Competent management of sales and the production process, cash accounting are the keys to success in the activities of any commercial company. An integrated approach to solving these problems will increase the company's competitiveness and make business more efficient.

Efficiency is primarily assessed as the degree to which a goal is achieved in relation to the resource expended. Spent a ruble and get two in annual terms - this is effective; spend five and get zero - this is ineffective. To see and calculate the feasibility of one or another action is the task of the management of a furniture factory. It is quite simple to evaluate, say, the introduction of new equipment with greater productivity, however, the effect of the introduction of accounting and planning systems can be much, much greater.

Control systems have certain functionality, each block serves a specific purpose:

The automated “Purchasing” workstation allows you to organize work on supply, generating applications for suppliers - this is good, but it is effective when the program can select a supplier, determining whose price is more favorable. Thus, you save your budget and increase the profitability of the enterprise, and the funds invested in the software solution pay off.

The functionality for planning a production schedule, if it exists, is good, but it is effective when it is not labor-intensive and obtaining a new production plan due to changed conditions is not difficult. As a result, you always have realistic information about the state of affairs, and most importantly, you have clear forecasts about what will happen tomorrow and the day after tomorrow - in such a situation, risks are minimized and costs are reduced through proper planning.

Furniture production accounting ERP is a solution that combines options for recording business activities and planning them. Competitiveness is unthinkable without competent management of enterprise resources, which, in turn, in modern conditions is impossible without the appropriate tool.

Program functions:

  1. -management of the materials procurement and sales process;
  2. - work with warehouse stocks;
  3. - preparation, planning and management of the production process;
  4. - HR activities, payroll calculation.


The program provides automation of furniture production and is a convenient tool for management that monitors and studies the work of personnel and the activities of the company as a whole.

It makes it possible to distinguish between various functions and deny access to certain data to individual employees, to increase the efficiency of obtaining information for making competent management decisions. Duplication of documentation will be eliminated, which will reduce labor costs when processing incoming information.

The program takes into account the specific features of the manufacture and sales of cabinet furniture and makes it possible to simplify the control and management of the organization.

The solution is developed on the basis of the 1C platform: the program is easy to use and learn, the technical support service is always ready to answer any questions you may have.

Thus, this solution will ensure effective furniture production management with minimal effort.

Archival material


Furniture factory "Ronikon" (Moscow), created in2000, initially engaged in the production of custom-made wardrobes. Currently, the factory has significantly expanded production and today, along with custom-made furniture, offers a large assortment of serial cabinet furniture - sliding wardrobes, hinged wardrobes, hallways, bedrooms, libraries, shelving, etc. The factory's products are sold through a developed network branded stores and branches located in large cities of Russia - St. Petersburg, Nizhny Novgorod, Samara, Volgograd, Krasnoyarsk, Novosibirsk, Krasnodar, Tula, etc. The company employs more than 2,000 people.

Need for automation

The growth of production, combined with the development of a network of branches, led to the use of an effective production management system and numerous divisions. The information system that existed at the enterprise at that time consisted of approximately ten separate software products. Over time, it became clear that this system did not allow for a quick and objective response to the processes taking place in the company, and also did not cope with reflecting all the changes associated with business expansion.

Data exchange between departments was not organized effectively. Units received information untimely, and this made it difficult to analyze the existing situation. It took so much time to collect the necessary data that much of it became irrelevant during the collection process. It was difficult for management to track the stages of fulfillment of certain orders; work centers and personnel were unevenly loaded.

To organize full control over the production process and effective cost planning, as well as to solve other problems, the enterprise needed a modern information system.

The factory management presented a number of requirements for the new automated system. First of all, its functionality should have allowed the automation of enterprise business processes, taking into account industry specifics. To support the growth and development of the enterprise, the information system had to be scalable. It was also necessary for the system to promptly display all changes in Russian legislation.

Work on the design and implementation of the information system was entrusted to the company "Aviant" (1C: Franchisee, Moscow), which, according to customer reviews, has the necessary experience in automating production and trading companies.

The new information system for the furniture factory was created on the basis of the standard application solution “1C:Manufacturing Enterprise Management 8” on the “1C:Enterprise 8” platform. This software product, in the opinion of the factory management, best met the stated requirements for an automated system.

Project work

At the preparatory stage, Aviant specialists carried out a comprehensive diagnosis and analysis of business processes, on the basis of which a scheme for their optimization was then drawn up. In twenty days, a prototype of the system was created and fully implemented, and a test example was implemented using customer data. All business processes of the furniture factory were regulated and subject to automation within the framework of this project.

The implementation took place in several stages. First of all, the full production cycle of furniture products was automated, starting from taking measurements and designing the appearance and ending with installation of the finished product at the buyer. To give the production process the necessary transparency, it was divided into a sequence of stages in the system that are easily tracked. Accounting for direct and indirect costs in the manufacture of products was also set up. Thanks to this, it became possible to accurately calculate the final cost of production, which made it possible to formulate a flexible pricing policy.

At the second stage, the work of the materials warehouse, procurement service, administration, planning and economic department and design and technology bureau was automated. Decision making and interaction between departments have become more efficient and consistent. The factory now has the opportunity to plan production based on sales plans. In addition, the system implemented the possibility of dispatch, which made it possible to ensure uniform loading of all parts of the furniture factory, as well as continuous, rhythmic and economical execution of all processes of the production cycle. This helped prevent equipment downtime and lost working time and, accordingly, fulfill orders on time.

At the third stage, a number of specific mechanisms were implemented in the system. This is, for example, the “Service Management” subsystem, designed to account for and control the provision of services for measurement, development of a product design project, delivery and installation finished product. There is also the ability to control funds and use them optimally with customizable routing of tasks by role.

In addition, the system implements a special “Technologist Monitor” tool. For each customer order, the monitor displays data on the needs for materials necessary for its execution, and also automatically controls the availability of the required raw materials in the warehouse. As a result of using the Technologist Monitor, the accuracy of calculations has significantly increased and the coordination of costs has been simplified, optimal workload of work centers and personnel has been ensured, and control over all stages of order fulfillment has been implemented in real time.

Thanks to the creation of special cutting cards, which display the remaining materials and offer optimal options for their use, there has been a reduction in waste in the production of products.

Automation result

As a result of the project, 200 jobs were automated at the factory. The new information system covers main and auxiliary business processes and is effectively used to solve problems of comprehensive planning, analysis and control of activities. Automation has led to a reduction in the number of routine operations and increased efficiency in record keeping. Management received a fully functional management tool that allows them to quickly make decisions based on detailed and up-to-date information.

The implementation of the system contributed to a significant reduction in management costs and expansion of the range of products produced by the Ronikon furniture factory. Combined with a more flexible pricing policy, this led to an increase in demand for products and, accordingly, to an increase in the company's profits.

Currently, having gone through the stages of industrial launch and warranty support, all divisions of the Ronikon furniture factory are engaged in operational activities in the new information system.

1C-Rarus is a joint venture between 1C and Rarus, which has existed for seven years and is one of the leading companies in the development of ready-made industry solutions in the field of business automation on the 1C:Enterprise platform. Today the 1C-Rarus company presents a new solution for the effective management of a modern furniture enterprise.

Without exaggeration, we can say that modern computer technologies have taken important place in the field of production. Indeed, more and more manufacturers are coming to the conclusion that automation can significantly improve the efficiency and effectiveness of the enterprise.

However, most software products on the market for manufacturing enterprises, as a rule, solve either local problems: accounting, trade, warehouse operations, or do not have a clearly defined industry specialization. This problem is also relevant for furniture companies.

In November 2001, at the international exhibition Furniture 2001, the 1C-Rarus company presented a software product that comprehensively implemented the production, trading, warehouse and financial functions of a typical furniture enterprise. At the same time, the program is designed in such a way that it is convenient to work with geographically remote divisions of the enterprise.

This solution is intended for maintaining management accounting in production, both standard furniture and furniture manufactured to individual orders. The program can also be useful for furniture showrooms.

Below is brief description main functions of the program:

Order and sales management

For a consumer-oriented furniture company, an important element of management accounting is the management of customer orders.

To work with clients, the program provides an unlimited number of price categories and pricing mechanisms that the user can use at his own discretion. When placing an order, you can specify both regular information about the order (contents, customer name, address) and additional information, for example, delivery time. When creating an order, you can include both products from the catalog and “create” products based on a prototype (one of the products already present in the catalog).

A useful feature when working with customers is the entry and storage of product photos. Thanks to this, the program can be conveniently used in sales departments or furniture showrooms, selecting the furniture the buyer needs by color, size, appearance, material and coating.

Upon receipt of an order for the shipment of furniture, you can receive a prompt calculation of the cost of the order, taking into account deviations from the prototype and additional services for the delivery of furniture, its assembly, etc.

For the convenience of working with orders, the program allows you to keep track of the geometric parameters of the item, for example: height, width, length, type of facade.

The program allows you to trace the entire chain of documents created based on the entered customer order. By drawing up an operational report on balances and turnover for a specific order, you can find out the status of order fulfillment at any time.

Materials management

A distinctive feature of furniture production is the presence of a large range of materials, raw materials, semi-finished products, finished products, goods. Each element of the nomenclature has various properties: weight, dimensions, material, color, coating, etc. This and other data is stored by the program in the multi-level “Nomenclature” directory.

In connection with the “Nomenclature” directory, you can enter an arbitrary number of product specifications and semi-finished products indicating the main specification. The specification stores data on the material composition of the manufactured product, production operations for its manufacture, by-products, analogues of materials and semi-finished products with a replacement priority scheme.

The program assumes full automation of warehouse accounting and movement of material assets: receipt to warehouses, movement between warehouses and to production, write-off, batch accounting, inventory taking, reserving goods in the warehouse, etc.

Production management

Based on orders received from customers and other system parameters, the program generates a furniture production plan. Planning is carried out for a certain period for specific projects (types of activity, groups of orders), in the context of divisions and product range.

Based on the furniture production plan, the planned cost of production is calculated, a procurement plan for raw materials and materials is drawn up, production tasks and orders are formed by suppliers.

Entering a production task for final products automatically generates tasks for workshops, areas, employees for processing raw materials, assembling components, cutting into materials and other operations necessary for the production of furniture.

Production accounting in the program is carried out by the formation of primary documentation: production tasks and work orders, invoices, documents for production, etc.

The capabilities of production accounting are complemented by technological maps, which store data on the composition of the manufactured product or semi-finished product (staples, nails, boards, upholstery), consumption rates of materials and semi-finished products, production operations, by-products and analogues of materials and semi-finished products that are used in the production of the product.

Cost management

The program allows you to keep records for different types production Accounting for the cost of manufactured furniture is possible both by actual and standard costs. In this case, standard costs are indicated directly in the technological maps.

The cost of direct costs can be calculated directly at the time of production or at the close of the period. General and production costs are written off in accordance with the selected method when closing the period, and various cost distribution bases can be used. Records of work in progress are also kept by divisions, orders, production assignments and items. The program supports accounting for defects and returns from production.

Management of mutual settlements and funds

The program allows you to automate work with clients: issuing invoices, invoices, invoices and other primary documents. To record purchases of raw materials, materials and goods from suppliers, registration of receipt of goods at warehouses, returns of goods to the supplier, registration of invoices and entry of orders to suppliers is provided. At any time, you can get details of mutual settlements with counterparties by currency, by agreement, and by supporting documents.

The program allows you to generate and process primary banking and cash documents: payment orders, bank statements and cash orders. Conducting bank and cash desk operations allows you to quickly monitor the movement of funds of the enterprise.

Management reporting

The program has extensive capabilities for obtaining a variety of management reports, allowing managers of a furniture company to have up-to-date management information at their disposal at any time. For example, you can generate reports on what is happening in production, on the balances of funds and materials, the status of mutual settlements with counterparties, the volume of production, the execution of the production plan, the volume of work in progress and defects, the volume of sales and purchases, the cost of production, changes in assets and liabilities of the enterprise, etc. Such reports can be detailed by company divisions, firms, and other analytical elements.

Compatibility

Automatic uploading of data into the standard “Accounting” configuration of the 1C:Enterprise program allows for integration of the 1C-Rarus: Furniture Enterprise program with accounting. This is very convenient, since the 1C company constantly keeps up to date the compliance of the Accounting configuration with the requirements and changes of Russian legislation.

The functionality of the 1C-Rarus: Furniture Enterprise program can be expanded with other management solutions of the 1C-Rarus company:

There is also a connection between the solution and the furniture design program “K3-Furniture”.

Thus, the “1C-Rarus: Furniture Enterprise” program has full capabilities for organizing management accounting, is flexibly configured and scalable, has pronounced industry specifics and covers almost all production and commercial functions of a furniture industry enterprise with the accounting process. More detailed information on this decision can be obtained by calling: 250-6383/93.

In order to conduct all business in the furniture business efficiently and optimized, it is recommended to switch to an automated control system. Its implementation makes it possible to increase management performance by 25%. Furniture concerns working with the 1c automated furniture production control system have achieved considerable success over the past 10 years.

What services does the company offer?

  1. A control system for kitchen and facade enterprises is designed to coordinate non-standard parameters, because it includes a large number of product characteristics.

    Problem: the ability to renegotiate order terms several times and the presence of incorrect characteristics, which leads to increased costs and time to complete orders.

    Solution: program for furniture production created to facilitate the production process, which estimates how much materials, financial resources and other operations will be required, and will also allow you to quickly carry out orders and make the necessary adjustments.

  2. A control system for cabinet furniture was created to unify production materials, as well as for the rapid exchange of information regarding the warehouse assortment.

    Problem: the need to ensure quick order fulfillment, as well as the work is complicated by standardized packaging of materials, which leads to confusion in the warehouse.

    Solution: furniture production program 1c: http://umf-consult.ru, UMF Consult company, analyzes the cost of products and allows you to reduce the number of errors by barcoding.

  3. The control system for sliding systems is designed to carry out both individual and standard orders, which entails complex calculations and constant approvals.

    Problem: the need to produce serial models simultaneously with individual orders.

    Solution: Furniture production accounting program allows you to create custom work and quickly exchange information with the client and the factory using remote access to the database. In this case, the system automatically calculates the final cost of the product based on the specified parameters.

  4. The control system for upholstered furniture is designed to take into account the specific features of production, that is, to ensure the correct functioning of the serial production of frame products and individual additions, such as upholstery and covers.

    Problem: the need not only to combine individual and serial orders, but also to take into account the specifics of the work, because this business often uses manual labor.

    Solution: Automation of furniture production allows you to parameterize orders, which greatly facilitates your work.

  5. The individual project management system allows you to complete unique orders on time.

    Problem: the need to clearly assess the feasibility of orders, this means that it must not only fully pay for itself, but also make a profit. This is due to problems in setting prices for the entire range of work, as well as problems associated with the salaries of workers.

  6. A control system for solid wood furniture allows you to track all stages of serial production of furniture, which helps fill warehouses.

    Problem: it is necessary to constantly calculate the cost profitability and take into account a large number of “reprocessing processes”.

    Solution: furniture production accounting allows for detailed, operational accounting of all orders, as well as the use of barcoding, which allows you to track all stages of production.

  7. Control system for custom cabinet furniture - designed to maximize the efficiency of order processing while minimizing costs.

    Problem: constant monitoring of production, speed and quality of order fulfillment is required.

    Solution: using a control system, you can automate order acceptance, execution and shipment using parametric and graphical system parameters and barcoding, which will notify you when the order is ready.

To ensure order fulfillment is clear and smooth, an automated control system with a barcoding system and accounting for many parameters will allow:

  • Effectively monitor the correctness of orders
  • make timely adjustments and exchange information
  • find out exactly when your order is ready

Country support:
Operating system: Windows
Family: Universal Accounting System
Purpose: Business automation

In other languages:

Main features of the program:

    You can make any product using any materials or semi-finished products

    For each product, you can create a cost estimate so that the program automatically calculates the amount of required raw materials

    It is possible to see the cost of each product produced

    The supply department can receive raw materials, transfer them to the production department and write them off

    The program can work with any number of warehouses and departments

    You will have a single customer database with all the necessary contact information

    All orders will be stored in a database, based on their quantity it will be possible to plan production volumes

    Orders can be arranged according to routes, which will be printed out to drivers

    Every day you can receive manufactured products to the finished goods warehouse, comparing the planned consumption of raw materials with the actual

    You can attach any files to each order, for example, with an order layout

    Each service can be divided into specific works and stages and can be easily controlled

    You will be able to track the execution of work by your employees and monitor their effectiveness

    All departments will interact with each other as a single successful mechanism

    The program can show, based on average production indicators, how many days of continuous operation the raw materials in stock will last

    You will be able to keep full financial records: post income, any expenses, see profits and view various analytical reports

    Conclusion
    to the screen

    Payment
    terminals

    Filling
    documents

    Copy

    Application
    for employees

    Application
    for clients

    You can quickly enter the initial data necessary for the program to work. This is done using convenient manual data entry or import.

    The program interface is so easy that even a child can quickly figure it out.


Language of the basic version of the program: RUSSIAN

You can also order an international version of the program, into which you can enter information in ANY LANGUAGE of the world. You can even easily translate the interface yourself, since all the names will be placed in a separate text file.


In our time of new technologies, managing furniture production is a technologically complex, but feasible task, which can be solved with the help of various accounting and control programs. Let's figure out what the furniture industry is, using the example of one factory. And will organizing furniture production management help you achieve big profits and not “go into the red,” for example?

What is necessary for the production of furniture and management of the company in the first place? Of course, this is the supply of raw materials. Without proper supply of materials and components to the factory, any enterprise will lose profits and incur losses. After all human factor sometimes it can play a cruel joke. Something was not delivered on time, something was not delivered, calculations were made incorrectly according to purchase documents - all this stops any production, be it a dairy plant or a plastic production organization. What happens when organizing furniture production management? To begin with, the furniture plant, based on known order data, evaluates its capabilities in purchasing raw materials and calculates the free number of items to be received from suppliers, and also coordinates the contractor by sorting from the information database. Information on the parameters may be different - what quantity of raw materials is the minimum or maximum, what deadlines need to be met and what price to announce to customers. In addition, the final delivery date must be taken into account, referring to production lead times. Next comes the selection of applications to suppliers for ordered raw materials for furniture development. This is necessary in order to primarily track important actions and maintain the order of the queue. Next, all requests are combined with the supplier’s prices and an analysis is carried out based on the availability of funds from the plant. If the plant is satisfied with everything, then the final application is processed and generated by the delivery service chosen by the manufacturer. At the last stage, as goods arrive at the warehouse, invoices are issued. All these processes are difficult to cover with manual accounting, and that is why furniture factories use software to solve organizational problems and manage key business processes.

In order to make it easier to work with documentation and all trade turnover, the Universal Accounting System was invented - a program for automation production processes. With the help of the management system, the organization of furniture production management goes beyond the usual understanding of the management system. Furniture production management at the initial stage means installing software on desktop PCs or laptops, then setting up a local network. Furniture production management can be very easily automated and systematized in the way you need. With the help of the Universal Accounting System, you can easily unite several branches and offices of your furniture company across the country or even around the world remotely. You should not be afraid for the safety of all data stored on the servers of the Universal Accounting System; access for each factory employee can be configured as you wish as the production manager. The USU organization has full management accounting for all areas of development, be it work with material, final delivery to a client or to a store. A person with manager rights has full access to all information, and employees can see information that will be important to them for their work and nothing more. It is easy to enter the program itself by entering just a couple of parameters, such as login and password. This product is specially designed for organizing the management of furniture production and for trade and industrial enterprises - factories, wholesale enterprises and their specifics.

The program can be used by:

By watching the following video, you can quickly familiarize yourself with the capabilities of the USU program - the Universal Accounting System. If you do not see the video uploaded to YouTube, be sure to write to us, we will find another way to show the demo video!

After watching this video, you can quickly familiarize yourself with the capabilities of the USU program - the Universal Accounting System. If you do not see the video uploaded to YouTube, be sure to write to us, we will find another way to show the demo video!

Download production accounting software

Below are the download links. You can download a free PowerPoint presentation of the software and a demo version. Moreover, the demo version has certain limitations: in terms of use time and functionality.

Download production accounting software

Below are the download links. You can download a free PowerPoint presentation of the software and a demo version. Moreover, the demo version has certain limitations: in terms of use time and functionality.

After watching this video, you can quickly familiarize yourself with the capabilities of the USU program - the Universal Accounting System. If you do not see the video uploaded to YouTube, be sure to write to us, we will find another way to show the demo video!

Download production accounting software

Below are the download links. You can download a free PowerPoint presentation of the software and a demo version. Moreover, the demo version has certain limitations: in terms of use time and functionality.

In addition to opinions about the USU program ordinary users Expert opinions are now presented to your attention. Anatoly Wasserman was born on December 9, 1952. Graduated from the Odessa Technological Institute of Refrigeration Industry, majoring in engineering. After graduation, he worked as a programmer. Then - a system programmer. He first appeared on screen in 1989 in the club “What? Where? When?", then - at the Brain Ring. In the television “Own Game” he won fifteen victories in a row in 2001-2002 and became the best player of the decade in 2004. Five-time champion of Ukraine in the sports version of “Own Game”. Four-time champion of Moscow in the sports version of “My Game”, bronze medalist of the same competition, silver in 2017. Silver medalist of the “Connoisseur Games” - the World Games of Connoisseurs - 2010 in “Your Game”.

Addition to the program for professional managers: to develop business and increase income. A unique product developed at the intersection of two sciences: economics and information technology. There are no analogues

With the development of technology, life speeds up. You need to be on time everywhere - because the faster you do things, the more you earn. For this reason, it is very important to have a feature-rich mobile application at hand.

In addition to the opinions of ordinary users about the USU program, the opinions of experts are now presented to your attention. Alexander Druz is the first master of the intellectual game "ChGK". He was awarded the Crystal Owl prize six times as the club's best player. Winner of the "Diamond Owl" - a prize for the best player. Champion of the television version of the Brain Ring. In the television program “Own Game” he won “Line Games”, “Super Cup”, won the “III Challenge Cup” with the team, established absolute record performance in one game. Author and presenter mind games And educational programs on various TV channels.

In addition to the opinions of ordinary users about the USU program, the opinions of experts are now presented to your attention. Maxim Potashev - master of the game “What? Where? When?”, four-time winner of the “Crystal Owl” prize, twice world champion, three-time Russian champion, six-time Moscow champion, three-time winner of the Moscow Open Championship in the game “ChGK”. Based on the results of a general audience vote in 2000, he was recognized as the best player in the entire 25 years of the elite club’s existence. 50 thousand viewers of the program voted for the candidacy of Maxim Potashev. He received the “Big Crystal Owl” and the main prize of the anniversary games - the “Diamond Star” of the master of the game. Member of the board and since 2001 - vice-president of the International Association of Clubs. By profession - mathematician, marketer, business coach. Graduated from the Faculty of Management and Applied Mathematics, taught at the Department of General and Applied Economics at MIPT. In August 2010, he was elected president of the All-Russian public organization “Russian Sports Bridge Federation”. He heads a consulting company that helps various organizations solve problems related to sales, marketing, customer service and business process optimization.

In addition to the opinions of ordinary users about the USU program, the opinions of experts are now presented to your attention. Sergey Karyakin. At the age of 12 he became the youngest grandmaster in human history. Included in the Guinness Book of Records. Won the Candidates Tournament. Winner of the FIDE World Cup. World champion in rapid chess, world champion in blitz. Honored Master of Sports of Ukraine. Honored Master of Sports of Russia, Grandmaster of Russia. Awarded the Order of Merit, III degree. Member of the Public Chamber Russian Federation VI composition. Repeated winner of children's and youth world and European championships. Winner and medalist of a number of major tournaments. Champion of the XXXVI World Chess Olympiad as a member of the Ukrainian team, silver medalist of the Olympics as a member of the Russian team. He showed the best result on his board and received the first individual prize (on board 4). Champion of Russia with the best result on board 1. World champion in the Russian national team. World Cup semi-finalist. Winner of a number of international tournaments.

Control and management capabilities of the furniture production management system

  • Monitoring of furniture production management processes takes place in real time. All information is indicated in detail on the screen of your PCs;
  • It is possible to divide the organization process into development stages and track the progress of the work;
  • The USU program is installed in the shortest possible time, so you don’t have to waste a lot of time learning this program; you launched it and immediately started studying;
  • The support service can always help you via remote access with any questions you may have;
  • Independent automatic generation of application forms and orders for production;
  • The USU program for organizing the management of a furniture factory allows you to insert graphs, diagrams, tables to expand the functionality of production activities;
  • It is possible to manage the functions of sending important messages, or some promotional offers via SMS, e-mail, Viber; It is also possible to call clients;
  • Easily customizable costing so that you can see expenses and receipts for raw materials in an organization that belongs to you;
  • Logistics management and sales are also included in this software
  • Flexible forecasting system - USU can easily cope with the analysis and calculation of raw material balances;
  • USU offers the ability to configure and manage a large and general database of all counterparties and the availability of their data in the form of telephone numbers and other important information
  • Availability of lists of debtors and debts - that is, you can at any time view who you owe or who owes you;
  • The system does not require large system requirements, so it will not load the system in any way;
  • The support language is Russian, but you can always translate the USU program into the language that is convenient for you
  • There is a free demo version on our website, download it to get acquainted with the Universal Accounting System
  • By competently organizing payroll accounting for your employees in the USU, you will achieve excellent results without unnecessary fuss and hassle.

Presentation of the furniture production management program


















Order automation of furniture production management

To purchase this program, just call us at the numbers indicated in the contact information or Skype, or simply write a letter. Our specialists will agree with you on a suitable configuration, prepare a contract and an invoice for payment.