The art of origami is a great way to keep your child busy and spend time together. One of the best and most useful hobbies for children. Making these crafts develops accuracy, attention and fine motor skills. Airplanes using the origami technique, made from paper, come in a wide variety: from the classic ones that everyone made in childhood, to the coolest fighters. The problem is that not all of them are good flying airplanes. You can consider several schemes of the simplest and fastest models. You will soon learn how to make a beautiful airplane out of paper using the origami technique.
Making an airplane from childhood using origami technique
Take paper of any color, A4 format.
Folds in half lengthwise.
It is straightened back and placed vertically. The corners are bent towards the middle.
Then the sides are folded inwards again, as shown in the photo.
Now it bends in half, lengthwise.
We need to spread our wings. Fold them over the sides.
It turns out an old familiar airplane, like this:
More difficult work using plain paper
The creators claim that he holds the record for longest flights. The paper format is the same, A4. The sheet is taken by the corner and bent into a triangle.
Then you need to straighten it back and, holding the other corner, bend it into a triangle too. Folds are needed, so you need to carefully iron the folds. It turns out like this:
Now you need to fold the future plane in half, lengthwise.
Unfold it back and fold it again, but across it.
The middle is folded upward and two new side lines are made for the fold.
Now the sides are bent, up to the fold line and again.
The sides are now vertical and you need to bend the nose towards them.
The plane neatly folds in half.
The wings bend down.
And the plane is ready!
Just don’t throw the airplane too hard, this will only make it fly worse.
We create a fighter plane using interesting designs
In the instructions for the airplane, the creators claim that it flies perfectly in open areas. He needs room to fly.
The paper format does not change, A4. The sheet is folded in half, lengthwise, then unfolded.
Now folds across.
The corners are bent inward and straightened again.
The side parts are folded again, but now up to the fold line.
A pencil is inserted into the side parts and moves them apart, making a pocket.
The sides are flattened and smoothed.
Fold in half, towards the edge. You will get a figure like this:
The movable top of the small triangles now bends inward.
The figure turns to reverse side and here the sidewalls also bend.
Bend diagonally towards the middle, as shown in the photo.
The sides of the resulting diamonds are folded under the figure.
It turns out to be a triangle that needs to be folded in half vertically.
The figure is placed down with the longer side and a line is drawn, approximately 2.5 cm from the edge of the fold. Like this.
The upper part of the triangle (wing) bends down exactly along the line.
It's the same on the other side.
The movable edge of the delta wing bends upward at a right angle.
Hello guys! In this material we will talk about how to make paper airplane for 100 meters flight . Generally speaking, almost any aircraft can fly quite far - it all depends on the altitude from which it was launched. Design Features paper airplanes affect their ability to plan. So an airplane that can glide for a long time will fly for a very long time and far from a height, for example, the 16th floor. The wind will additionally help speed up and prolong the flight of such a paper craft. Let's start our rating of the farthest flying aircraft.
5th place - the simplest paper airplane models
Everyone settled down at this place simple models airplanes that even a child can assemble and which we all assembled in class and let the girls and teachers see. For such tasks, ordinary blunt-nosed airplanes and gliders are quite suitable. Here are 10 of the best easy-to-assemble paper airplanes.
This is the simplest and most popular paper airplane - almost all people know it because they have been collecting it since childhood.
The following aircraft model has a fast and smooth flight. Due to the front supporting wings, the nose does not collapse, providing stabilization, lift and long flight.
The next one will be a blunt-nosed aircraft with increased collision resistance.
The fifth will be assembling a modified plane with a blunt nose. The circuit is simple, but requires careful assembly.
Now I propose to assemble a good airplane from paper with nose wings and vertical rear stabilizers. The shape of the wing of such a glider allows you to fly longer in a straight line.
The next plane has a sharp nose and flies rapidly forward. The fins on the wings stabilize and prolong the flight of such a paper fighter.
The following scheme has good piercing abilities - the craft turns out to be similar to space fighter. It seems that it was created to exterminate enemy personnel.
The largest wings are those of a glider, which has a rather ridiculous appearance. But this does not prevent him from flying very long and far.
The amazing design of this airplane makes it look like a space shuttle or a Boeing. He flies not far, but effectively.
4th place - paper plane "Albatross"
We bend a sheet of A4 paper in half and draw it with our fingernail so that the fold is perfect.
We bend the edges of the paper inward towards the central axis.
After this, we bend the edges at an obtuse angle again towards the center. The edges of the paper should lie symmetrically on the central axis of our craft.
Then we bend the nose of the paper airplane towards the tail and align the centers of symmetry.
Add corner folds so that the left side is parallel to the right side.
We bend it back and bend the sharp nose of the plane back along the flight path. We iron all the seams with our nails.
We bend the wings so that a large area of the wings remains load-bearing. We do everything extremely symmetrically so that the plane can fly further.
At the end we form the tail. In principle, the bend of the tail can be done as in the photo of any size.
We straighten the resulting bends upward so that it ends up in the space between the wings.
We bend the vertical stabilizers upward parallel to the main axis of symmetry of the paper airplane. This is the plane we have - try to fly it quickly.
If you still have any questions about assembling this aircraft, then take a look detailed video with comments.
3rd place - diagram of an airplane made from paper “Hawk”
Now we will assemble another complex aircraft.
First step. Fold the sheet in half exactly in the middle. The quality of the flight will depend on the evenness of the folds. All stages of the aircraft are done in a mirror manner - left and right.
Second step. Left and right side bend towards the center.
The third step is to once again take the left and right edges of the paper and bend them towards the central axis of the plane.
The fourth step is to bend the sharp end of the workpiece towards the tail. In this case, the bend line of the sheet should pass through the point of intersection of the edges in the middle of the paper craft. Centering is checked by matching the central bend along the long side of the sheet.
Fifth step. We bend the edges of the paper on the left and right again towards the center, as in the photo. It is important here that the inner layer of paper does not bend or form wrinkles.
Sixth step. We grab the outer fold and open it, and then wrap it inward as shown in the photo. We do the same from the other side of the plane. We take the formed pockets and bend them inside out.
Seventh step. The pointed nose needs to be bent in the opposite direction about 1 cm deeper than the logical fold line. Pockets are formed there, which we bend inside the nose from approximately the middle.
Step eight. We also wrap the tip opposite the sharp nose.
Ninth step. We bend the paper airplane wings parallel to the keel. If the wings of your paper craft match, then the base of the airplane is assembled symmetrically.
Tenth step. We bend the edges of the wings parallel to the main axis of symmetry to form flaps. The plane is ready.
A detailed video on how to assemble such an airplane with your own hands from paper is given below.
2nd place - diagram of an airplane made from paper “Thunderstorm”
We will continue to assemble a paper airplane that will fly for a long time according to a highly complex assembly scheme. We will need, as always, a sheet of A4 paper. This can be plain white or colored paper. You can also take sheets from magazines with medium paper thickness.
The first step is to bend the sheet in half. We remind you that depending on how smoothly and symmetrically your plane is assembled, it will fly in exactly the same way. After bending the sheet in half, unbend it and then move on to the second step.
The second step is to bend the corners to the center - on one side and the other. It turns out to be such a preparation.
Third step. The edges of the paper that formed an obtuse angle on the left are correctly bent again along the line of the nose of the aircraft to the right corners of the paper blank. See how it looks in the photo. Straighten the folds of the paper near the nose especially carefully so that everything is symmetrical.
Fourth step. We see a point at the intersection of the bends of the left and right edges of the workpiece. Along the line through this point you need to fold the airplane in half, as shown in the photo. You can check yourself by matching the lines of the central fold. After bending, unbend, turn over and bend in the opposite direction.
Fifth step. Turn the plane over again and fold the sides on the left and right towards the edge of the inner sheet. See photos and videos for more details.
After this, turn the plane over again and bend the nose forward again.
We turn it over again and turn the strip of folded paper towards the tail of the aircraft blank.
Sixth step. We bend the plane along the central longitudinal axis. It is convenient to bend the stabilizers on the wings in this position parallel to one and the other side.
Seventh step. We bend the wings to the base. Here you can bend it in different ways and experiment, but it is considered optimal to bend it from the nose to the fender liner.
Everything should fit together smoothly and be symmetrical. Then the paper plane will fly exactly 100 meters or more and not lean left or right.
If the plane is going to fly downwards, then you need to bend the back of the wings slightly upward. Thus, the flow of oncoming air will lower the tail of the aircraft and raise the nose up.
1st place - paper airplane diagram “Falcon”
This is probably one of the most beautiful paper airplanes that you can make with your own hands, because it is very similar to the real thing. To fold such a long-flying airplane with your own hands, follow detailed instructions with photos and video at the end.
1 – take a sheet of medium-weight A4 paper and fold the sheet in half to make a paper airplane.
2 - fold a sheet of paper in half for the longest-flying paper airplane.
3 - fold the paper along the edges to make a cool airplane with your own hands.
4 - we also bend the second side of an airplane made from a sheet of paper.
5 - iron the resulting corners of the paper airplane in half again.
class="eliadunit">
Paper airplanes easy to make, and most importantly, they really fly. This process is so interesting that any adult will be happy to make light paper structures and, to the delight of children, send them flying. Well, older children will be able to take up aircraft design themselves.
You can master making paper airplanes by studying the video tutorials we offer. Each of them contains step by step instructions with a video, and it’s impossible to make a mistake: you just need to carefully repeat the actions of the narrator so that in the end you have a real flying model in your hands.
In order to make a simple airplane that can fly far, up to 100 meters, you need:
- take a sheet of ordinary writing paper and fold it in half along the long side, which will give us the marking of the axis of the structure;
- Next, we unfold the sheet and apply its two corners to the center line;
- then bend the corners twice to the side of the resulting triangle;
- lay out the sheet and, using the resulting lines as markings, bend the corners towards the middle;
- We fold the sheet along the bends and open it again.
This completes the marking of the bend lines. Using the markings, we bend the corners, following the video instructions.
Video lesson:
To make a model aircraft resembling the famous F15 fighter, a sheet of paper is folded several times to create marking fold lines, after which you can begin making the model. The video tutorial explains in detail how to make a paper airplane; all you have to do is carefully follow the actions of the person demonstrating the manufacturing process.
The instructions are quite complex and require increased attention, otherwise the model will turn out sloppy or will not work at all. With the right steps, you will get a neat model that can be placed on the table using a leg made from a paper clip.
Video lesson:
This airplane model, made from a sheet of paper, is capable of flying long and far. To begin with, several bends of a sheet of paper are made, which will serve as markings for further actions, all bends must be done very carefully and carefully so that the airplane turns out strictly symmetrical and can fly confidently.
Some bends result in pockets that are turned inside out and laid out in a different plane. The aircraft has a strong fuselage and wide swept wings with high lift. The ends of the wings are bent upward; these bent elements ensure straight flight.
Video lesson:
This is a model of the beautiful F15 Strike Eagle aircraft. To make it, you will need a sheet of writing paper, which is folded several times in accordance with the narrator's instructions. All bends, including the smallest ones, must be done very accurately and carefully to ensure that the model turns out beautiful. The finished airplane can simply be placed on the table as a decoration, or you can send it flying - the wings are quite capable of lifting it into the air.
class="eliadunit">
This good paper airplane will appeal to everyone, both children and adults, because it is beautiful and can fly. These are its main advantages.
Video lesson:
A sheet of paper is folded transversely along the short side, then along the long side, the corners are bent to the center along the resulting fold lines, the ends are folded inward. Several more folds of the paper sheet are performed, which must be done with great care.
The airplane must be strictly symmetrical, then it can stay in the air well. All folds must be carefully ironed. The finished airplane has a swift appearance and good balance, allowing it to fly confidently.
Straightness of movement is ensured by bent rudders; there is a special protrusion at the bottom, which is convenient to hold the model before launching.
Video lesson:
This airplane model flies really well, and you can have competitions to see whose airplane can fly the farthest. The work begins with several folds of a paper sheet, as a result of which marking lines are formed. All further paper folds offer an easy way to create a paper airplane.
The airplane has two small triangular wings and a neat tail that ensures flight in a given direction. Getting the tail involves cutting off a certain part of the paper, and the finished model can be glued together so that its halves do not fall apart and the airplane stays confidently in flight.
Video lesson:
The master class talks about how to make airplanes from a sheet of paper that can fly long distances:
- the sheet is folded in half lengthwise;
- the tips of the sheet bend towards the middle;
- This is followed by another bend, giving the structure an arrow-shaped shape;
- Another longitudinal fold forms the wings, narrow but long.
The body of the airplane is pierced with a paper clip, which prevents the wings from falling apart. The resulting airplane is simpler than all other designs, but is capable of flying far and smoothly. The direction of flight can be adjusted by bending the tips of the wings slightly upward.
Video lesson:
It seems that every child and adult can master the technique of folding airplanes. The most simple ways passed from parent to child. But there are also more complex models for making paper flying figures, which are known to few. If you decide to expand your understanding of paper figures from childhood, you can see how to make airplanes out of paper, the diagrams are posted just below.
To fold the figures you do not need glue or additional materials. All you need to prepare is thick paper. If you have not yet encountered complex origami designs, then you should start with simple models.
Simple origami airplane model
- Take an A-4 sheet of paper and fold it in half.
- Fold the top corners of the resulting rectangle towards the center. Straighten the newly folded triangles and secure.
- Fold the obtuse corners of the resulting diamonds back.
- Fold the two side corners back, forming a regular triangle.
- Bend the workpiece and unscrew the wings.
- Bend the tips of the wings and insert them perpendicularly. You've got a fighter.
Paper fighters fly well, so you can launch your invention into the air.
To make it clear how each bend is made, you can use the video “origami airplanes made of paper”, which we attach to the article. You will be able to go through the process step by step with the master, comparing your work with his.
Using the origami technique you can create flying airplanes. A simple design can also rise into the air, but there are plans for more impressive designs that can take more than an hour to fold.
The coolest ones are those that glide smoothly over a fairly long distance. For example, this paper airplane, despite its simplicity, pleases with its movements in the air.
Model of a simple paper stunt airplane
- Fold the square first horizontally, then vertically. Expand the sheet.
- Fold the top towards the center.
- Fold in the top corners, but do not connect them in the center.
- Fold the corners back to form a triangle.
- Fold the top of the triangle. Bend the structure in half
- Fold the right angle inward (step 7).
- Unfold the wings.
These are instructions for folding a stunt plane. Launching such a craft into the air will bring pleasure to both children and adults. He makes intricate circles in the air and flies quite far.
Origami airplanes with good aerodynamics
In addition to airplane figures, there are also origami birds that are launched into the air.
- Fold the square sheet diagonally.
- Fold the resulting triangle in half.
- Open one triangle into a square and press.
- Turn the workpiece over and fold the corner into a diamond shape.
- Make bend lines for three corners of the rhombus: side and top.
- Peel the top layer and press.
- Turn the workpiece over and do the same on the reverse side.
- Fold the bottom corners of the diamond and connect them, tucking the tips of one into the pocket of the other.
- Move the upper triangles apart and secure. It is very important for children that the craft performs some kind of action. Therefore, the product must have wings to stay in the air.
- Fold the top layer of the bottom corner up. Bend the nose down, then back up.
- Turn the workpiece over and form a tail.
Such a swallow will be able to perform a relatively short flight. But you and your kids will be fascinated by playing with paper birds. Try to make a lot of swallows with your child and organize a large-scale flight to the south. The child will benefit from such an activity in many ways: development of finger motor skills, physical activity during the game and strengthening relationships with parents. After the game, the crafts you make can be hidden for next time or given as a gift to someone.
Educational video lessons to help beginners
In order to make a paper airplane, you will need a rectangular paper sheet, which can be either white or colored. If desired, you can use notebook, photocopier, newspaper or any other paper that is available.
It is better to choose the density of the base for the future aircraft closer to medium, so that it flies far and at the same time it is not too difficult to fold (on paper that is too thick, it is usually difficult to fix the folds and they turn out uneven).
Folding the simplest airplane figurine
It is better for beginning origami lovers to start with the simplest airplane model, familiar to everyone from childhood:
For those who were unable to fold the plane according to the instructions, here is a video master class:
If you got tired of this option back in school and you want to expand your paper airplane making skills, we’ll tell you how to step by step complete two simple variations of the previous model.
Long-haul aircraft
Step-by-step photo instructions
- Fold a rectangular sheet of paper in half along the larger side. We bend the two upper corners to the middle of the sheet. We turn the resulting corner “valley”, that is, towards ourselves.
- We bend the corners of the resulting rectangle towards the middle so that a small triangle looks out in the middle of the sheet.
- We bend the small triangle upward - it will fix the wings of the future aircraft.
- We fold the figure along the axis of symmetry, taking into account that the small triangle should remain outside.
- We bend the wings on both sides to the base.
- We set both wings of the plane at an angle of 90 degrees so that it can fly far.
- Thus, without spending a lot of time, we get a long-flying airplane!
Folding scheme
- Fold a rectangular paper sheet in half along its larger side.
- We bend the two upper corners to the middle of the sheet.
- We wrap the corners with a “valley” along the dotted line. In the origami technique, a “valley” is the process of bending a section of a sheet along a certain line in the “toward” direction.
- Fold the resulting figure along the axis of symmetry so that the corners are on the outside. Be sure to make sure that the contours of both halves of the future airplane coincide. How it will fly in the future depends on this.
- We bend the wings on both sides of the plane, as shown in the figure.
- Make sure the angle between the airplane's wing and its fuselage is 90 degrees.
- The result is such a fast airplane!
How to make an airplane fly far?
Do you want to learn how to properly launch a paper airplane that you just made with your own hands? Then carefully read the rules of its management:
If all the rules are followed, but the model still does not fly as you would like, try improving it as follows:
- If the plane constantly strives to soar upward, and then, making a dead loop, sharply goes down, crashing its nose into the ground, it needs an upgrade in the form of increasing the density (weight) of the nose. This can be done by bending your nose slightly paper model inward, as shown in the picture, or by attaching a paper clip to the bottom.
- If during flight the model does not fly straight as it should, but to the side, equip it with a rudder by bending part of the wing along the line shown in the figure.
- If an airplane goes into a tailspin, it urgently needs a tail. Armed with scissors, give it a quick and functional upgrade.
- But if the model falls on its side during testing, most likely the reason for the failure is the lack of stabilizers. To add them to the structure, just bend the wings of the aircraft along the edges along the dotted lines indicated.
We also bring to your attention video instructions for making and testing an interesting model of an aircraft that is capable of not only flying far, but also for an incredibly long time:
Now that you are confident in your abilities and have already gotten your hands on folding and launching simple airplanes, we offer instructions that will tell you how to make a paper airplane of a more complex model.
Stealth aircraft F-117 ("Nighthawk")
Bomb carrier
Execution diagram
- Take a rectangular piece of paper. Fold the upper part of the rectangle into a double triangle: to do this, bend the upper right corner of the rectangle so that its upper side coincides with the left side.
- Then, by analogy, we bend the left corner, aligning the top of the rectangle with its right side.
- Through the intersection point of the resulting lines, we make a fold, which ultimately should be parallel to the smaller side of the rectangle.
- Along this line, fold the resulting side triangles inward. You should get the figure shown in Figure 2. Draw a line in the middle of the sheet at the bottom, similar to Figure 1.
- We designate a line parallel to the base of the triangle.
- We turn the figure over to the reverse side and bend the corner towards ourselves. You should get the following paper design:
- Again we shift the figure to the other side and bend two corners up, after first bending the upper part in half.
- Turn the figure over and bend the corner up.
- We fold the left and right corners, circled in the figure, in accordance with picture 7. This scheme will allow you to achieve the correct bending of the corner.
- We bend the corner away from ourselves and fold the figure along the middle line.
- We bring the edges inward, again fold the figure in half, and then on itself.
- In the end, you will end up with a paper toy like this - a bomb carrier plane!
Bomber SU-35
Razorhawk fighter
Step-by-step execution scheme
- Take a piece of rectangular paper, bend it in half along the larger side and mark the middle.
- We bend two corners of the rectangle towards ourselves.
- Bend the corners of the figure along the dotted line.
- Fold the figure crosswise so that the acute angle is in the middle of the opposite side.
- We turn the resulting figure over to the reverse side and form two folds, as shown in the figure. It is very important that the folds are not folded towards the midline, but at a slight angle to it.
- We bend the resulting corner towards ourselves and at the same time turn forward the corner, which after all the manipulations will be on the back side of the layout. You should end up with a shape as shown in the picture below.
- We bend the figure in half away from ourselves.
- We lower the wings of the airplane along the dotted line.
- We bend the ends of the wings a little to obtain the so-called winglets. Then we straighten the wings so that they form a right angle with the fuselage.
The paper fighter is ready!
Gliding Hawk Fighter
Manufacturing instructions:
- Take a rectangular piece of paper and mark the middle by folding it in half along the larger side.
- We bend the two upper corners of the rectangle inward towards the middle.
- We turn the sheet over to the reverse side and fold the folds towards ourselves towards the center line. It is very important that the upper corners do not bend. You should get a figure like this.
- Fold the top of the square diagonally towards you.
- Fold the resulting figure in half.
- We outline the fold as shown in the figure.
- We fill the rectangular part of the fuselage of the future airplane inside.
- Bend the wings down along the dotted line at a right angle.
- It turned out like this paper airplane! It remains to see how it flies.
F-15 Eagle fighter
Airplane "Concorde"
Following the given photo and video instructions, you can make a paper airplane with your own hands in a few minutes, playing with which will be a pleasant and entertaining pastime for you and your children!
