add 2 tbsp. l. baking soda or citric acid. Place the darkened decoration in the pan. Place the container on the stove, wait until the water boils, and after 3-5 minutes remove the pan from the heat. If the chain is still dark, then the time can be increased.
  2. Spread the foil on a flat surface. Place the decoration on it and 2 tbsp. l. salt. Pour some water. Fold the foil into an envelope and place it on the bottom of a pan with a soap solution (1 teaspoon of soap for 1 glass of water). Bring the contents to a boil, then remove from heat and after 15 minutes remove the chain.

In both the first and second cases, the product must be cooled and then rinsed under running water.

Gold is called the metal belonging to the Sun, and silver - the Moon. Just like the mysterious satellite of our planet, silver has always been surrounded by an aura of mystical secrets. People resorted to his help when they wanted to protect a loved one from evil, disinfect a liquid, or get rid of an illness. Unfortunately, over time, any silver item darkens. However, do not be upset, because the item is not damaged. Let's look at how to clean a silver chain at home using available products.

Potato peelings

How to properly clean a silver chain? The simplest and quick option- boil the product in water with potato peelings. The latter must be washed well. At the same time, you don’t have to prepare or buy anything: your favorite thing can be placed in the water where the potatoes have already been boiled. The only thing is that only jewelry that is not decorated with stones can be processed in this way. It is recommended to boil the water for fifteen to twenty minutes over low heat. As a result, the chain will be impossible to distinguish from a new one. Instead of potato peelings, you can use eggshells or garlic peels.

Citric acid (soda) and food foil

How can you clean a silver chain? To return the decoration to an attractive appearance, use another “hot” method: be sure to cover the bottom of the pan with ordinary food foil, pour water into the container and add two tablespoons of salt or citric acid, then place the chain there. The liquid should be boiled for five minutes.

Vinegar

What is the best way to clean a silver chain? If you don’t have any potato peelings or citric acid on hand, you can use vinegar. Just soak the jewelry for a few hours and it will shine again. Just remember to thoroughly rinse and dry the item after completing the procedure.

Olive oil

How to clean a silver chain at home? Olive oil will help cope with the problem. It is enough to moisten a soft cloth in it and wipe the darkened product with it. An amazing transformation will happen right before your eyes, but do not forget to rinse the product thoroughly and leave it on a dry towel to dry.

Soda (baking soda)

How to clean a silver chain at home? Baking soda will be a real salvation. It should be mixed with warm clean water in a ratio of 1:3. The resulting mixture must be thoroughly rubbed onto the product until it regains its original shine. After this, it is important to rinse the chain thoroughly with water and leave to dry.

Ammonia

With the help of this substance you can return your favorite products to an attractive appearance. To prepare the cleaning solution, pour one hundred milliliters of water into a small container, add one teaspoon (teaspoon) ammonia and a drop of liquid detergent. Place the chain there and cover everything with a lid. Now you need to wait a little. After some time (depending on the degree of contamination), the clean product can be removed, washed and dried.

Another option is to place the decoration in a mixture of ammonia, toothpaste and water (take all components in equal proportions). After half an hour, the chain must be taken out. You can proceed to the second stage of the procedure - thoroughly cleaning the product with an old toothbrush (the bristles should be very soft, otherwise scratches will remain on the metal).

Option for those who are not in a hurry

You need to pour two teaspoons of soap solution into a large cup. Then add the same amount of regular vodka and lemon juice (freshly squeezed). All these components must be thoroughly mixed. The chain is left in the resulting solution overnight. The next morning, remove the product and rinse it thoroughly under warm running water.

Dry cleaning method

How to clean a silver chain at home without using any liquids? This will require some baking soda. Place a handful of this substance on a towel. Then place the product on the baking soda, wrap it tightly in a cloth and gently rub it with your hands (make the same movements as when hand wash). Next step: hold the napkin between two fingers and carefully pull out the chain. Keep in mind that dark marks remain on the fabric. It is recommended to remove the remaining soda with a soft cloth. The crystals of this substance are so small that they do not need to be washed off with water.

Coca-Cola and other similar drinks

Let's consider alternative option how to clean a silver chain at home. For these purposes, oddly enough, Coca-Cola is perfect. Pour the drink into a glass and place the product that has lost its presentation into it. In a few hours it will be as good as new. By the way, this world-famous drink is also perfect for cleaning sewer pipes (think about its health benefits in your spare time!).

Toothpaste or powder

Products of this kind also do an excellent job of cleaning silver items. To do this, you need to take a used toothbrush and apply toothpaste (powder) to it. This tool will cope with the problem perfectly - the dark plaque will disappear without a trace.

Special product

Has your silver chain become dark? How to clean it if you don’t trust the effectiveness of available products? Go to your nearest jewelry store and purchase a foam or paste designed to remove dark deposits from your favorite jewelry. They are suitable even for those products that are decorated with stones. In addition, there are special wipes on sale that cope just as well with the problem of blackened metal.

In particularly advanced cases, you can contact a jeweler. For a small fee, a specialist will thoroughly clean the product.

A little trick

The purchased silver chain can be coated with colorless nail polish. After this, you need to carefully take the product by the clasp and hold it for several minutes until it dries. Keep in mind that there should not be too much varnish, otherwise it will flood the chain links.

Rules of care

Silver is a truly amazing metal with antiseptic properties. It can be blackened, filigree, matte and sterling (regular). It has been noticed that over time this metal only becomes more beautiful. However, under the influence of negative factors, silver turns black and, accordingly, loses its marketable appearance. Products made of 999 silver do not undergo this process for the longest time. The fact is that this metal has the lowest copper content.

Where would a silver chain be appropriate, and where would it be best to remove it? If you are going to visit a bathhouse, sauna or gym, it is better to leave the decoration at home. This way you will protect the metal from moisture and contact with sulfur (the latter is released with sweat and can negatively affect the appearance of the product). During a long stay in the condition high temperature and under direct exposure to light, silver also turns black.

Another useful advice: When doing housework, it is best to remove jewelry made from the metal in question. By following this rule, you will protect your jewelry from scratches and dirt.

When taking medications and applying medicinal ointments, it is also best to remove the chain. Included cosmetics and medications may include components such as sulfur and mercury that react with silver.

Products made from this metal are not recommended to be stored together with other jewelry. It is best to purchase a separate box, upholstered on the inside. soft cloth. Keep in mind that paper and cardboard boxes also contain sulfur, so you should not use them to store a silver chain.

Conclusion

Has your silver chain turned black? We discussed in detail how to clean it in the article. There are different options fix an annoying problem. Among them are “dry” and “wet” methods for removing black deposits, solutions for those who are in no hurry, and for those who want to clean their favorite product as soon as possible. The choice is yours. The only advice for everyone is to properly care for your silver chain. In this case, you won’t have to clean it so often. Be careful when handling your jewelry and it will last you as long as possible.