Even if your toy fleet is full of various trucks, cars and military equipment bought and donated by adults, a do-it-yourself model of a fire truck will take the most important place in it. Not because this cardboard machine is so bright and beautiful, but because you made it yourself.

Car layout


Having such paper cars, you can organize real rallies around the apartment. You can build a garage for them. They are easy to paint with felt-tip pens and stick a toothpick flag into the cabin.

  1. Take a square piece of paper and fold it in half. Then unfold and fold inwards towards the middle of the edge of the paper.
  2. Fold the edges over again, but this time in the other direction and fold the sheet in half lengthwise.
  3. Make your own paper car outline by first folding the top corners and then tucking them in. Below, two corners will peek out from under the car. Fold them inward in the same way, marking the wheels of our car.
  4. Bend the bottom corners back, “rounding” the wheels a little. Place the corners in the back of the origami machine, and make “headlights” in the front.
  5. To do this, bend the corner with your own hands and then straighten it.
  6. You can draw headlights, handles, doors and the driver behind the wheel. So we made the first origami cars. 15 minutes and the car is ready.


We will need:

  • 5 cardboard tubes from toilet paper;
  • 2 spools of tape;
  • boxes of different sizes;
  • scotch;
  • glue;
  • acrylic paint or gouache;
  • paper napkins;
  • masking tape;
  • 4 cocktail straws;
  • matches;
  • newspaper.

Work order

  • Create the frame of a fire truck with your own hands. To do this, fold boxes of different sizes and glue them with tape. Try to make a design that resembles a vehicle with a cabin and a covered body.


  • Cut the tape spool in half and cut as shown in the photo. These will be the wings. You need to make 4 such blanks.


  • We make mock-ups of water tanks from toilet paper reels. To do this, we manually seal their ends with masking tape and connect them two at a time.


  • To secure the wings, cut the boxes with a knife in three places. Additionally, we glue them with tape. We attach the tanks to the sides, and on top of the cabin there are several layers of strips of corrugated cardboard - this is the future “flashing light”.


  • Now you need to make a model of real wheels with your own hands from toilet paper reels. Cut them into rings and cover one side with a circle of cardboard.


  • Fill the wheel with crumpled newspaper and cover the end with masking tape. Wrap the wheels with strips of corrugated cardboard.


  • To smooth out all the imperfections and irregularities, cover a homemade car made of cardboard. paper napkins. Make strips of cardboard and glue them around the windshield as a frame.


  • You need to make fire escapes from cocktail straws and matches and paint them silver. We make side mirrors from silver paper and matches. Paint the “flashing light” and glue on a cardboard bumper. Attach the headlights. You can use metal caps from beer bottles for them.


  • Our craft is almost ready. All that remains is to paint it with acrylic paints and place it on axles, which will be any two wooden sticks. Don't forget to attach a fire escape to the top.



In fact, the vehicles used by fire rescuers can have different shapes, as well as different purposes. For example, you can make an excellent model of a truck carrying fire hoses from an egg carton. This pressed cardboard machine will be stable and strong.

  • Cut the boxes with your own hands as shown in the photo.


  • Paint the layout with gouache or acrylic paint.


  • Cut a toilet paper roll in half and twist red and yellow tubes into halves.


  • Glue the parts together. For this machine, you need to make wheels from cardboard from plastic caps, placing them on wooden or metal axles. Place bobbins with sleeves in the body, glue on headlights made from beer caps and the craft is ready.


Mothers and grandmothers probably have a lot of multi-colored buttons accumulated in their boxes, which have nowhere to be used and would be a pity to throw away. But they can make an excellent picture. First draw the outline of the car on paper, and then fill it with colored buttons, carefully gluing one at a time. Place your homemade picture in a frame and give it to the owner of the buttons.


To make such a delicious cardboard machine, you will need 4 suitable sized boxes, ladders made of matches and tubes, cardboard, napkins and half a kilo chocolates in red candy wrappers.


Make a model of the car from cardboard as described in the first method. Install the ladder, paint it, and then stick candy on all sides. Instead of wheels, you can use chocolate marshmallows, and instead of headlights, colored jelly beans. It’s not a shame to give such a layout to a friend for his birthday.

Race car

In just an hour, you can easily fill the entire toy car park by making paper cars different forms and stamps.


In order to make a model of a paper racing car with your own hands, you need to take a standard A4 sheet.

  1. Fold the sheet in half lengthwise. Fold the corners inward on both sides, forming arrows.
  2. Fold the longitudinal sides towards the middle under the arrows.
  3. On one side, fold the arrow towards the middle, making it even sharper.
  4. Lift the other side and place it on top of the folded arrow, tucking it in between the layers of paper.
  5. Bend the tail of the car. You can draw headlights on it.
  6. To make it clearer how to make a paper machine, you can give another drawing diagram.


Many people know that many types of crafts can be made from cardboard. In childhood, probably, any person with imagination and the desire to make something with his own hands made something from such accessible material. Few people know, but there are people who have not given up this childhood hobby and make truly amazing things out of cardboard.

Today we will tell you how to make a car out of cardboard.

    Show all

    Beautiful car

    It will surely delight your baby.

    So what we need:

    • At least two pieces of cardboard boxes;
    • Colored paper;
    • Scissors;
    • Compass;
    • Colored pencil or felt-tip pen;
    • Copper wire;
    • Pliers;
    • Glue.

    Cut off the walls of the boxes and draw circles on them, these will be the wheels for our future car. Then cut them out using scissors.

    Having attached the circles to the base of the second box, trace with a pencil the places where the wheels will be located.

    Using an awl or scissors, make holes on the sides where the center of the wheels will be located.

    Cut pieces of the prepared wire as long as the width of the future car. This will be the basis for the wheel axles.

    Using glue, attach the wheels to the pieces of wire threaded through the holes. If you want the wheels of the car to eventually spin, use pliers to pinch the ends of the wire on both sides in the form of loops.

    Then we'll start making the car look beautiful. To do this, use a pencil to draw and color windows and doors, then cut them out with scissors. Or they can be cut out of self-adhesive paper suitable color. If you have time and patience, you can make the doors open.

    In the same way, you can create a cardboard trailer for her, it will be more fun. You can attach it again with a piece of wire.

    By the way, if you get inspired, you can make a few more trailers, then you’ll get a whole road train.

    You will need the following materials for this craft:

    • Sheet of cardboard.
    • Paint, brush for coloring.
    • Glue or stapler.
    • Scissors.
    • Unnecessary and outdated old toys to decorate your car.
    • Seven round cardboard tubes that are left over from toilet paper.

    You paint paper cardboard tubes in different colors in any way - with a brush or using a piece of cotton wool. Then you cut out circles from cardboard, they will serve as cylinders for the car and paint them.

    You glue these wheels to the sides of the car using glue or a stapler.

    And now we will tell you how to make a car out of cardboard using modern computer technology.

    Racing car

    You will need:

    • Paper
    • Printer
    • Scissors

    This type of craft is easy to make; you just need to print it, carefully cut it out and glue it along the drawn contours. You can find any number of such blanks on the Internet; an example of one of these is shown in the figure below.

    How to make a car out of large cardboard?

    Tape all parts of the box together.

    On both sides, draw doors symmetrically on both sides and cut them out using a sharp knife with a thin blade.

    Draw and cut out the windshield in the same way.

    Using tape, secure the bent parts of the ends with an inward bend, now using the same tape to secure the windshield.

    If there are any extra pieces left at the corners, trim them off with a knife or scissors.

    Using the bottom of paper cups, you make wheels for your future car. If you don’t have them on hand, you can simply use round pieces of cardboard of the desired color and size.

    Now color your creation and admire it!

    The simplest and nicest machine

    Shape a piece of paper into a square. For those who don’t know, this is done like this: bend the sheet diagonally and cut off the pieces that protrude beyond the edges. Trim off the excess with scissors.

    Bend the square into two halves, then two more times lengthwise and crosswise. This will show you the fold lines. Now you can expand the sheet.

    Wrap its lower ends to the very top of the middle. Then bend the lower parts of the bent corners on both sides to make wheels.

    Fold everything that comes out in the end in half along the line that is located along the central fold. Bend the lower part up and bend the upper right corner.

    Draw the headlights and other details on the product, paint it in any colors. We hope this simple craft will delight your child.

    Car for girls

    Few parents realize or understand that not only boys, but also girls can play with cars. Below we will tell you how to make a car to carry your favorite dolls in it. I think your daughter will really like this craft.

    So, what you will need to have on hand:

    • One cardboard shoe box;
    • Thick cardboard;
    • Thin paper of different colors;
    • Glue;
    • Double-sided tape;
    • Long wooden sticks in the shape of toothpicks;
    • A small piece of transparent plastic;
    • Any objects that resemble headlights.

    To begin, draw on paper a template of doors that would fit the size of the toy. The usual length of the legs, for example, of a Barbie doll, which girls love so much, is eighteen centimeters.

    Cut the workpiece on both sides and bend the ends of the resulting template inward. We will attach the seats to these ends.

    Then make cuts with a sharp knife where the car seats will be.

    Now cut out even circles from colored and thick cardboard, four pieces each. These will be the wheels.

    Using a needle or awl, make through holes in the center of these circles and then make more of them.

    Cut out the hood and trunk from thick cardboard according to the size of the shoe box.

    In turn, glue each prepared part to the car, then make holes in the box for the wheels.

    Use colored paper to cover the car, then make a windshield using transparent plastic.

Creating crafts for parents and children gives excellent results: there is an active development of abstract thinking, finger motor skills, creative skills and, of course, imagination.

Every boy will be interested to know how to make simple craft in the form of a cardboard car for children. Therefore, the task of caring parents is to suggest the right direction for the creative process, purchase the necessary materials and stock up on a wonderful mood for exciting game with your kids with cars.

Racing cars

Cars made of paper and cardboard occupy a special place among crafts for kids. Entertaining little ones every day with toys from the store is quite an expensive pleasure. In addition, the child quickly gets bored with the same toys. Therefore, we suggest taking advantage of the master class without unwanted financial investments.

You will need toilet paper rolls, which should be covered with multi-colored paper. As soon as the adhesive composition has dried, it is necessary to make a rectangular cutout on the rolls, without cutting to the end on one of the sides, and by bending the paper, it will be like a driver’s seat.


You can color the inside of this seat using a marker. Using snow-white cardboard, you need to cut out a circle and stick it on the side opposite from the seat - this is the steering wheel, which should also be painted.

Decorate your car with applications made from a contrasting shade of paper. Glue the wheels with bolts or lids from plastic containers.

Now you know how to create a racing car out of cardboard, thanks to the car-themed craft workshop discussed above.

Fire trucks

To create such a craft, you will need matchboxes and colorful paper. Four boxes should be glued together. The created structure must be covered with red paper. Another matchbox must also be pasted over and then glued at the top of the turret.

Using plasticine, you should create a flashing light, a mount for a ladder formed from pre-glued matches. Next, you need to add windows to the car, as well as headlights, using yellow paper.


Origami machine

Fans of Japanese art will appreciate beautiful crafts on the theme of origami cars made of cardboard. This technique was invented when cars did not exist. But progress is constantly moving forward, and now many schemes for folding origami products have been proposed. These include three-dimensional options, schematic figures, and a fairly accurate model.

Let's take a closer look at the instructions for making a Volkswagen car with your own hands. For these purposes, watch the video on the resource called origami car.

Thus, the scheme providing for the assembly of such a car is considered the personal development of Esseltine, who gave it to those who like the art of origami.

It is important to understand that the expected result when creating three-dimensional origami products can be obtained by using a special paper sheet for such crafts. It has the required rigidity for ease of manufacture and creation of folds, while the finished car will perfectly hold its given shape.

Convertible made of cardboard

You can make an original convertible, as in the photo of car crafts, yourself using triangular modules. Folding should begin from the hood. Its width should reach eight modules; we are gradually moving on to glass production.


In order for the paper structure to withstand many modules, as well as thin elements, we use an adhesive substance, and instead of the bottom we use cardboard paper, to which the parts are glued. This trick will enable the product to acquire maximum strength.

Papercraft kits

If you are wondering what kind of car can be made for kindergarten, then papercraft kits will help you. They are templates for cutting out parts, which subsequently, through bending and gluing paper parts, are transformed into machines of extraordinary beauty, reminiscent of a real car.

Similar models can be used to decorate a toy track drawn on thick paper. In this version, it will completely resemble the real one, since various cars will ride on it, so much like the large prototypes.

We create paper car diagrams

Do you want to collect Papercraft children's cars, but there is no way to purchase ready-made templates? Then Runet can help! Here you will find countless recommendations on how to create cars from cardboard, diagrams that help you create and cut out the model you like.

The series offered on the pages of magazines include a variety of service vehicles, without which it is impossible to imagine exciting children's games: tractor, ambulance, excavator, dump truck and many others. Retro car collectors will be delighted different options 20s. It was during these times that a car was considered a great luxury

For competent and quick assembly, the minimum required is to cut out automotive elements from the cardboard on which the drawing will be printed.


Please pay special attention on unpainted elements, that is, snow-white areas are areas for gluing. It is on their surface that you should apply a small amount of glue when you bend them, and also attach the elements.

Choose the simplest white glue, as it will not leave any marks on the product, but will firmly hold the attached elements.

It is unknown, but it is likely that your child’s hobby of collecting paper cars will become the most interesting and entertaining hobby for many years, will provide a unique opportunity to fully understand the nuances of mechanics, and will help them fully learn to understand how a real machine works.

It is possible that if parents support their children’s passion for cars, it is possible that they will take an active part in choosing suitable profession your baby.

Photos of car crafts

All boys love to play with cars, but not everyone can make them themselves. Therefore, it will be useful to learn how to make a paper machine with your own hands. This is exciting This activity will help develop your thinking and your baby’s perseverance. Materials for crafts are always at your fingertips.

Making a three-dimensional paper toy

To make a 3D car you will need:

Making a car with your own hands is very simple. For this no special skills required, you must adhere to the following instructions:

There are two options for cars for 3D crafts: multi-colored and those that need to be decorated.

Making a fire truck

The fire truck is loved by many children, but finding it on store shelves is not easy. To make it yourself, you will need the above materials, patience and accuracy.

The principle of operation is the same as with volumetric machines, so there is nothing new here. But there will still be a hint. Try to bend contours with a blunt object, it's easier that way. It is better to use cardboard for drawing. When everything is glued, you can proceed to the stairs. Top class if the stairs can be raised and extended.

Paper crafts from scrap materials

With age, every boy wants to improve his cars. It becomes too easy to apply patterns for it. So we can start to crafts from scrap materials. You will have to wait until the age of 3, since these materials can be dangerous for the baby.

All boys love racing, which means they will definitely love racing cars. The means at hand for making them can be found in every home: matchboxes, colored paper, cardboard, small wooden sticks.

First, roll up a cylinder or take the one left over from a toilet paper roll, cover it with something colored and cut a hole in the middle. It will be driver's cabin. We cut out four wheels from black cardboard and glue white circles in the form of disks in the middle of each. The child will be happy to color the resulting design as he likes.

The best way to make a truck is from a matchbox. To do this, take the outer part and cut it in half. Place one half horizontally, and place the second half vertically close to the first. The inner part must be pushed into the horizontal half . This is how we get the trunk. We cut out seven wheels, attach four to the trunk, and two to the body. We attach the fifth wheel to the rear of the trunk. This will be the spare tire. We finish drawing the little things: wipers, shiny glass, door handles and wheel bolts.

Origami car

A more complex option is an origami machine made of paper. No other available materials are required. There is no need for gluing either, since the strength of the modules will be high. But assembling the car itself will have to work hard. Module can be done in different ways , but they are all attached the same way. To clearly see how the module is made, take a look at the figure.

Development diagrams, patterns, templates

Paper crafts are useful for children. And the more your baby makes something with his own hands, the further he develops. Of course, modern boys choose a simpler method - toy cars or ready-made racing cars, police and military vehicles.

Many are simply uninteresting paper models, because they “don’t know how” to drive. This raises the question - how to make a car out of paper that drives? It’s quite easy to use lids from cardboard wheels instead of cardboard wheels. plastic bottles. And pairs of wheels can be connected to each other using wires or lollipop sticks.

Several designs or templates for toy paper machines.

Attention, TODAY only!

Every boy loves to play with cars; he will not soon assemble a metal structure on his own, but teaching a child to make paper models is very easy. Parents will need a little time, paper, glue and scissors. You can create such machines using the origami technique or 3D design, for each method there are necessary materials, instructions and recommendations.

How to make a car from waste material?

The older the boy gets, the more interested he will be in complex models, including those made from paper. Parents can only suggest which creativity is more exciting, provide the necessary materials and good mood to complete the task. For boys, among all the models, it is cars that enjoy great prestige, and buying different designs every day will cost parents a pretty penny. After a while, the child will lose all interest in these beautiful cars, so it is more interesting and useful to make the design yourself. It does not require large financial expenses, all you need is desire and time.

You can create cars not only using ready-made schemes, but also using improvised means, for example, cardboard and matches, wooden sticks and colored paper. For example, take several cardboard cylinders left over from toilet paper and cover each one with colored paper. After the fake has dried, it is necessary to cut a rectangular hole on the surface of the cylinder, leaving a little space on one side so that it can be bent and thus make a seat for the driver.

The structure can also be decorated inside using felt-tip pens or a marker; to create a steering wheel, you should cut a circle out of white paper and glue it in front of the seat. The machine can be additionally decorated with applications made of colored paper, choosing different shades. If the car is a racing car, you can put a number on it if ambulance or fire model, then you can also cut out the corresponding signs or draw them. To secure the wheels, use small bolts or plastic bottle caps.

Volumetric 3D paper cars

To complete the work, you need to prepare a printer, a sheet of paper, scissors, cardboard material, as well as glue, colored pencils, paints or felt-tip pens.

The instructions are very simple; you can assemble a paper machine without any special skills or knowledge. First, you need to print out a model of the machine you like on paper, then glue the sheet onto cardboard to make the structure durable. The image is cut out along the contour; this is another advantage of this technique of creating a paper machine.

Important ! All the lines are already marked on the sheet, so it will be easy for the child to fold the model, just bend it along the contour and hide the remaining wings of the workpiece inside.

These white ends must be glued together so that the structure does not fall apart, and if the cardboard is strong enough, then you can use super glue rather than stationery PVA. After that, the most interesting thing for the boy is to decorate the car at his discretion.






















A simple way to create a paper car

It’s just as fun to play with paper cars as with metal or plastic ones, you can arrange real races, and you can also build a garage by decorating all the structures with felt-tip pens, and use a toothpick to make a flag.

To create a paper machine you will need a square piece of paper; it should be folded in half, then the edges should be unfolded and reverse side bend them towards the middle of the sheet. Then, fold the edges again in the opposite direction and fold the sheet of paper in half. Draw the outline of the car onto the material, to do this, fold the top corners, then tuck them inward, two corners will peek out from below. They are also folded inside, after which you need to make wheels for the car.

Bend the lower corners back, rounding them a little, thus creating wheels; in front, to make headlights, the corners must be laid inward. Do the same on the back side of the car; all the details of the vehicle can be drawn, for example, wheels, headlights, doors or the driver behind the wheel. 15 minutes of time and a beautiful paper car is ready.

Origami machine

This is a unique art that involves the creation of unusual paper figures, including cars. To work, you just need to stock up on colored paper and patience, it’s very easy, so you not only can, but also need to involve children, together you can create a whole fleet of cars. Or you can make a car out of a banknote and give it as a gift to a friend.

To create, for example, sports car, you need to take a rectangular sheet, as a rule, the aspect ratio should be 1:7. The work begins by bending the upper right and left corners, thus creating all the necessary folds. The next step is to fold the top of the sheet, along with the folded corners on the left and right. Small triangles will remain sticking out, which should also be folded towards the middle of the sheet of paper.

Next, you need to fold the sides of the leaf, fold the bottom part, follow the same algorithm that was performed when folding the top part of the paper. All that remains is to fold the structure in half, tuck in the triangles that are peeking out and that’s it, the machine is ready.