Even if your toy fleet is full of various trucks, cars and military equipment bought and donated by adults, a do-it-yourself model of a fire truck will take the most important place in it. Not because this cardboard machine is so bright and beautiful, but because you made it yourself.

Car layout


Having such paper cars, you can organize real rallies around the apartment. You can build a garage for them. They are easy to paint with felt-tip pens and stick a toothpick flag into the cabin.

  1. Take a square piece of paper and fold it in half. Then unfold and fold inwards towards the middle of the edge of the paper.
  2. Fold the edges over again, but this time in the other direction and fold the sheet in half lengthwise.
  3. Make your own paper car outline by first folding the top corners and then tucking them in. Below, two corners will peek out from under the car. Fold them inward in the same way, marking the wheels of our car.
  4. Bend the bottom corners back, “rounding” the wheels a little. Place the corners in the back of the origami machine, and make “headlights” in the front.
  5. To do this, bend the corner with your own hands and then straighten it.
  6. You can draw headlights, handles, doors and the driver behind the wheel. So we made the first origami cars. 15 minutes and the car is ready.


We will need:

  • 5 cardboard tubes from toilet paper;
  • 2 spools of tape;
  • boxes of different sizes;
  • scotch;
  • glue;
  • acrylic paint or gouache;
  • paper napkins;
  • masking tape;
  • 4 cocktail straws;
  • matches;
  • newspaper.

Work order

  • Create the frame of a fire truck with your own hands. To do this, fold boxes of different sizes and glue them with tape. Try to make a design that resembles a vehicle with a cabin and a covered body.


  • Cut the tape spool in half and cut as shown in the photo. These will be the wings. You need to make 4 such blanks.


  • We make mock-ups of water tanks from toilet paper reels. To do this, we manually seal their ends with masking tape and connect them two at a time.


  • To secure the wings, cut the boxes with a knife in three places. Additionally, we glue them with tape. We attach the tanks to the sides, and on top of the cabin there are several layers of strips of corrugated cardboard - this is the future “flashing light”.


  • Now you need to make a model of real wheels with your own hands from toilet paper reels. Cut them into rings and cover one side with a circle of cardboard.


  • Fill the wheel with crumpled newspaper and cover the end with masking tape. Wrap the wheels with strips of corrugated cardboard.


  • To smooth out all the imperfections and unevenness, cover a homemade car made of cardboard. paper napkins. Make strips of cardboard and glue them around the windshield as a frame.


  • You need to make fire escapes from cocktail straws and matches and paint them silver. We make side mirrors from silver paper and matches. Paint the “flashing light” and glue on a cardboard bumper. Attach the headlights. You can use metal caps from beer bottles for them.


  • Our craft is almost ready. All that remains is to paint it with acrylic paints and place it on axles, which will be any two wooden sticks. Don't forget to attach a fire escape to the top.



In fact, the vehicles used by fire rescuers can have different shapes, as well as different purposes. For example, you can make an excellent layout from an egg carton truck carrying fire hoses. This pressed cardboard machine will be stable and strong.

  • Cut the boxes with your own hands as shown in the photo.


  • Paint the layout with gouache or acrylic paint.


  • Cut a toilet paper roll in half and twist red and yellow tubes into halves.


  • Glue the parts together. For this machine, you need to make wheels from cardboard from plastic caps, placing them on wooden or metal axles. Place bobbins with sleeves in the body, glue on headlights made from beer caps and the craft is ready.


Mothers and grandmothers probably have a lot of multi-colored buttons accumulated in their boxes, which have nowhere to be used and would be a pity to throw away. But they can make an excellent picture. First draw the outline of the car on paper, and then fill it with colored buttons, carefully gluing one at a time. Place your homemade picture in a frame and give it to the owner of the buttons.


To make such a delicious cardboard machine, you will need 4 suitable sized boxes, ladders made of matches and tubes, cardboard, napkins and half a kilo chocolates in red candy wrappers.


Make a model of the car from cardboard as described in the first method. Install the ladder, paint it, and then stick candy on all sides. Instead of wheels, you can use chocolate marshmallows, and instead of headlights, colored jelly beans. It’s not a shame to give such a layout to a friend for his birthday.

Race car

In just an hour, you can easily fill the entire toy car park by making paper cars different forms and stamps.


In order to make a model of a paper racing car with your own hands, you need to take a standard A4 sheet.

  1. Fold the sheet in half lengthwise. Fold the corners inward on both sides, forming arrows.
  2. Fold the longitudinal sides towards the middle under the arrows.
  3. On one side, fold the arrow towards the middle, making it even sharper.
  4. Lift the other side and place it on top of the folded arrow, tucking it in between the layers of paper.
  5. Bend the tail of the car. You can draw headlights on it.
  6. To make it clearer how to make a paper machine, you can give another drawing diagram.


All boys love to play with cars, but not everyone can make them themselves. Therefore, it will be useful to learn how to make a paper machine with your own hands. This is exciting This activity will help develop your thinking and your baby’s perseverance. Materials for crafts are always at your fingertips.

Making a three-dimensional paper toy

To make a 3D car you will need:

Making a car with your own hands is very simple. For this no special skills required, you must adhere to the following instructions:

There are two options for cars for 3D crafts: multi-colored and those that need to be decorated.

Making a Fire Truck

The fire truck is loved by many children, but finding it on store shelves is not easy. To make it yourself, you will need the above materials, patience and accuracy.

The principle of operation is the same as with volumetric machines, so there is nothing new here. But there will still be a hint. Try to bend contours with a blunt object, it's easier that way. It is better to use cardboard for drawing. When everything is glued, you can proceed to the stairs. Top class if the stairs can be raised and extended.

Paper crafts from scrap materials

With age, every boy wants to improve his cars. It becomes too easy to apply patterns for it. So we can start to crafts from scrap materials. You will have to wait until the age of 3, since these materials can be dangerous for the baby.

All boys love racing, which means they will definitely love racing cars. Improvised means for making them can be found in every home: matchboxes, colored paper, cardboard, small wooden sticks.

First, roll up a cylinder or take the one left over from a toilet paper roll, cover it with something colored and cut a hole in the middle. It will be driver's cabin. We cut out four wheels from black cardboard and glue white circles in the form of disks in the middle of each. The child will be happy to color the resulting design as he likes.

The best way to make a truck is from a matchbox. To do this, take the outer part and cut it in half. Place one half horizontally, and place the second half vertically close to the first. The inner part must be pushed into the horizontal half . This is how we get the trunk. We cut out seven wheels, attach four to the trunk, and two to the body. We attach the fifth wheel to the rear of the trunk. This will be the spare tire. We finish drawing the little things: wipers, shiny glass, door handles and wheel bolts.

Origami car

A more complex option is an origami machine made of paper. No other available materials are required. There is no need for gluing either, since the strength of the modules will be high. But assembling the car itself will have to work hard. Module can be done in different ways , but they are all attached the same way. To clearly see how the module is made, take a look at the figure.

Development diagrams, patterns, templates

Paper crafts are useful for children. And the more your baby makes something with his own hands, the further he develops. Of course, modern boys choose a simpler method - toy cars or ready-made racing cars, police and military vehicles.

Many are simply uninteresting paper models, because they “don’t know how” to drive. This raises the question - how to make a car out of paper that drives? It’s quite easy to use lids from cardboard wheels instead of cardboard wheels. plastic bottles. And pairs of wheels can be connected to each other using wires or lollipop sticks.

Several designs or templates for toy paper machines.

Attention, TODAY only!

Today's master class will be dedicated to creating a paper car. The technique for creating such a craft is quite simple; even a child can make this machine. To get started, prepare the following tools and materials:

  • thick, medium to heavy colored paper in red and white;
  • durable cardboard in black and white;
  • ruler;
  • pencil;
  • glue;
  • scissors.

First we must create the base of the machine, that is, the body. From thick colored paper, any shade you like (in this case we will use dark red paper), cut out a rectangle.

Then we draw the outline of a circle on a sheet of white paper, and then cut it out.

You also need to cut out two of these pieces.

Now this blank must be glued to the base (red rectangle). Try to glue the part closer to the edge.

We make a hole like this in the center of the leaf. You can do it with scissors or a stationery knife.

Then we glue the remaining two parts on the other side of the workpiece.

Then we cut out these blanks. Also create four white circles, but of a smaller diameter.

Glue the white circles into the center of the black ones.

Now you can connect the ends of the machine base. This is what will happen in the end.

Then we glue the wheels to the side parts of the car body.

Then, also from black cardboard, we cut out the seat and glue it, but to the back of the car.

And the last touch remains - cut it out of cardboard suitable shade any number and stick it on the hood of the car (in the center of the white circle).

Now the paper machine is ready!

In the future, if desired, the child will be able to paint the machine or cut out some additional parts for it.

For various exhibitions of crafts and just for playing with children, you can make cars from cardboard. These can be small table toys, as well as large floor ones, in which the child can fit himself. Children love to help make and color while creating a purpose for the craft. It could be ambulance, a firefighter or a character from the cartoon "Cars".

In this article we will look at how to make a cardboard machine with your own hands from different materials.

Cardboard cylinder machine

The materials needed to assemble such a desk toy will require a hard cardboard cylinder left over from using toilet paper. Before making a small car out of cardboard, you need to use a knife to make a rectangular hole in its central part, which is intended for the driver. There is no need to cut off the paper completely - the backrest for the seat is made from the strip that is obtained in the center. The steering wheel can be cut separately from another cardboard.

All that remains is to attach the wheels. Before you make a car out of cardboard, you need to buy thick sheets of paper from which the wheels will be made. To make them stronger, it is recommended to glue them together from several layers. Then the child will be able to press on the toy with his hand without fear of bending the product.

The wheels are attached in pairs with bolts or buttons. The parts are painted separately, then everything is put together.

Cart

Let's look further at how to make a cardboard machine into which you can load toys, and it will play the role of a cart. It is better to make them from corrugated cardboard using small metal rods. You can take them from another broken machine or take them from waste material.

For the main design, you can choose a ready-made cookie box or assemble it according to a simple pattern for making rectangular boxes.

The wheels are mounted on an axle. Several layers of wire are wound onto the ends of a metal rod. This serves as a stop for the cardboard circles to prevent the wheels from falling off. It can be painted in different colors according to the child's wishes. A rope is tied at the front and the cart is ready.

How to make a car out of cardboard: diagram

Printed diagrams are now available for sale different models cars made of cardboard. These are well-known and popular cars of foreign and Russian companies. If you have a color printer, you can print them from websites.

Before you make a car out of cardboard, you need to carefully cut it along the contour with scissors, not forgetting the white corners, on which a layer of glue is then spread.

Assembling such a model is not difficult. You just need to carefully iron it with your finger at the folds of the paper. But it will be just a static toy, the child’s entire interest is in assembling and cutting out the model. You can collect them for the sake of collection and keep them under glass in a closet.

Garage for cars

If you already have several homemade cars, then you need to keep them somewhere. It is necessary to build a garage or parking for cars. Before you make a garage for cars out of cardboard, you need to select a box of corrugated material of the size we need.

All sides are left, and the top side is cut off completely. The box is turned upside down. Large square holes are cut out on the side for cars to enter.

If you are making a parking lot, then you need to mark out spaces for cars on the roof and, of course, make a convenient exit for them. Children love to roll cars on slides, so an externally placed strip of cardboard glued to one side of the garage can easily play this role.

You can improve your parking lot by adding curbs or garage doors, and painting it beautifully. It’s interesting to cover the box with colored paper, or you can paint it with markers or gouache paints.

Big fire truck

To make such a specialized machine, you need to select a box made of corrugated cardboard. It should not be too thin and high, because the truck is a package turned on its side. Before making a cardboard machine, you need to carefully glue the sides with tape so that the slot is not visible.

Then you need to cut a hole on top so that the hero firefighter can be placed in the car. The wheels can be cut out from another box and simply glued to the bottom of the car. If you want to make them spin, then you need to figure out what they will be mounted on. You can use wooden round flag sticks, for example.

All that remains is to colorfully paint all sides of the fire truck, decorating them with small details: stairs, headlights, windshield, white stripes, you can write a phone number to call the fire department. It is often written on such cars.

Don't forget to applique the warning lights. To do this, use strips of yellow paper rolled into cylinders.

Floor machine for children

Children really love all sorts of large containers - boxes, barrels, even cabinets where they can hide or just climb into. Therefore, before making a car out of cardboard for the child himself, you need to check whether it will fit there, think about where the baby can stretch his legs to make it comfortable.

One box is not enough; you will need at least two, and preferably three, as in the photo below. The trunk and hood of the car are made of two whole boxes, sealing their slots with tape. But you will have to work hard on the middle part. If the child does not fit in the center of the car, he has nowhere to put his legs, then he will need to cut off one side of the box from the middle and also the side of the hood adjacent to it. Then the child, sitting in the center of the structure, will be able to stretch his legs into the space of the first box.

The windshield of a convertible is cut out of the sash by making a rectangular hole in it. Wheels and headlights can simply be glued onto the frame.

As you can see, do these interesting crafts It’s not at all difficult to do it yourself, and the baby’s joy will be endless. The main thing is not to be lazy and want to bring joy to your child.

Many people know that many types of crafts can be made from cardboard. In childhood, probably, any person with imagination and the desire to make something with his own hands made something from such accessible material. Few people know, but there are people who have not given up this childhood hobby and make truly amazing things from cardboard.

Today we will tell you how to make a car out of cardboard.

    Show all

    Beautiful car

    It will surely delight your baby.

    So what we need:

    • At least two pieces of cardboard boxes;
    • Colored paper;
    • Scissors;
    • Compass;
    • Colored pencil or felt-tip pen;
    • Copper wire;
    • Pliers;
    • Glue.

    Cut off the walls of the boxes and draw circles on them, these will be the wheels for our future car. Then cut them out using scissors.

    Having attached the circles to the base of the second box, trace with a pencil the places where the wheels will be located.

    Using an awl or scissors, make holes on the sides where the center of the wheels will be located.

    Cut pieces of the prepared wire as long as the width of the future car. This will be the basis for the wheel axles.

    Using glue, attach the wheels to the pieces of wire threaded through the holes. If you want the wheels of the car to eventually spin, use pliers to pinch the ends of the wire on both sides in the form of loops.

    Then we'll start making the car look beautiful. To do this, use a pencil to draw and color windows and doors, then cut them out with scissors. Or they can be cut out of self-adhesive paper suitable color. If you have time and patience, you can make the doors open.

    In the same way, you can create a cardboard trailer for her, it will be more fun. You can attach it again with a piece of wire.

    By the way, if you get inspired, you can make a few more trailers, then you’ll get a whole road train.

    You will need the following materials for this craft:

    • Sheet of cardboard.
    • Paint, brush for coloring.
    • Glue or stapler.
    • Scissors.
    • Unnecessary and outdated old toys to decorate your car.
    • Seven round cardboard tubes that are left over from toilet paper.

    You paint paper cardboard tubes in different colors in any way - with a brush or using a piece of cotton wool. Then you cut out circles from cardboard, they will serve as cylinders for the car and paint them.

    You glue these wheels to the sides of the car using glue or a stapler.

    And now we will tell you how to make a car out of cardboard using modern computer technology.

    Racing car

    You will need:

    • Paper
    • Printer
    • Scissors

    This type of craft is easy to make; you just need to print it, carefully cut it out and glue it along the drawn contours. You can find any number of such blanks on the Internet; an example of one of these is shown in the figure below.

    How to make a car out of large cardboard?

    Tape all parts of the box together.

    On both sides, draw doors symmetrically on both sides and cut them out using a sharp knife with a thin blade.

    Draw and cut out the windshield in the same way.

    Using tape, secure the bent parts of the ends with an inward bend, now using the same tape to secure the windshield.

    If there are any extra pieces left at the corners, trim them off with a knife or scissors.

    Using the bottom of paper cups, you make wheels for your future car. If you don’t have them on hand, you can simply use round pieces of cardboard of the desired color and size.

    Now color your creation and admire it!

    The simplest and nicest machine

    Shape a piece of paper into a square. For those who don’t know, this is done like this: bend the sheet diagonally and cut off the pieces that protrude beyond the edges. Trim off the excess with scissors.

    Bend the square into two halves, then two more times lengthwise and crosswise. This will show you the fold lines. Now you can expand the sheet.

    Wrap its lower ends to the very top of the middle. Then bend the lower parts of the bent corners on both sides to make wheels.

    Fold everything that comes out in the end in half along the line that is located along the central fold. Bend the lower part up and bend the upper right corner.

    Draw the headlights and other details on the product, paint it in any colors. We hope this simple craft will delight your child.

    Car for girls

    Few parents realize or understand that not only boys, but also girls can play with cars. Below we will tell you how to make a car to carry your favorite dolls in it. I think your daughter will really like this craft.

    So, what you will need to have on hand:

    • One cardboard shoe box;
    • Thick cardboard;
    • Thin paper of different colors;
    • Glue;
    • Double-sided tape;
    • Long wooden sticks in the shape of toothpicks;
    • A small piece of transparent plastic;
    • Any objects that resemble headlights.

    To begin, draw on paper a template of doors that would fit the size of the toy. The usual length of the legs, for example, of a Barbie doll, which girls love so much, is eighteen centimeters.

    Cut the workpiece on both sides and bend the ends of the resulting template inward. We will attach the seats to these ends.

    Then make cuts with a sharp knife where the car seats will be.

    Now cut out even circles from colored and thick cardboard, four pieces each. These will be the wheels.

    Using a needle or awl, make through holes in the center of these circles and then make more of them.

    Cut out the hood and trunk from thick cardboard according to the size of the shoe box.

    In turn, glue each prepared part to the car, then make holes in the box for the wheels.

    Use colored paper to cover the car, then make a windshield using transparent plastic.