I like to buy paper lanterns instead of pretentious chandeliers. Why? Firstly, they are inexpensive. Secondly, when they become dusty or torn, they can be replaced. Thirdly, they are easy to transform, if only you had paints, napkins and free time. I have long wanted to make a balloon, but then a suitable basket was found and the idea immediately matured.

For the balloon-shade we will need the simplest things:
paper lantern,
4 napkins with sunflowers,
broken basket without handle,
flower stickers,
scissors,
tassels,
paints,
PVA glue,
5–6 meters of cord,
balloon passengers and fantasy.

When I came across napkins with sunflowers in the store, I thought that they were very reminiscent of flames that burst out of a burner and inflate a balloon. The flashlight has been lying around for a long time, all that remains is to bring all the elements together. Cut out flower pieces of the desired size.

Now you need to remove three white paper layers from the napkin so that only the colored one remains.

We carefully place it on the bottom of the lamp and coat it with PVA glue. I dilute the glue with water in a 1:1 ratio to make it easier to apply. You can use undiluted, but then there is a high risk of tearing the napkin when spreading it over the surface. For this process you need to take a brush with soft bristles.

From pieces of napkin we gradually form our flame below.

We do this until we fill the circle completely. We try to distribute the napkins so that there are no unsightly gaps.

On top I decided to duplicate the same pattern for symmetry. Let it be the sun.


To make the sunflower fire look brighter and more complete, I painted the flames with red and yellow gouache.

Now we tie a cord to the basket, distributing its segments at equal distances inside the circle. Try to keep all the knots inside the basket. Each suspension takes about a meter of cord. You can additionally duplicate it with a cord around the lamp. It is very important to center the basket; this is one of the most difficult aspects of the job. Check it, it should hang evenly under the balloon. To make this process easier, you can look through the hole below. Through it you can clearly see where the center of the basket is. A real basket made of twigs is quite expensive; you can weave it from newspapers. Master classes on newspaper weaving can be easily found on the Internet.

In the finale, I decided to decorate the center of the paper lampshade with stripes of yellow-green gouache and flower-shaped stickers. Try to find stickers on thin paper so that they do not peel off from the tissue paper that covers the lampshade. Luminous phosphor-coated stickers also look very nice on such lamps. It turned out to be a real waltz of flowers.

In our article you can find interesting crafts paper balls for all occasions. For example, you have a celebration at home, and you need to decorate the apartment. DIY paper balls are an excellent and inexpensive option.

All crafts vary in complexity from simple to unusual. Have a wonderful job and good mood.

First option.

In our master class we will show you how to create a festive paper ball with your own hands. To do this, we need a piece of white and always multi-colored paper, sharp scissors, and glue.

  • First step. First, you need to print the template in duplicate (on white and multi-colored paper) using a printer.
  • Second step. Then, of course, you need to cut it out templates and lay them out in the shape of a “sun”.
  • Third step. Glue the cut circle into the middle, connecting all the rays in one place. Fourth step.
  • Now let's move on to creating the ball. The color template is on white. Then we will connect the white rays with the colored ones.
  • Fifth step. After this, it should look like white rays will lie on top of the colored ones, now they need to be hidden again under other rays.
  • Sixth step. This is such a beautiful ornament that you can get if you intertwine different rays.

Seventh step. At the end, we will attach the rays and secure them together at one point.

How to create a paper ball with your own hands, master class

The second option is to create a ball with your own hands.

  • Now we will figure out how to make a magnificent ball with your own hands from different papers. To do this, we need three sheets of different shades, a circle template, a pencil, and sharp scissors. Cut out four identical circles from one color, and do the same with other colors. You should end up with twelve circles of the same size.
  • Let's add the circles in the order we need: two circles of the same color (for example, 2 blue), then put two circles of a different color on them (for example, 2 pink), after that, for example, two blue, and repeat in the same order. Then we bend them in half. You can put a thread in the middle if the ball needs to hang.
  • We fasten the middle with a stapler in different places. Let's divide one semicircle into three equal parts. Apply glue diagonally to the top 1/3 of the circle.
  • Then we glue it to the adjacent part. Then, with a new semicircle, we will also divide it into three parts and apply glue to the lower 1/3 part and connect it to the other. And thus, with all the semicircles, alternating, gluing all sides. This is how you can easily get a chic ball, created with your own hands, which you can hang on Christmas tree or decorate your room with it.

Products in the shape of a balloon, master class

Crafts in the shape of balloons look very cute. They can be made from paper, felt and even a light bulb.

We often throw away unnecessary lamps, but we do it in vain, since we can make beautiful crafts from them.

Now we will look at how to create balloons from different light bulbs.

For work, we will need the following materials:

  • Unnecessary light bulbs.
  • Paints for working with glass.
  • Available materials for creating a basket.
  • Threads.

First, the light bulb must be degreased, so that the paint lays evenly. Let's cover the light bulb with a background.

While it cools, you can make a basket. From paper, from corks - whatever your imagination can do. We will attach strings of a certain size to the basket. When the background of our product is dry, we need to complete the details. Let's connect the basket with the ball. You can make a loop on top of superglue or other glue to hang the ball.

Such balloons can also be created using knitting, stained glass and various improvised means.

Felt balloon.

It is quite simple to sew an air balloon from felt, but it looks very beautiful and impressive.

To do this we will need pieces of felt, a pattern, cardboard to create a template, thread and cardboard for the basket and, of course, sewing parts.

First, we will cut out 8 wedges according to the template, taking into account the allowance and one circle.

Then everything is simple: we’ll make wedges and a circle, turn the product inside out, fill the ball with cotton wool, decorate it with a basket and slings (threads).

The balloon is made of felt.

Decor with balloons.

Balloons have long come into our lives. They decorate weddings and other celebrations and give them as gifts. With the help of balloons, many make marriage proposals.

An unusual way to congratulate a person is quite simple. We will need a large box, wrapping paper, balloons, which are inflated with helium. It is advisable that there is a present at the bottom of the box. Such a surprise is created before delivery. The required number of balloons is inflated and closed in a box. When the box is opened, the balls take off sharply!

You can make air balloons with your own hands, both for launching and for decorating premises in ordinary life or on holidays. Conclusion. I hope that after our detailed article, you finally understand how to make balloons from different materials.

How to make a real papier-mâché balloon with your own hands so that it can then fly? What is required for such a craft, how complicated is the process? In reality, most products of this type do not require a long time or special knowledge.

Thanks to detailed master class Any beginner can do it. But the finished craft will amaze everyone around you. You can make bright multi-colored balls, put them in baskets, or paint them to make laughing faces. Whatever you want, you are limited only by your imagination.

To make a papier-mâché ball into an inflatable balloon, you will need the following materials:

  • a stack of unnecessary newspapers;
  • liquid paste;
  • ordinary rubber ball;
  • several brushes.

Detailed instructions:

  1. Prepare the paste by diluting it in some unnecessary container of decent size.
  2. Tear the newspaper sheets into strips 2.5 cm wide each.
  3. Inflate the balloon, making sure that it does not exceed the dimensions of the finished craft.
  4. Carefully cover the finished ball with paper strips previously soaked in paste.
  5. Important: after wetting the paper, immediately remove all excess liquid by rubbing it with your fingers. This should be done in advance, before gluing.
  6. When gluing the strips, carefully straighten the folds with your fingertips. It is more convenient to do this with a brush. Proceed step by step, then the toy ball will turn out beautiful and smooth.
  7. When finished, leave the product to dry. Now carefully pierce the ball inside the newspaper strips and remove it through the small remaining hole at the bottom (this must be left in advance, even before gluing the newspaper).






If you need a white ball, simply paint the dried workpiece with paint of the required color.

Globe or moon made of papier-mâché

How to make a ball - a planet from papier-mâché? I want to create something special. For example, planet Earth or the Moon. Here the basic principle of making a ball will remain unchanged.

Step by step instructions:

  1. Make a newspaper ball, trying to make it as smooth as possible (without wrinkles) and medium in size. Inflate a regular rubber ball, then gradually cover it with strips of newspaper soaked in glue. Wait until the product is dry, then deflate the balloon. The preparatory part is finished.
  2. Now for the example you will need a real globe. It is more convenient than flat pictures. To make the globe look as realistic as possible, you need to redraw the outlines of the continents, individual islands and oceans of the Earth onto a finished paper ball. To do this, arm yourself with acrylic paints.
  3. Is it convenient to color a newspaper or is it worth additionally covering the top of the ball with white paper? You can paint it first with white paint and then apply the outline of the Earth onto it. Or cover it with A4 paper, cutting it into strips as well. The technology seems more complicated, but in practice everyone can cope, even beginners.










In this way you can create any planet with solar system and then hang them together, creating a composition. It is important to maintain the dimensions, remembering that Jupiter is large, Mars is small, and Earth is medium.

Balloon with basket - master class

Here you can choose the manufacturing technique.

Option number 1. Beautiful ball. If you need to create a craft quickly, then look for a beautiful small colored ball. Preferably round in shape. Weave it from a thick thread or take a ready-made mesh. Make sure that the ball fits comfortably inside and that the edges of the mesh remain free. Trim carefully if necessary.

Creating a cart. You can cut it from a regular plastic cup and paste it on the outside. Or glue it from a sheet of cardboard. If you have a ready-made basket, even better. Tie it using the loose ends of the threads to the ball. Ready.

Option No. 2. Volumetric balloon with a fabric basket. Great New Year's surprise which a child can do if prompted.

You will need:

  • unnecessary newspapers;
  • ordinary rubber ball;
  • diluted paste;
  • brush;
  • pieces of multi-colored fabric (preferably one type);
  • cardboard;
  • a ball of rope or braid.

Step-by-step instructions:


Such a papier-mâché balloon will turn out beautiful, large and can then be hung from the ceiling.

  1. Making a paper (newspaper) ball. Following the instructions described above, inflate the ball, then sequentially cover it with thin strips of newspaper, dipping them into the paste. Do not tape the space below, around the tail. Leave a hole.
  2. While the workpiece is drying, you can make a basket. To do this, take cardboard and glue a small basket step by step, focusing on the ball.
  3. Carefully make 4 small identical holes in the top of the finished basket. Make sure they are symmetrical.
  4. Decoupage ball. It has dried, now deflate and remove the rubber base (inflated ball). Cover it with strips of fabric/colored paper (whichever is preferable). Carefully make 2 holes on top, placing them close. The papier-mâché ball is ready.
  5. Measure 2 pieces of rope. You take one, put the tip through one of those holes at the top of the ball, then pull it out through the second. Center so that two identical ends hang down. Tie them by securing them in two opposite holes in the basket. Do the same with the second remaining rope. Tie the ends alternately to two of the four holes (see picture).
  6. At the top of the children's toy you can make an additional loop through which it can then be hung from the ceiling.

The creativity will be completed with a small doll or man with Lego, ready to fly.

Balloon - Smesharik made of papier mache

It's easy to do. To create a cute Smesharik you will need:

  • dye;
  • several brushes;
  • sheet of cardboard;
  • scissors;
  • finished picture.

The first step is to make a regular paper ball, pasting it with newspaper strips. Then, when it dries, decorate the product by painting it like a Smesharik. Draw a smiling face in front, and attach the missing parts like ears, arms and legs separately.

Cut them out of a sheet of cardboard or “blind” them using a napkin soaked in glue. Some people take plasticine. The paper ball is quite dense, so you can attach various parts without fear of its destruction.

We present to your attention a new resourceful idea in origami style. Little ones balloons made of paper will not only decorate your interior, a good gift but children will also really like it. Making them is so fun that you can easily do it together with the whole family.

What do we need to make paper balloons:

1. Select the material for the workpiece. Whatman paper is better suited, since plain paper will not give a beautiful shape, and the cardboard will not be convenient for subsequent work.

2. We draw the pattern presented in the figure below on the material for the product and cut it out.

3. Let's start working on the ball itself. We need two identical pieces, which we place one on top of the other and begin to weave. To prevent the paper from flying apart during the process, we use paper clips, as shown in the picture. For convenience, we finish the weaving with small tongs, and secure the ends to the middle with glue, creating a beautiful outline at the bottom of the ball.

4. Cut out all the parts of the basket, glue them together and attach them to the finished part.


5. At the end of the process, the origami masterpiece can be painted, it all depends on taste, or you can first use colored Whatman paper.
If you connect several balloons together using fishing line and small, decorative, round-shaped sticks, you will get an interesting hanging carousel.



Scrapbooking paper is perfect for creating such balloons, a large selection of sets and a rich color scheme will make your balloon baskets unique.

Today we will show you how to make your own balloon from colored paper. You can creatively decorate the interior of a child’s room with these balls by attaching them to the ceiling using threads or thin fishing line. You can also make a children's mobile from them. You can attach paper balls to the frame using ordinary threads, thin satin ribbons or decorative laces. If you use ordinary threads or fishing line, then for a more decorative look, string several bright beads of different sizes and shades on them.

So, to create a ball, let's prepare some materials:

  • colored paper in two compatible shades, we chose brown and blue;
  • cardboard of any color;
  • glue stick;
  • scissors;
  • paper clips;
  • pencil.


How to make a paper balloon

Step 1. First you need to create a template according to which we will cut out the main parts of the ball. To do this, draw this outline on reverse side cardboard Then, side by side, draw another small circle. Carefully cut out both templates.



Step 2. Now their outline must be transferred to colored paper.

We trace the template with a pencil, and then cut out the first part of the ball. Create 11 more of these blanks. We also create a circle from colored paper to capture thin details.


Step 4. Create a ball basket from brown paper. We cut out the following blanks from it.

Step 5. Fold the brown twists as follows.

Apply glue to a small circle and glue it to the base of the workpiece.


Do the same manipulations with the blue coils.

Step 6. We combine the two parts together and begin weaving the ball.

We put turns of a blue shade under the brown ones. This is what should happen.



The top of the ball began to appear.

Step 8. Now we bring the brown turns to the top, then the blue ones again, etc. We must fix all intersections of strips with paper clips!


The ball will gradually take on the desired shape.

Step 9. Glue the last row of strips together and remove the paper clips. Now we bend the ends of the strips inside the ball.


The children and I recently made such a balloon and, hot on our heels, made MK for those who will like it.
The time to make it (with the parts cut out) is about an hour and a half, it all depends on skills and age. I have done this for 7-8 year old children, they need the help of an adult.

You will need glue (PVA, stationery glue, Moment "Crystal" glues well, and in some cases a glue gun with hot glue is very helpful), 20 circles of paper, several strips of paper for a basket length = 4 x the length of the side of the basket (mine is 5 cm) + 1 cm for gluing and 1 cm wide, base for the basket (I have a 13x13 square of paper), ribbons, braid, at the end of production any decor - flowers, beads, rhinestones. Schemes for drawing circles and baskets are given at the end of the MK.


Let's start making a basket. We braid the edges of the basket with a paper strip in a checkerboard pattern. To prevent it from flying off, I secured it with a paper clip at the beginning, after braiding all sides, we glue the tip of the strip (1 cm) to the wall of the basket and then in several places on each wall we glue the walls to this strip. Then repeat with the second strip.


We finish with the third strip, gluing all the protruding ends of the walls to the paper strip.


You can glue any braid, lace or ribbon to the edge. We take 4 wooden kebab sticks, wrap them with ribbon, fixing them with glue on the edges.


Let's start gluing the ball. Apply glue to the bent edge, fold two circles, matching the bent edges and fix it. In this way, we glue five circles so that the sharp vertices converge at one point. It turns out to be a hemisphere. Let's make another hemisphere. Then we glue a strip of 10 circles, directing the sharp vertices of the triangles alternately up and down.


We close the strip into a ring, gluing the outer circles, and then glue the hemisphere on top and bottom, folding the 5 remaining free edges of the hemisphere with the 5 edges of the strip.


This is what the ball looks like after gluing one hemisphere (photo above), then put on the top hemisphere and glue it. We get a ball.
Now assembly. Glue the skewers to the basket, fixing them with Moment or hot glue in the corners of the basket. The fastest way to glue the ball to the skewers is with a hot gun; we determine the gluing points by eye, leaving one of the tips at the top.

Then we start decorating - covering the places where the skewers are glued to the ball and the remaining holes in the places where the tops of the triangles are glued with bows or flowers or rhinestones; I glued a bead at the top. Add an inscription and flowers to the basket. The ball is ready. You can use it as a gift basket - put a small gift, candy or chocolate inside.

How to prepare circles for a ball. Here it is very important to make the correct markings for a neat appearance of the ball. Let's remember geometry and fit an equilateral triangle into a circle. How to do this: Draw a circle with a compass with a center at point O, take an arbitrary point D on the circle, measure the segment DO (the radius of the circle), plot the length of the radius from point D on both sides using a ruler so that the end of the segment lies on the circle (this will be points A and C) or draw a circle from point D with the same compass (that is, with the same radius), place points of intersection with the circle in both directions (we get points A and C). This will be one side of the triangle. Now from point C we draw a circle with a compass with a radius equal to the side of the triangle AC until it intersects with the circle (or we use a ruler to draw a segment from point C equal to the side AC, so that the end of the segment lies on the circle). This will be vertex B. Connect points A and B. My side of the triangle is 2.8 cm. We bend it up along the sides of the triangle. TO speed up the marking process, draw a triangle on one circle of thick paper, cut it out, then apply it to the circles (you can take one at a time or several at once, if the paper is not thick) and bend the edges of the circles, holding the triangle in the middle. Or we apply a triangle to each circle, trace it with a pencil and then fold it over. Or we take several circles, fold them into an even stack, put a circle with an inscribed triangle on top and at the vertices of the triangle with scissors we make small cuts all over the stack at once, and then fold the edges, guided by these cuts. This stage is the longest and most boring.

Instructions for making a ball with a basket.

Balloons with baskets that float in the sky are associated with something unusual. With the help of simple manipulations you can create cute balls from papier-mâché, fabric or even light bulbs. They will be a great decoration for photo shoots or New Year's, and will also help you spend time with your children.

How to make a craft balloon with a paper basket: master class, patterns, photos

One of the most simple options To create a ball with a basket is to use ordinary balloons. To work you will need cardboard, colored paper, twine, and a balloon.

Instructions:

  • To begin with, you can make the lower part. That is, the basket itself. If you don’t know how to do this, you can take a yogurt cup and simply cover it with colored paper, imitating weaving a basket.
  • Inflate the balloon and use a strand of twine to tie it up.
  • Tie the balloon to the prepared basket. You can hang a ball with a basket in the children's room, and put some kind of children's toy inside. This option is ideal for young children who are just learning to use scissors and glue and need to develop them fine motor skills hands


balloon with paper basket balloon with paper basket

How to make an applique balloon with a basket: master class, patterns, photos

Very often, the appliqué technique is used to make a ball with a basket. Actually, this option is also ideal for kids. preschool age. It also helps develop fine motor skills and handle stationery.

Instructions:

  • You need to cut out two ovals of the same size. After this, fold it in half lengthwise.
  • Next, glue these two parts onto one strip of glue. It is necessary to make this ball three-dimensional. Now you need to glue the ropes.
  • Use a rectangle of colored paper to imitate a basket. It can also be convex, voluminous or flat.
  • After this, connect the threads to the basket and decorate the applique. Can be decorated with white clouds. A background made of thick blue cardboard looks best.


applique balloon with basket

How to make a balloon with a papier-mâché basket?

A ball with a basket can be made using the papier-mâché technique.

Instructions:

  • To do this, inflate a balloon and cover it with several layers of napkins. Choose the cheapest, most common napkins. The more layers, the more durable your ball will be after the whole structure dries.
  • Varnish or paint with regular paint. If you wish, you can cover it with lace or braid.
  • Next you need to glue the ropes and attach the basket. It can be made using papier-mâché technique. But the easiest way is to use a glass of sour cream, yogurt or kefir.
  • Cover it with paper first. The decoupage technique using napkins is often used for decoration. Cover the glass, that is, the basket. Glue it to the ropes and hang the ball at the top of it.




balloon with papier-mâché basket

How to sew a balloon with a fabric basket: pattern, master class, photo

A ball with a basket can be sewn from fabric. Below is a pattern of sectors that are used to make the upper part of the ball.

Instructions:

  • It is necessary to cut out 6 such petals and sew them. You can use sewing machine or sew by hand. After this, the ball itself is stuffed with padding polyester or cotton wool.
  • A circle is cut out along the diameter of the lower part and sewn on. Next, you can resort to making a basket. One of the simplest options is pasting plastic cup fabric to match the fabric that was used to make the ball.
  • After you have covered the outer and inner parts of the cup, use a hole punch to make several holes and tie twine to the ball and basket.
  • You can put small items inside the basket. soft toys or a doll.


balloon with fabric basket

How to crochet a balloon with a basket: diagram, description

You can make a ball using a hook. Below are knitting patterns and videos.

VIDEO: Crochet basket



Knitting patterns

New Year's ball and basket: ideas, photos

Looks very cute and unusual christmas balls with a basket. They can be made from already purchased Christmas tree balls or use a more interesting method.

Instructions:

  • Use a regular incandescent light bulb that has burned out. You need to paint it in white and decorate using decoupage techniques. You can use a napkin. That is, apply PVA glue to the painted lamp and glue a layer of napkin with a pattern. There may be some kind of New Year's theme, for example a fir branch with toys or Santa Claus on a sleigh.
  • After the lamp is pasted over, you need to paint the lower part, that is, the base that is screwed into the socket, black or brown.
  • Next, you need to use a regular drink lid from plastic bottle. Apply glue and sprinkle generously with glitter. When it is dry, you need to glue several ropes of twine to your ball, that is, to the light bulb. Connect with twine to the bottom and to the basket, the lid of which is covered with glitter.
  • Next, simply attach a loop to the top and hang the toy on the Christmas tree. You can decorate with beads, glitter, seed beads, pieces of lace or braid. Broken old glass ones look very nice Christmas decorations. They are used as a topping for decorating New Year's balls.


Balloon with basket for a photo shoot: ideas, photos

Often, balloons with a basket are used for decoration and as a decor for a photo shoot of small children. Kids are placed in these homemade balls and photographed. In fact, this kind of photo turns out to be very lively and unusual.

Instructions:

  • To make such decorative element You'll need a large wicker basket, which you can purchase at the store, or a rattan or wicker laundry container. They can also be purchased on the market.
  • You need to sew a cover in order to put it inside the basket. After this, proceed to making the upper part of the dome. For this, a large inflatable balloon is used, which is inflated with helium. It should float in the air.
  • Using strings of twine, you need to weave a kind of mesh. It is in this mesh that the balloon is placed so that it does not fly away. Tied to a made basket. If desired, such a ball can be decorated with a variety of decorative elements.


A ball with a basket is a rather interesting and unusual item that can be made both for a photo shoot and for decorating a New Year tree.

VIDEO: Ball with a basket of light bulbs