How to make a big snowman with your own hands. Plywood crafts - New Year: necessary materials and tools, features of making two-dimensional and three-dimensional structures

If you know how to make a snowman, then you can make it with the children, and they will take creative work to kindergarten or school. This attribute of winter and the New Year is created from various materials, from unnecessary things.

To make such a funny character, you can use socks that are out of fashion, or that have become small for your child. For work you will need:

light sock;
colored sock;
synthetic winterizer;
rubber bands;
yarn white color;
buttons;
needle with thread.

The size of the socks depends on what size you want the snowman toy to be. You can use small or large. Take a sock, fill its bottom 3 cm with rice.

The white grain is not visible through the fabric. Such a filler will help the structure to be stable. If you do not have rice, and the sock is dense, you can pour another light cereal into it, for example, millet.

Place a padding polyester over the cereal, thus filling the sock to the heel. Make small balls on the right and left by pulling the sock with pieces of padding polyester with an elastic band - you get blanks for handles. Just above this place, in the middle, also tie the sock with an elastic band. This is the throat of a snowman from a sock. Now we need to make his head. To do this, fill part of the sock with padding polyester above the neck, round it, tie it with an elastic band on top.

Shows how to make a snowman with your own hands photo above. Looking at it, you will understand that at this stage you need to replace the elastic bands with white yarn.

Next, we make a hat for a funny character. A colorful sock will do for her. Put it on the head of this helper of Santa Claus and tie it on the back of the head with a thin elastic band. The length of the hat can be any, cut off the excess, tie yarn instead of an elastic band. Customize the tip of the cap to your liking by notching its edge, or leave it as it is.

Now let's start creating the face. Buttons of blue color will serve as eyes, and brown - as a nose. Sew crafts on his stomach with three black buttons, make a scarf with fluffy ends from the scraps of the sock and hang it around the snowman's neck.

The next craft is no less interesting - the idea will tell you what use can be made for used plastic cups. If you have a lot of them, then you get a big snowman. It can be placed in the office, on the street, next to any institution. It will decorate the building and attract the attention of passers-by.

DIY snowman from plastic cups

For this craft, in addition to empty containers, you will need a stapler. For decoration you will need:

carrot;
colored paper;
cardboard;
textile.

Start by making the top ball. To do this, fasten the cups together with a stapler, applying them exactly to each other, with the bottom in one direction. Soon they themselves will take the desired shape of a circle. In the same way, you will make the second half of the snowman. The top ball should be smaller than the bottom one.

Both of these figures are circles, you don’t need to finish it to the end, the bottom must remain free so that the snowman from plastic cups was stable.

Connect his head to his body with a stapler, tie this place with a scarf from corrugated paper. From it, or from ordinary colored paper, you will make buttons, the eyes of a figurine. For the nose, you can put a carrot in a glass, cutting a circle of small diameter in it, as shown in the photo, or make it out of cardboard.

How to make a cylinder headdress is also seen in the figure. Cut out a rectangle and a circle from cardboard. The length of the longest side of the rectangle should be equal to the diameter of the circle. You will also need a rim for the cylinder, in the figure it is numbered 3. Cut out blanks from colored or white cardboard, painting them in the desired color. You can cut the same blanks on fabric, cut them out and stick them on cardboard. Now all the details need to be glued, as shown in the figure, and you can put the cylinder on the head of the New Year's snowman, created by yourself.

There are many ideas for such creativity. As a result of the implementation of the next one, the craft will turn out to be openwork and airy. In this technique, you can make a new lampshade for the lamp.

In addition to the materials listed, you will need:

5 balloons of different sizes, for the body - large, for the head - less, for the handles - even smaller;
white threads;
PVA glue;
brush;
for the eyes 2 black buttons;
a little orange for the nose polymer clay;
big needle.

The exciting process begins with inflating balloons. You can involve the whole family in this. Now you need to wrap each ball with thread. To prevent the balls from bursting, this is done carefully, without pulling the threads too much.

Now generously grease the windings of the balls with PVA glue. It should cover all sections of the thread well. Hang the balloons by the ropes with which they are tied up at the top, let them dry well. To do this, it is better to leave the blanks for the night, then your morning will start very fun, because now you need to burst all the balls with a needle. After that, take them out through the holes between the threads.

Now put the largest workpiece on the floor or on some kind of base. Attach a slightly smaller ball to this large ball, and on top - the head of a snowman made of thread. Glue its handles in the same way and let the blanks dry.

There are finishing touches left. A beautiful nose is made from polymer clay or cardboard. For the latter, it is cut out in the shape of a triangle, then one side is laid over the other and the junction is glued together. Sew the button eyes in place, make a headdress, as in the previous case, and the snowman from the threads is ready.

To make a polymer clay nose durable, mold it in the shape of a carrot, and then put it in boiling water for 8-10 minutes. Then the workpiece will become hard and at first glance it will be difficult to distinguish it from a real carrot.

knitted snowman

You can decorate a sweater, potholder, decorative pillow with such a figure. How such knitted snowmen are created schemes clearly demonstrate. This one shows that you will need threads of eight colors.

Color by number:

- white;
- yellow;
- violet;
- red;
- blue;
- sea wave;
- blue;
- green.

If you do not have a yarn of a certain shade, you can replace it with another one. So, a hat, scarf, character's legs can be of a different color.

Such a knitted snowman is made using the technique of the front surface. That is, on the front side you will knit with front loops, and on the back - with purl loops.

To change the color to another, twist the thread of the desired shade with the one with which you finished knitting the last loop. Then the junction of different yarns will be imperceptible, and done neatly.

A knitted snowman with knitting needles is created from the first loop of the bottom row. In the diagram, this is the lower right corner. As you can see in the figure, 10 loops are knitted from right to left until the number 20, and then another 7 loops with a blue thread. Next, the snowman's leg begins. Twist yellow with blue thread, knit yellow 6 facial loops. To the end of the row, also knit facial, but with blue yarn.

Turn the work inside out, knit 39 loops with blue yarn, then 8 with yellow yarn and the remaining 16 with blue yarn. In the same way, focusing on the snowman knitting pattern, create the entire canvas. It consists of 92 rows, and 60 loops are used horizontally. In diagram 1, a cell is one loop.

When you need to finish knitting a piece of a certain color, cut and tie the end of the thread so that it does not unravel. Threads, when alternating colors, you should have on the wrong side.

To make the drawing look good, after completing the work, put the connected snowman on the front side, wet gauze or cloth on it and iron it with an iron. If your knitwear uses a ribbing pattern, it does not need to be ironed or it will stretch.

Snowman for kindergarten from a plastic yogurt bottle

If your beloved child was asked to make such a New Year's attribute, use improvised materials for this. Even Small child will be able to make a toy using an empty container from under the "Rastishka".

A snowman from a bottle is easy to make, for him, in addition to her, you will need:

green corrugated paper;
glue stick;
scissors;
soldering iron;
a piece of red plasticine or cardboard of the same color.

Remove the label from the bottle. Fold a rectangular sheet of paper to make a narrow strip, start wrapping it around the neck of the bottle, remembering to shape the neck. So you will simultaneously close the hole and make a hat for the snowman with your own hands.

Now make a hole in the bottle with a soldering iron. If you are creating a craft with a child, take on this part of the work. And let the baby roll a piece of plasticine between the palms in the form of a snowman's nose. Attach it to the resulting hole, you can use it for the nose and a folded piece of colored paper, cardboard.

Snowman making is one of the favorite outdoor activities of all children and even adults. In the winter season, almost every street is decorated with these funny round men. It is possible to make beautiful New Year's snowmen at home. A fascinating process and an amazing result will delight all family members, including even the smallest.

How to make a snowman with your own hands. sock snowman

What you need

To make your own snowman at home, you will need the following tools and supplies:

white sock;
sugar or rice;
thread with a needle;
scissors;
glue;
woolen threads or floss threads;
toothpick;
red marker;
various decorative elements: beads, ribbons, buttons.

The process of making a snowman from a sock

First, cut the sock as shown in the picture.

Next, fill the whole part of the sock with sugar to make a small bag. Tie the resulting bag of sugar well with threads.

Now you need to form the body of the snowman. To do this, take the threads and tie the snowman so that you get the body and head.

Decorate the snowman's face. To do this, take a toothpick and cut off a small piece from it, which will serve as a nose for the snowman. Fix the nose with ordinary PVA glue. Sew on beady eyes or buttons with a thread and a needle, and draw a radiant smile with a red felt-tip pen. The snowman is almost ready, it remains to decorate it!

Making a snowman hat

In order for the snowman to take on a finished look, you need to decorate it. To do this, make a hat from the rest of the sock. Its very easy to make. To do this, tie one part of the sock with thread and turn it to the other side. The hat is ready.

If desired, the hat can be decorated with a pompom. To make it, you need not sparing the threads, wind them around several fingers. Tie the floss threads in the middle and form a pom-pom out of them. You can make a fluffy pompom in another way. To do this, cut out a small hoop from cardboard. Wrap the threads well around the hoop and cut them as shown in the photo. Form a pom-pom and sew it to a pre-prepared hat.

snowman decoration

The finished snowman needs to be decorated so that it takes on a more festive and New Year's look. To do this, you can use various rhinestones, decorative ribbons and even ordinary tinsel. Glue a few rhinestones symbolizing buttons to the snowman's body, warm it with a scarf or make it a beautiful bow.

You can even sew a warm blouse or coat for him.

How to make a snowman with your own hands from threads

Another fairly simple option for making a snowman at home is a snowman made of thread!

Surely each of you is familiar with the manufacturing technique decorative balls from threads and PVA glue. It is from these balls that the future snowman will consist. In order to make such a snowman, you will need:

a pair of balloons;
cotton white threads;
PVA glue;
needle;
any decorative accessories for decoration.

Manufacturing process

Inflate two balloons to the size you need. Remember that one of them will serve as the head of the future snowman, and the other will be his body.
Soak the threads well with glue and wrap them around two balloons.

Leave the balls wrapped with threads to dry until completely dry. It is best to leave them overnight.

After that, carefully pierce with a needle air balloons and remove any leftovers.

From the remaining thread frame, make a snowman. To do this, you need to fasten these two balls of thread together with PVA glue. Snowman is ready! It remains to make him a face. To do this, you can use buttons, threads, felt-tip pens and colored paper, with which you can make a snowman's mouth, nose and eyes.

Thread snowman decoration

Leaving a snowman in this form will not be entirely correct, so start decorating it. To do this, you can use any decorative elements, from ordinary buttons to Christmas tree tinsel. You can sew a cute felt hat for him on his head, or you can buy a ready-made one.

Even a child can cope with the manufacture of such snowmen, so you can safely involve your children in this exciting and useful activity!

In this article, we will show what crafts in the form of snowmen you can do with your own hands from improvised materials.

Of course, you can and should make real characters out of snow! For example, :

But what if you live in the south, and there is snow only somewhere high in the mountains? Or is there enough snow on the street, but do you want to settle a cheerful non-melting friend at home? Or maybe in kindergarten or school exhibition winter crafts and urgently needs to be done small miracle with your own hands?

Then our ideas, photos and workshops on making snowmen are for you!

If you want to replenish our collection, send a photo to the competition "". So, from what you can make a craft "Snowman", see the options with photos and videos.

Cotton snowmen

Cotton wool is a material that looks very similar to snow in its lightness and whiteness. It is not surprising that a lot of handicrafts are made from a lot. In order for the snowman to keep its shape, they prepare a base of foil, plastic bottles, burnt out light bulbs or just lumps of paper, and cotton wool is already glued on top.

Step by step description

Cotton toys carry a special atmosphere. They are very light, pleasant in the hands and do not break. Everything that is required for work can be found in every home. This master class by Svetlana Satina shows how to make a snowman from cotton wool and PVA glue.

Materials:
- cotton wool
- newspaper or magazine
- foil,
- white paper napkins
- threads
- PVA glue,
- brush,
- toothpick,
- awl
- twine thread,
- Red ribbon,
- Acrylic paints or watercolours.

Progress

We roll three balls of different diameters from an old newspaper. We connect them together and fix them tightly with foil.

Zigzag cotton is more suitable for creating toys. It easily splits into strips and is easier to work with. We divide the cotton into strips and wrap them around the snowman, tightly winding them with threads. White threads are more suitable for work, as they are easier to mask with pieces of cotton wool. We try to pull the thread so that it lies in different directions. We increase the cotton mass until the figure of the desired shape and size is obtained.
Keep in mind that wet work awaits us ahead, after which the snowman will add in volume.

The figure in rough outlines is ready, now you can do the details. Dilute PVA glue in half with water to make it more liquid. If such glue was not at hand, it can always be replaced with a paste. By the way, our ancestors worked with him. The only downside of the paste is that after drying it gives yellowness.
Again, we split the cotton into thin pieces and glue the workpiece with them, carefully smearing the cotton with glue. In the process of work, we try to smooth all the layers as tightly as possible so that the toy turns out with a good crust after drying.

While we are working with wet cotton, we smooth it all the time with our fingers, trying to press harder to expel excess air.
From two identical strips of cotton we form handles and glue them to the body. We make a small cotton cone and glue it in place of the nose. With a toothpick we draw a line of the mouth, we outline the eyes with it.

In general terms, the snowman is ready, it's time to send it to dry. It takes several hours, sometimes even a day. Some people dry the figures on a battery to speed up the process, then the shrinkage of the material is less even.
When the toy is completely dry, we begin to form it further. From white paper napkins put on a hat. We fold a dry napkin in a spontaneous way, as if creating a headdress. We coat the impromptu hat with a large amount of glue. We are waiting for the napkin to get completely wet, and make folds on the hat.

To make a scarf, cut the napkin in half, fold it several times in width and apply glue to the inside and smooth it with your finger right on the table. Then we wrap the scarf around the snowman's head, beautifully distributing the folds. If anyone has plain colored napkins on hand, then you can also make clothes for a snowman from them, in the future they will not have to be painted. At this stage, we again send the toy to dry.

How to color a snowman

Our snowman is dry and ready for further action.

To paint the toy, we take yellow acrylic paint, dilute it with PVA glue and apply it to the scarf and hat. While the yellow color dries, paint the nose of the carrot orange. We draw a mouth in red, put black dots in place of the eyes, outline the eyebrows. With the same color, we apply light dashes on carrots, imitating cracks.
Acrylic paint dries quickly and you can start decorating the scarf and headdress. We draw stripes on the scarf in red, put white dots. We collect red paint on a flat brush, lightly wipe it on a napkin and with a dry brush we pass along the top of the hat. In general, the snowman is ready, but something is missing. Among New Year's toys there was a small golden ball that fit well on the snowman's hand.
In this form, the cotton wool snowman has a complete image. If there is no purpose to hang it on a Christmas tree, then the work can be considered finished.

To decorate with a toy New Year's beauty, you need to make a puncture in the upper area of \u200b\u200bthe cap with an awl. We thread a twine cord through the hole with a crochet hook, tie a knot and decorate with a red ribbon.

Now the toy is completely ready. And here he is with a friend.

Creative and cheerful snowman Olaf from Frozen -

More options on how to make cotton snowmen, such crafts are within the power of every child:

Simple but spectacular crafts are made from cotton pads.

"Snowman". Trushina Lydia, 8 years old.
The base of the snowman is made of paper and covered with cotton wool. Cardboard hat and cap. The Christmas tree is made of colored cotton pads.

From plastic cups

"Snowman". Dmitrachkova Valeria Valerievna

Video from the YouTube channel, how to make a snowman from plastic cups:

Snowman from a plastic bottle

sock snowman

Vorsina Lyudmila Leonidovna, the work was carried out jointly with Vorsina Luchesara.

Sock snowman. Materials: white clean sock, knitted scarf, sequins, beads, buttons, synthetic winterizer inside.

Everything is sewn with a regular thread, a scarf is tied.

Video "Sock snowman in 5 minutes":

"Visiting the Snowmen" Alferov Alexey.
The work is made of pieces of fabric, cotton swabs.

Snowman in the technique of sculptural textiles -:

From fabric

Snowmen from felt

The master class was prepared by Zakharova Olga Mikhailovna.

Materials:

Felt: white, blue, red, orange, black, sky blue,
glue "Moment",
braid,
needle and thread,
half-beads of black color, (for eyes),
two buttons
piece of white fur
synthetic winterizer (batting),
wheel white.

Description of the work, step by step:

1. Cut out a snowman pattern from white felt (2 parts).

Between them is a layer - synthetic winterizer. We sew both halves.

2. We cut out mittens, mittens, a hat, a scarf from a synthetic winterizer of red (blue) color. Glue with glue "Moment" on the snowman.

3. We glue the braid on felt boots, mittens, a hat and a scarf.

4. We sheathe the snowman with a white braid (rubber).

5. Cut out and glue the eyes, mouth, cheeks, nose. Glue on the buttons.

Homemade snowman is ready!

Video how to quickly sew a snowman from fleece:

"Snowman". Verenich Olga.
The snowman is sewn of cotton material and filled with padding polyester. Small details and a hat are sewn from felt. Painted with watercolors. The buttons are made from salt dough. The scarf is made of wool.

"Snowman". Zakharova Olga Mikhailovna
Made of fleece, the hat and scarf are knitted and decorated with beads.

"The snowman hurries to the Christmas tree." Shekhalev Yaroslav.
Sequins, beads, felt, cardboard.

"Snowman". Sudarikov Ilya.
Made from foam balls coated with acrylic embossed snow paste. Hat, scarf, mittens and felt nose. Wire handles with tinsel. Decorated with rhinestones.

"Snowman". Sementsova Natalia.
The work is made of cut threads.

Snowman Olaf. Sudarikov Ilya.
Sewn on a pattern of felt.

paper snowman

In this master class, I will show you how to make a fun snowman out of a cardboard tube from cling film, foil or a sleeve from toilet paper. Such a funny craft will not leave indifferent any child. You can decorate with it or play a festive performance. Make a few of these toys, and now the winter collection of crafts will be replenished with new original characters.

To make a snowman, you will need the following materials:

With a black marker, draw a snowman's face and buttons on the tube. If desired, you can color it with colored markers, pencils or paints. You can also decorate the craft with sparkles, decorative glue, stickers.

Glue bamboo skewers on the back of the craft using a hot glue gun. From plasticine, make a nose in the shape of a carrot. Glue hair from colored paper. Make cardboard legs. To do this, glue two circles from below with a thermal gun. This is the final snowman!

Made from paper napkins snowman. We mixed 1 third of water and 2 thirds of PVA glue, dipped white napkins in this mixture and rolled balls out of them, connected our blanks when wet and let our snowman dry, then glued bead eyes, a cardboard nose and a cap to it, drew a mouth with a felt-tip pen . The snowman is ready. (from the master class "" of the Vasyukov family)

New Year's decor of chocolates in the form of a snowman

Get sweet gift it is always pleasant, and if it is also decorated in a special way, then the surprise will be doubly pleasant. An ordinary chocolate can be decorated using the popular winter image of a snowman. This is a unique gift for the New Year. It can be made for a baby, put a sweet treat in disguise under an elegant Christmas tree. Or the child himself can make such a New Year's craft to give it to someone. The snowman will turn out cheerful and mischievous.

What you need to prepare for decorating chocolates:

the chocolate bar itself - a traditional tile;
white paper, colored paper;
yellow and red fluffy pompoms;
green paper - plain or corrugated;
decorative tape with beautiful pattern or rep tape;
doll eyes or black pen;
scissors;
glue or double sided tape.

How to decorate a chocolate bar for the New Year in stages

1. Take a sweet gift and prepare everything you need for work - paper, fluffies, eyes. If there are no pompoms, then they can be replaced with real buttons or half beads. The snowman will be white, so a regular sheet of white office paper is suitable as the main material. Any Christmas-themed items you have will work.

2. Gently wrap the sheet around the chocolate bar, leaving a sweet gift inside. The top and bottom pieces can be left unfolded to use less glue. Glue only the back wall using glue stick or double-sided tape. You can wind the paper in one or several layers so that the pattern of the chocolate bar does not shine through, and it is a surprise for the child what is inside. Top and bottom parts can be trimmed with scissors as desired. Before you is a white rectangle, which is the basis of the craft. Next, you need to turn it into a snowman.

3. Take a beautiful decorative or plain ribbon and stick it on to mark the head and torso, draw out a small ponytail. The transverse strip will visually divide the figure into 2 unequal parts. The ribbon will become the snowman's scarf. At the top, attach doll eyes or draw them with a black pen.

4. At the bottom, attach 3 yellow pom-poms in the form of buttons, and place a carrot near the eyes. This snowman decor is quite traditional. Cut out a carrot from orange paper. This is a nose.

5. Make a hat using black or purple paper. Prepare a cylinder, stick 3 red pom poms on it and glue green leaves to get a Christmas flower.

6. When the hat is ready, stick it on the top of your head. Glue a decorative ornament - a heart, in the area of \u200b\u200bthe heart, complementing it with rhinestones. An interesting sweet gift for the New Year for a child is ready. You can make a whole basket of such products, using not only the image of a snowman, but also the famous Santa Claus, Snow Maiden, deer, penguin and so on. Fantasize, introducing to the fascinating creativity of children who are very fond of sweets.

Another paper snowman

Snowman in papier-mâché technique -

"Snowman". Gronskikh Sofia.
The snowman is made of colored paper and cardboard. Multi-colored napkins are used for decoration.

"Snowman". Svintsov Vadim.
The snowman is made of corrugated paper. Decorated with a knitted hat and scarf. Inside the snowman is filled with padding polyester.

"Snowman". Svintsov Vadim.
The snowman is made of modules in the technique

The New Year 2019 of the Yellow Earth Pig is approaching, and each of us is preparing for this wonderful holiday. Someone plans to celebrate the holiday at home, with family, and someone, on the contrary, in a noisy company of friends, on the street. In both cases, I would like to decorate the New Year's meeting place beautifully. Usually, the New Year's decoration of the dwelling consists of a Christmas tree, all kinds of garlands and beautiful festive compositions from Christmas tree branches and tinsel. On the street, traditionally, a snowman is made from snow and decorated with various funny accessories. But what if you want to have such a funny snowman in your apartment, or it so happened that there is little or no snow on the street? For such cases, we offer some great ideas on how to make a snowman on New Year 2019 with your own hands from improvised materials.

Snowman from plastic cups

In order to make such a rather unusual snowman, you should not work for a long time, because creating such a miracle is as easy as shelling pears!

For manufacturing you will need:

plastic cups - 300 pcs.;
PVA glue or stapler;
plasticine.

Progress:

30 glasses should be laid out in a circle and fastened together with a stapler or glue. The first row is ready. According to the same principle, we make the second and all subsequent rows. For each next row, fewer and fewer glasses will be required, since they are conical in shape. Thus, the first lump should turn out.
The next com should have more round shape and smaller sizes. We take 22 plastic cups and form the second ball in the same way as the first. After that, turn it over and lay out the missing rows. If desired, you can make a third lump, however, in this case, it may be too unstable.
Connect both lumps and make sure that everything turned out correctly and evenly.
Let's start decorating. Make eyes out of black plasticine, and a nose out of orange. Put on a hat or cap. You can also use a scarf, ribbons, fabric and other elements for decoration.
You can put under the snowman Christmas garland, in which case it will also glow. The main thing: show your imagination! Such decoration can be installed in the house or on the street.

Master class on making a snowman from plastic cups

Snowman from threads

One of the most simple options how to make a snowman for the New Year 2019 with your own hands, this is with the help of ordinary threads. It looks original and is done, surprisingly, quickly and simply.

skein of white thread,
PVA glue,
Balloons - 5 pcs.,
cotton wool,
Needle.

Progress:

First of all, you need to inflate Balloons, they will be the body. 3 - different sizes and 2 - the same (for hands).
Use a needle and thread to pierce a jar of PVA glue. The thread must be saturated with glue. We remove the needle, and wrap the inflated balls with a thread, previously smeared with a small amount of vegetable oil(so that the thread does not stick to the ball). Try to wrap the balls as carefully as possible so that there are no gaps at all. Once all balloons are wrapped, place them in a warm place to dry completely (at least 24 hours).
After that, pierce each ball with a needle and remove its remains by the tail.
We sew all the parts with white threads. For maximum effect, you can coat the stitching points with glue. Leave it until completely dry.
Eyes can be made from buttons or beads, nose and mouth - from colored paper. Put on a hat and scarf. Our snowman is ready for the New Year!

Master class on making a snowman from threads

beer cap snowman

A snowman made from beer caps for its manufacture does not require great creative skills. Even a child can easily build such a New Year's craft with his own hands. And since a snowman from ancient times is considered a good helper in the fulfillment of cherished desires, such a craft will not only serve as an element of decor for you, but also attract good luck and luck to your home.

To make you will need:

bottle caps;
Acrylic paints - white, black, orange, red;
brushes;
Ribbon;
Hot glue;
Buttons;
Scissors;
Glitter (optional).

Progress:

Take three caps from the bottle and paint them white, and then glue them with hot glue.
Glue a red ribbon on the back of the future snowman, making a loop at the top.
Using a thin brush, paint the eyes, nose, mouth and buttons on the snowman.
We tie a thin ribbon that will serve us as a scarf between the first and second covers. To make it more beautiful, you should glue a button or other decorative element that you like.

Our cheerful snowman is ready for the New Year!

Christmas craft "Chocolate - snowman"

New Year holidays in every family, of course, are not complete without sweets. But, given the fact that the New Year is a time of magic and the fulfillment of all cherished desires, you should definitely turn an ordinary chocolate bar into a pretty cute snowman, thereby intriguing your children. beautiful packaging made by hand.

You will need:

white or blue paper;
Scissors,
black marker,
PVA glue,
Orange corrugated paper;
Scarf and hat (can be made from a sock or from corrugated paper);
Spruce branch with beads or other decorative elements.

Progress:

We take a clean sheet of paper and wrap a chocolate bar in it, and so that it does not unfold, we glue it with PVA glue.
On the finished snow-white tile, draw the eyes of a snowman with a black felt-tip pen, and form a nose from a small rectangular piece of orange corrugated paper, wrapping it tightly in a cone and gluing it with glue.
We draw a smile with a black or red felt-tip pen, and create a blush on the cheeks with a red pencil, with which we make a shading on a small piece of white paper, and then lightly rub the cheeks with it.
From the sock we make a hat and a scarf: cut it in half and sew one part, where the heel remains, with a needle and thread. From the top of the cap, pulling it with a thread, we create a bubo. To make the hat seem mischievous, sit slightly obliquely, we tighten one side of it with a thread.
We cut the scarf in a semicircle from the second half of the remaining sock and tie it around the neck of the snowman. So that the ends of the scarf do not stick out in different directions, we fix them to the tile itself with double-sided tape. We decorate the scarf with spruce twigs and beads or something to your taste. Ready!

Master - class for making chocolate - a snowman

Candy snowman

Creatively enough, you can make a snowman for the New Year 2019 with the help of candies, it will fit perfectly on your holiday table or next to the tree.

For manufacturing you will need:

Sweets "Raffaello";
Styrofoam balls (one small, and the second - a little more) - 2 pcs;
White paper;
Glue is hot;
Toothpicks - 3 - 4 pcs.;
Scissors;
Foil;
Chenille wire (fluffy, flexible);
Silver cardboard;
Rain.

Progress:

We take two foam balls and glue them with white paper.
We connect the finished glued balls together, put them on top of each other (a small ball on a large one), put them on toothpicks, and fix them with hot glue.
We make mittens: cut out mittens from foil and insert a small candy into them and glue it inside with hot glue.
With the help of chenille wire, wrap both mittens around the edges, making them fluffy and twist it at the base of the mittens.
We glue the resulting snowman with sweets: we glue the bottom ball in three rows, at a short distance, and on the top - three candies.
We wrap the entire snowman with rain, securing it with hot glue. We put a cap made of silver cardboard on our head and put it on glue as well.
On the face we glue eyes taken from an old soft toy, a nose from gold foil, a mouth from red rain or other material.
We glue the mittens, and then the legs, made using silver cardboard in an oval shape. Well, that's it!

Cotton snowman

Such a craft will certainly interest the guests of your house, and for sure, none of them will immediately guess what this beautiful snowman is made of.

We will need:

A bottle of deodorant
PVA glue,
cotton wool,
buttons,
beads,
Ribbon,
Crepe paper.

Progress

Carefully cover the bottle with cotton wool using PVA glue and put it in a warm place to dry. Attach a scarf (ribbon) with glue.
Sew a few small buttons on the body. From beads make eyes, from crepe paper - mouth, eyebrows and nose. It will be very fluffy and soft.

Master class on making a snowman from cotton wool

balloon snowman

This is probably the simplest New Year's craft, which even a schoolboy can do with his own hands.

For manufacturing you will need:

multi-colored markers or felt-tip pens.
modeling ball - 1 pc.,
white balloons - 2 pcs.

Progress:

We inflate white balloons of different sizes and tie them together using threads or ponytails.
We inflate the balloon for modeling and fix it in the form of a scarf where the white balloons are connected. Draw the eyes with a black marker, a nose with an orange marker, and a mouth with a red marker.

Master class on making a snowman from balls

sock snowman

It will take quite a bit of time and effort to make such a snowman for the New Year.

Materials:

white socks,
Two buttons
Scissors,
Rubber.

Progress:

Cut off the elastic from the sock.
From the wrong side, secure it with an elastic band and turn it inside out.
Now fill the sock with rice and cotton.
Give the snowman shape using an elastic band: secure it in the middle.
Make eyes out of buttons, put on a hat and scarf. It will be a great souvenir or Christmas tree decoration.

Master class on making a snowman from a sock

fabric snowman

From fabric, you can make with your own hands not only a unique snowman, but also an excellent soft toy for your child.

We will need:

white cloth,
threads,
Needle,
buttons,
Sintepon,
Ribbon,
beads,
Cardboard.

Progress:

Sew a small bag out of white fabric, then fill it with padding polyester.
With thread, tie it tightly in two places to form the head and torso. Sew a ribbon on the ends of which fasten the beads.
Make a nose out of red cardboard, and eyes out of buttons. You can tie a checkered scarf around your neck.

Master class on making a snowman from fabric

Light bulb snowman

Did you know that an original Christmas decoration can be made from an old light bulb? It's very easy and simple!

Time passes very quickly and, despite the fact that now there is no smell of snow, the winter months will not be long in coming! The New Year 2019 will soon come, the symbol of which is the Yellow Earth Pig. Pragmatic people prepare for everything in advance, maybe we should learn this so that the holiday does not take us by surprise. It's time to think about where and with whom to celebrate the New Year, as well as how to decorate the venue for the celebration. Of course, here traditional tinsel on the Christmas tree, garlands, all kinds of snowflakes and other attributes of the main event will come to the rescue. winter holiday. In order to plunge into childhood, you can build a real snowman near the house, dressing him up with a hat in the form of a bucket and providing him with a carrot nose and a broom for complete harmony. Why not do it at home? In this article, we will tell you some great ideas on how to make a snowman for the New Year 2019 with your own hands from improvised materials, which is perfect for both!

Corrugated paper snowman

A wonderful snowman can be made from ordinary corrugated paper. Even a child can handle this job.

You will need:

Corrugated paper (black, red and white);
Plasticine (it is better to take plasticine of a light shade);
Toothpicks.

Progress:

We take plasticine and roll “snow” balls out of it for our snowman according to the principle from large to small.
Now you need to make squares of white corrugated paper. Cut out squares measuring 20 by 20 mm from paper.
Then, in turn, put a toothpick in each paper square and turn it into a tube. Thus, we make a tube on a stick. This must be done with all squares.
The resulting tubes on a stick, starting from the bottom, are strung on a plasticine snowman. Pay attention, we stick in a circle not very tightly to each other. So we cover the snowman completely. The result is a cute paper snowman.
Then we make his hands out of black corrugated paper.
Using red paper, we make a bucket for the head and spout.
Our snowman is ready!

simple and interesting option from improvised material that everyone has: burnt out lamps. Be careful! Don't break!

For this you will need the following items:

Actually the lamp;
Paper napkins or toilet paper;
Paper glue;
Paste;
Acrylic paints;
Paint brush.

Manufacturing progress:

Using a paste, the light bulb must be pasted over with toilet paper or napkins according to the papier-mâché principle.
We are waiting for complete drying.
Now we cover the entire surface of the lamp with white acrylic paint, imitating snow. It is better to do this in several layers.
After the paint dries, you need to draw eyes, nose and mouth, decorate the snowman with rhinestones, stickers of your choice.
With the help of a rope, we make a loop and hang our finished snowman.

Snowman from plain colored paper

Handsome snowman from plain paper, which can be easily done in a very short time. By the way, if you make a lot of such crafts, fasten them with a ribbon, you get an original garland.

For manufacturing you will need:

A4 white paper, it is better to choose a thicker one - 2 sheets;
Multi-colored paper, which will be needed to make an outfit, nose and scarf;
Black marker;
Scissors;
Glue;
Sequins, rhinestones, buttons;
Paper mold for cupcake;
Coin.

Progress:

We cut one sheet of white paper into strips along, the second - across.
We collect the resulting strips into a ball, fixing with glue.
Now you can draw or glue the snowman's eyes, nose, buttons.
Cut out a long strip of colored paper - this will be a scarf. We glue it.
Use a paper cupcake pan as a hat.
For the stability of the snowman, glue a coin to its bottom.
Springy funny snowman is ready!

Snowman from paper towel or toilet paper rolls

This simple snowman can be made from ordinary toilet paper rolls or paper towels! Try this craft with your kids.

You will need:

Sleeve from a paper towel or toilet paper;
White paper;
Colored markers;
colored paper;
Old colored socks;
Felt for decoration (optional)

Manufacturing:

We take the sleeve and carefully glue it with white paper.
With colored felt-tip pens, draw the snowman's eyes, buttons on his stomach.
From colored paper, cut out and glue the nose and scarf.
We cut out a hat from an old sock and put it on a snowman. You can also make a scarf.
The miracle snowman is ready!

Snowman made of cardboard and cotton

Quite with young children, you can make a snowman out of cotton wool and cardboard. Parents will need to help the kids quite a bit.

For manufacturing you will need:

Cardboard;
Cotton wool (can be in balls);
White paper;
PVA glue;
Colored markers;
Small twigs (wash and dry beforehand);
Disposable plate.

Progress:

On the cardboard we draw a silhouette of a snowman from three balls.
Cut out the resulting shape.
Pour PVA glue into a saucer.
We lay out the cotton wool into pieces or scatter ready-made cotton balls. Dip the cotton wool in the glue and glue it on the cardboard figure of the snowman. Thus, you need to glue the entire surface on one side.
On the reverse side we glue our prepared twigs-handles.
It remains to draw or cut out eyes, carrot nose, mouth, buttons from colored paper.
Snowman is ready! You can glue a loop to it so that the craft can be hung on a Christmas tree, you can use disposable plate lay the foundation for sustainability.

Snowman from yogurt cups

If you want a cool idea for a creative snowman, then here you are. Surely, you have a small number of plastic bottles of drinking yogurt or kefir lying around at home?! Invite your kids to admire your masterpiece and help create such beautiful crafts!

For work you will need:

a bottle of drinking fermented milk product;
a plastic cup of yogurt;
colored paper in red, orange and black;
scissors;
glue;
small foam ball;
White paper;
stationery knife;
black nail polish.

Manufacturing process:

To create an unusual little snowman, you will need to take one medium-sized plastic bottle and a foam ball that matches the size of this container.
With a stationery knife, carefully cut a hole in our ball so that you can put it on the neck of the bottle. This will be the head of our product.
After the torso has loomed, we will need to put a hat on the glue - it will be a glass of yogurt.
From colored paper we cut out the hands of our fairy-tale character, a broom, a scarf, a nose with a triangle and a mouth - a smile. We attach all the elements with PVA glue.
We make eyes and buttons on the body from ordinary nail polish. That's the whole trick of our craft! Create a lot of these crafts with your child, place them all over the house: on the windowsills, on the chests of drawers, on the kitchen and holiday tables! Surround them with tangerines and sweets, rain and tinsel to feel the mood of celebration!

Cool snowman made of metal caps

With a snowman made of plastic bottles, we seem to have told you everything, and now the task for your husband is to collect a small amount of metal caps from beer or lemonade. Yes - yes, exactly, covers, since we will have to make a cool snowman out of them, as in the photo. If you want to know more about this, then proceed immediately to our step by step wizard class.

For work you will need:

metal lids from beer;
hot glue;
glitter nail polish;
nail polish orange and black;
red yarn for a scarf;
satin ribbon for attaching to the Christmas tree.

Manufacturing process:

We take three metal covers and fasten them together with hot glue.
Then we transform the inner white part of the lid with glitter nail polish so that they shine under the light of mechanical lights.
We make out the face of the Snowman. For this purpose, we need to use black and orange nail polish. We draw eyes, a mouth and a nose - a carrot. It would also not hurt to depict the buttons on the body of our handicrafts, created with our own hands from improvised materials.
Here our fairy-tale character came to life, smiling cheerfully and fervently at us, but the red scarf made of soft knitting yarn is not enough to complete the picture. We cut off a small part of the threads and tie it around the neck of the snow hero to our taste.
It remains only to attach at the base of the head satin ribbon so that you can easily hang our snowman on the Christmas tree for the New Year 2019.

Cotton wool snowman master class

Thanks to this master class, you will be able to make a snowman with your own hands in just 30 minutes, which will perfectly decorate the Christmas tree for the New Year 2019. It is done quite easily, you can even make it with children.

You will need:

sequins;
soap;
cotton wool;
water;
glue;
bright orange paint;
beads;
small branches.

Step-by-step instruction:

So, cotton wool, if it is rolled up in a dense lump, needs to be fluffed up.
We wet our hands in water and lather, after which we roll two balls out of cotton wool, one larger, the other smaller.
It will be very easy to roll the balls. The glue is slightly diluted with water, after which we lubricate the cotton balls with the resulting mixture.
We connect the balls with a toothpick - put cotton balls on it.
We cover our Snowman with a layer of sparkles that will create the illusion of a snowball.
How to make a nose - a carrot? Wrap some cotton wool around the tip of the toothpick, then paint it with bright orange paint.
Break off a toothpick with cotton wool and insert it into the ball - the head.
We make the eyes and mouth of a fairy-tale character from black beads, and the handles from twigs.
Let the craft dry for about three to four hours.

Making a snowman out of thread

You already know how to make crafts from cotton wool, and now let's try to make a snowman from threads and glue for the New Year 2019. Look at the photo and instructions below and try.

You will need:

white thread,
glue,
three balloons.

Preparation method:

We inflate balloons of three different sizes - the “head” and two balloons for the body.
We take the first ball, coat it with glue and, holding the tip, wrap it around the entire area with threads.
After winding the first layer, we spread the threads with glue, after which we make another layer.
We set the ball aside, giving it time to dry. In the same way, we make two more balls, larger in size.
How do you get the ball out of thread ball? Very simple! Once the glue has dried, you just need to pierce the ball and pull it out through the threads.
Now the balls need to be connected to each other, slightly pushing through at the bonding points.
Let's decorate the head of our product - the eyes can be made from beads, the mouth from black thread or also from beads, and the nose - a carrot can be made from cotton wool and a toothpick. In such a simple way, it is quite possible to make a snowman with your own hands from improvised materials for the New Year 2019 quickly and beautifully!

Master class with visual video instruction

paper snowman

Well, again we have a snowman from usually A4 paper, which can be made quickly and easily.

Here is a list of materials that we may need:

white paper for quilling (long strips of the same length),
blue paper for hat and scarf,
black beads for eyes
red - for the nose.