Colored printable maple leaves templates for cutting. Template for paper cutting: oak, maple

On this page you can download and print stencils and coloring pages of leaves of various trees. All versions of tree leaves can be printed on a printer to be used as coloring books for children or as stencils for decoration. Stencil forms are usually printed, carefully cut out, and then used for their intended purpose. For example, artistic painting of walls or as independent design elements. All proposed stencils and colorings of tree leaves are presented in vector PDF format. They can be downloaded or printed without loss of quality in any size, not just A4.

Maple leaf - stencil and coloring

Below you can download or print the maple leaf. The maple leaf located on the left is suitable as a coloring book. From the link on the right you can download or print a maple leaf stencil, which has a thicker and shorter stem that is easier to cut.

Tatyana Perova

To make these leaves,needs to be prepared:templates leaves(I found on the Internet, double-sided color paper, a simple pencil, scissors and transparent self-adhesive film (texture).Have you prepared? Then let's get to work! 1. From colored paper cut out the one you like leaf.

2. Bend the cut sheet in half.

3. Not far from the edge, draw an outline with a simple pencil leaf.

4. Cut along the drawn line.

5. Reveal.

6. Let's prepare a self-adhesive film. Half a film (on the sticky side) put the cut out leaf.

7. "Cover" leaf the second half of the film (leaf should be inside, like laminated).

8. Then (not very close) cut out sheet along the contour. The leaves are ready!

Such leaves you can decorate information corners, windows, or you can make a hanging mobile.

Publications on the topic:

"Autumn Leaves" Drawing in an unconventional technique"We draw in unconventional technology" Topic: "Autumn Leaves" Program content. Teach children to work using the "spray" technique. Cultivate accuracy.

Applique using cutting technique. For the lesson we will need: prepared sheets of paper (which we will divide into two halves, corrugated paper.

I bring to your attention a simple DIY craft. Module of autumn leaves. Required material for the manufacture of the module: -Double-sided.

Vytynanki is a very ancient type of applied art of the Slavs. It was used to decorate homes both in everyday life and for holidays.

ECD for young children “Autumn Leaves” Topic: Autumn leaves Program content: Artistic creativity: - to arouse children's interest in co-creation- drawing with paints.

Summary of educational activities for the art activity “Autumn Leaves” Objectives: Learn to draw from life, convey the shape and color of autumn leaves. Learn to mix paints to obtain shades. Develop creativity.

Autumn leaves Synopsis of the joint directly educational activities according to activity centers with children 4-5 years old Theme: Autumn leaves Means: bouquet.

And although autumn is already coming to an end, and everyone is looking for it with all their might, the theme of autumn leaves is popular at all times.

Handicrafts are especially fond of the maple leaf, a template of which I am giving you today in different variations. It is so unusual, beautiful, and the color of this leaf can be very different - yellow, orange, red, not to mention green.

In general, it is not surprising, but a maple leaf stencil can be found quickly and easily.

Where? In nature itself, of course! We go to the nearest park for shopping, collect fallen leaves - and voila! - a sketch from which we will draw in our hands.

There is nothing easier than attaching a leaf (after straightening it, of course) to the paper and carefully tracing it. You can then complete the “web” of lines yourself. Or you can use contour to get an unusual effect.

But, unfortunately, this tree does not grow in all regions of Russia - this is the case. Someone didn’t have time to make a herbarium during the summer-autumn, and in winter it’s no longer possible - that’s two. Well, it’s so easy to print out a picture without leaving home and start creating, right?

Still, I encourage you to go for walks more often (especially if you have children) fresh air. Children can be taught to make beautiful wreaths from maple leaves. Well, dry the leaves, of course. You can always make beautiful and original crafts from them.

Very large size of the leaf image (useful for large-scale painting):

In general, choose any one to suit your taste!

Galina Gavrilina

Master class

"Maple leaves from crumpled paper"

Every season is beautiful in its own way... Autumn is a time of colorful colors. Inspired by the arrival of the autumn sorceress, the guys and I decided to decorate our group with this kind of collective work.

It's bright autumn tree gave us her smile and good mood!

The basis for our tree was a paper tree from a purchased design kit. You can also make a tree yourself: draw a trunk and crown without leaves on a sheet of whatman paper, then cut it out along the contour.

For work we will need:

A sheet of white writing paper;

Paints (gouache or watercolor);

Brush;

Jar of water;

Maple leaf template;

Felt pen;

Colored pencils;

Scissors.

Sequence of work:

1. Crumble a sheet of white paper into a ball with your hands.

2. Soak in cold water.

3. Gently squeeze it out and straighten it.

4. Cover the wet sheet with another clean white sheet and place it under a press (thick book) to smooth it out. After drying, the sheet should look like this.

5. Take paints and randomly color the resulting white sheet in the colors of autumn: yellow, orange, red, light brown, yellow-green, etc.

After drying, we place the sheet under the press again to straighten it.

The sheet on the left is painted with watercolors, and the sheet on the right is painted with gouache.

6. Apply a maple leaf template to a dried multi-colored leaf and trace it with a felt-tip pen or pencil (the template can be made by tracing a regular maple leaf).

7. Cut along the contour with scissors.

8. Thanks to the crumpled paper, the leaves already have veins. If desired, you can add large veins with colored pencils.

These are the leaves you should get. We attach the finished leaves to the branches of the tree.

Our autumn tree is ready. The leaves turned out just like real ones!

I wish you creative success!

Publications on the topic:

Hello, dear colleagues! I want to show you our works that we create with our kids (3-4) years old. joint activities from.

Summary of GCD in the middle group Drawing using the poke method and the crumpled paper method Summary of GCD in middle group Drawing using the poke method and the crumpled paper method “Animals of hot countries. Elephant" Topic: Animals of hot countries. Elephant.

Dear colleagues and caring parents! This master class will be especially valuable for preschool workers whose students do not yet know how to do this.

I bring to your attention a simple DIY craft. Module of autumn leaves. Required material for making the module: -Double-sided.

Vytynanki is a very ancient type of applied art of the Slavs. It was used to decorate homes both in everyday life and for holidays.

A wonderful time of year has come and I decided to decorate my group with autumn leaves. Just draw and cut out colored leaves? No.

The article presents a variety of paper accordion leaves, templates and step by step instructions creating a particular sheet. Such leaves can be in very different colors, for example, if they are dedicated to autumn events - it is better to use colored paper in yellow, orange and red colors, for spring - good option There will be leaves of light green and green shades. Even for winter celebrations, you can make leaves from silver or white paper.

For work you will need the following materials:

Colored paper of various colors suitable for leaves;
Scissors, glue stick, simple pencil.

Paper accordion leaves step by step: 8 options with templates

Option 1. Accordion paper maple leaf

You will need yellow or green colored paper. Cut an arbitrary rectangle from it.

Fold it in half.

Draw or print the template for yourself. Cut it out and attach it to the colored paper folded in half, taking into account that the straight long side on the template falls on the fold.

Trace with a pencil. In the photo the fold is on the left. And in the future, all stages presented with paper folded in half will be folded on the left.

Cut out the workpiece, carefully cutting off all wavy lines.

Now open it. You should end up with a similar piece, with symmetrical edges.

At this stage, it's time to make a paper accordion. It is better to start from the bottom, widest side. Fold a small fold, no more than 7 mm wide, but extending over the entire area of the sheet. Press carefully and then fold the same fold in the other direction. Repeat this process until all the paper has turned into an accordion.

For convenience, turn the accordion over with the long side up.

Find the middle and fold it in half. Press well, especially in the area of the bottom fold, and glue the inside sides together. In the photo this area is shown with arrows.

Depending on the structure of the paper, sometimes it becomes necessary to glue the bottom two or three folds of the sheet. Most often they come apart in very thin paper. Dense holds all the folds together well without glue.

The accordion paper maple leaf is ready, straighten its folds and glue a thin stem.

Option 2. Autumn leaf made of accordion paper

Of course, it can be not only autumn. If you make it from green paper, the leaf will look like spring or summer.

To create it you also need a rectangular piece of paper.

As in the first option, the paper needs to be folded in half.

Then you should use a template or draw a simple zigzag line, reminiscent of one part of a Christmas tree.

This line should start from the fold of the paper and end at the bottom.

Cut out the drawing obtained using a template or your own efforts.

Open the sides.

Make small folds, length from one side to the other, and width of 5-7 mm. If the sheet large size or children are small, the folds may be larger.

The accordion is made; for convenience, turn it wide side up.

Mark the middle and carefully fold it in half. Press down, especially at the very bottom.

Apply glue to one of the inner sides and glue them together. In the photo this area is shown with arrows. If necessary, glue a few folds at the very bottom of the leaf.

At the end, straighten the accordion sheet a little and glue the petiole, which is a thin strip of colored paper from which the sheet itself is made. But such a stem is not strong, it can only complement the leaf, and, for example, gluing leaves to a homemade tree will not work. It is better for these purposes to use colored cardboard, or colored paper, twisted into a flagellum and threaded through a hole in the bottom of the sheet.

Option 3. Oak sheet of accordion paper

The outline of this leaf is similar to that of an oak leaf, only the longitudinal folds slightly worsen this definition. But for variety, this version of the leaf will also come in handy, especially in those jobs or events where you need a lot of leaves of various shapes.

Cut out a square from paper.

Fold it in half, the fold is on my left.

Use a template or draw large waves yourself, starting from the fold side and reaching the bottom side.

Cut the part through two sides at once, but without touching the left one. She must be whole.

Open the paper.

And, as always, make thin folds, starting with the widest part of the paper. Carefully fold all the paper into an accordion, one fold in one direction, the next in the other. For convenience, the paper can be turned over during operation. As a last resort, draw light longitudinal lines with a simple pencil and fold the leaf along them.

Place the resulting accordion with the longest side facing up.

Find the middle and fold the accordion in half. Glue the inside sides together.

Straighten the folds, glue the petiole and oak leaf the accordion is ready.

4 version of accordion paper sheet

This species looks like a hornbeam or beech leaf. And on the leaves of many other trees. The main thing is that it does not require any templates; it is extremely simple to make.

To make this oblong leaf, you need triangular-shaped paper. You can first cut a square out of paper.

Fold in half, connecting opposite corners.

Cut in half and you get two triangles.

You will need one triangle per sheet. Turn it wide side down and start making folds there, like an accordion.

Turn the entire triangle into an accordion.

For convenience, turn it over with the longest side facing up.

Find the middle and fold exactly in half, bringing the ends together. In the middle, apply glue to one side and glue the side parts together.

Straighten it a little and glue the stem. The sheet is ready.

5 version of accordion paper sheet

The most common type, the shape resembles the leaves of poplar, linden, and birch. For variety, let it be green, although the leaf in the autumn, yellow-orange version is no less interesting.

It requires a not very wide paper rectangle.

Fold the rectangle in half, the fold in the photo on the left.

Use a template or draw a convex line yourself, the beginning of which is from the side of the fold, and the sloping slope reaches the underside of the sheet folded in half.

There are no exact proportions or markings here. If you want a more prominent narrow tip, the indentation on the line can be made more pronounced.

Cut out the design without touching the left side.

Open the paper.

Make an accordion, starting with the straight, longest side. As usual, the width of the folds is ideal in the region of 5-7 mm.

Turn the accordion over with the straight side facing up.

Fold in half and glue the inside sides together. If necessary, glue the bottom folds.

Spread the leaf and glue the stem.

Option 6. Another maple leaf made from accordion paper

There are quite a few varieties of maple leaves made from folded paper. It all depends on the template. There are very simple ones that can be drawn almost arbitrarily, and more complex patterns that it is still advisable to follow as accurately as possible. In the second case, the maple leaves are more perfect, closer to the original.

Despite the fact that I was the first to show one type of maple leaf, I still can’t resist and show you another one that I really liked.

For this you will need square colored paper.

This square then needs to be folded in half.

Print the template and carefully reproduce its lines on colored paper, taking into account that the fold is on the left.

Then everything is as usual. Unfold the paper piece.

Make narrow folds, starting from the straight, wide side and up to the very top.

Find the middle and fold the accordion-folded paper in half. Here you can see that this yellow paper is thinner than the previous ones; at the very bottom the folds are not held together. Therefore, they need to be forced to do this with glue. You can safely apply glue at the fold on the three lower folds. And, of course, glue the inner two sides together, where shown by the arrows.

Straighten the folds a little, glue the stem and the beautiful, accordion-style autumn maple leaf in this version is ready.

7 version of accordion leaves

Simple round shape sheet. There can be a variety of colors inherent in the leaves.

You will need a rectangular piece.

Fold it in half.

Using a compass or something suitable round, draw a rounded line connecting the sides of the paper. The fold is in the photo on the left.

Cut along the outline.

Open it up and you will have an even semicircle.

Make small folds, starting from the straight side of the semicircle and to the very top.

Turn the accordion piece over so the long, straight side is facing up.

Fold in half and glue the inside sides together.

Carefully straighten and glue the stem. The round sheet is ready.

Option 8. Thin oblong accordion leaves

The shape is inherent in the leaves of willow, olive and some others.

To make such a sheet, you need a rectangular, rather narrow strip of paper. The narrower it is, the thinner the leaf, although it is more difficult to make very thin ones.