You can use office paper for cutting out snowflakes, colored paper For children's creativity, paper for origami.

It is convenient to use ordinary stationery scissors to cut out relatively large sections of the pattern, for example along the edge of a snowflake.

For cutting small parts and complex patterns, it is better to use hairdressing scissors and manicure scissors.

DIY snowflakes

So, the paper and scissors have been selected, now you can proceed to the first stage of making snowflakes - folding the paper. To obtain a hexagonal blank from which a snowflake will subsequently be made, cut out a square of the required size from a sheet of paper.

How to get squares of different sizes from an A4 sheet

1. Fold a sheet of paper in any way, but so that one part is larger than the other, and then cut along the marked line.

2. Fold most of the sheet along a bisector.

3. Cut off the excess paper to make a square.

4. Blank for big snowflakes ready.

5. Repeat steps 2-3 with the smaller part of the sheet remaining after step 1.

6. The result is a blank for a medium snowflake.

7. With the trim remaining after step 6, repeat steps 2-3.

8. The result is a blank for a small snowflake. Thus, from one A4 sheet you can make blanks for three snowflakes of different sizes.

The dimensions of the blanks may vary slightly. They depend on how the original sheet was folded in step 1. In addition, a large snowflake can be obtained by cutting a square from a whole A4 sheet.

How to fold a hexagonal blank from a square

Now from the square we need to fold a regular triangle (in unfolded form - a hexagon), from which a snowflake will be cut.

Method No. 1

1. Fold the square in half.

2. Then fold the sheet “by eye” so that the angles indicated in diagram 3 are equal.

3. Turn the workpiece over to the other side.

4. The fold should run along the edge of the workpiece, bent in step 2 of the layer, and the top edge should coincide with the left fold.

5. Trim off any excess paper evenly.

Method No. 2

1. Fold the square diagonally.

2. Mark the middle of the leg of the resulting triangle (side).

3. Connect the vertex (right angle) of the triangle with the intended middle of the leg. Mark the fold line and again unfold the workpiece to a triangle.

4. Now mark the middle of the base of the triangle.

5. Connect the middle of the leg with a point lying on the marking line obtained in step 3. The fold line should pass through the middle of the base of the triangle.

6. Connect the base of the triangle to the fold line obtained in step 5.

7. Cut off the excess paper along the indicated line.

Advice

Choose the size of the hexagonal blank (large, small or medium) yourself based on the paper you use for cutting, the complexity of the snowflake and your skills in working with scissors.

Cutting out a snowflake

1. Fold the regular triangle obtained using one of the methods suggested above (an unfolded hexagon) in half. Perform all actions very precisely so that later you do not cut through the layers of paper folded crookedly with scissors. Make sure that the circled tip (see diagram) is in the center of the future snowflake.

2. Start cutting. In the diagrams, areas of paper that need to be removed are indicated in bright pink. First, form the outer edge of the snowflake. To do this, cut out a pattern on the top side of the workpiece, as shown in the diagram.

3. Then cut out the pattern on both sides of the workpiece. The last to be cut are small elements inside the workpiece and near an acute corner.

4. The snowflake is ready, all that remains is to carefully unfold it.

We will cut out all the presented snowflakes according to this description, starting from step 2, when the regular triangle is already folded in half. The fact is that all snowflakes are cut out the same way, only the pattern changes, so we did not repeat the description of the work many times, but limited ourselves to only exact diagrams.

The process of making each snowflake consists of 3-5 sequential diagrams, on which the areas of paper to be removed are indicated in black. The last diagram, which shows a completely cut out, but not yet unfolded, snowflake, is also a template. You can “by eye” draw a pattern from it onto your workpiece, or transfer it using tracing paper and carbon paper.

Advice

The snowflake should look like a graphic image with a clearly readable pattern, so perform all stages of the work very carefully and accurately.

Snowflakes. Schemes

Such snowflakes will become beautiful New Year's interior decoration .

More options for making snowflakes

Snowflake. Step-by-step manufacturing process

Take a rectangular sheet of white paper and, following the instructions, cut out a snowflake from it. Imagine, come up with your own patterns, and you will get the most unusual and beautiful snowflake!

Have a nice snowy day, friends. Why snowy? Today your warm, windless houses will be filled with mesmerizing snowflakes. Precipitation indoors is unlikely, I will just reveal the secrets of creating various “ice” crystals. The methods are suitable even for those who were unable to tame the scissors during school labor lessons. Follow the tips, then angular, sloppy paper snowflakes with your own hands will become sophisticated ornate works of art.

For a graceful carved craft you will need 3 simple ingredients: sheets, sharp scissors and imagination. The rules here are followed only when preparing the base, and the pattern can be absolutely anything: Christmas trees, stars, monograms, hearts, diamonds, tangled lines.

I’ll tell you how to cut snowflakes out of paper with your own hands step by step:


To a beginner, the scheme will seem complex and confusing. But the principle of operation will definitely become clear during the process, you just need to take a sheet and make 1-2 correct blanks. Short practice - best way figure out how to cut snowflakes from paper with your own hands step by step.

The folded “semi-finished product” needs to be filled with a pattern. It can be drawn in advance with a pencil or improvised - each craft will be unique. The cuts at the base correspond to the edges finished product, at the top of the triangle - the middle, along the sides - the “body”.

Please note: the sheet is folded several times, all the notches made will be mirrored and duplicated in each segment of the circle.

Simple patterns of beautiful paper snowflakes

Is your imagination letting you down? Does creativity cause mistrust? Use existing cutting patterns to create your craft. Snowflakes are created using lines kindly drawn by other people. The drawings are printed out in their entirety or redrawn onto a folded triangle and unnecessary segments are cut off.

There are a great variety of scheme options. The surface of the improvised “ice” is filled with abstract patterns, colors, figures of people, animals, cartoons, fairy-tale heroes. Here are the easiest guides.

"Herringbone"


From the top to the middle of the base, draw a straight line 0.2-0.5 cm wide, focusing on the size of the sheet. On both sides, draw several equally spaced segments at an angle of 30° to the “equator”. The resulting series of strips must be cut one after another. Leave the vertical line intact, otherwise the product will fall apart in two.

"Angels"

A more complex option, but the presence of the necessary diagram is the question “How to cut snowflakes from paper with your own hands step by step?” instantly removes. Draw the outlines of 1-3 angels, if desired, complement the pattern with lines. Cut off unnecessary material. When you go around the contour of the figure, leave thin paper “bridges” - the character should stay on the body of the craft.

"Monograms"


Monogram “ice” turns out amazing with a minimum of effort. The pattern is repeated throughout the product, it seems too intricate and difficult for a person to execute. Take the diagram, fill the blank with any monograms you like or many intertwined lines. All that remains is to get rid of the excess material and unfold the sheet.

See what other results you can achieve with. The process of creating products follows simple principles - we translate the drawing, use scissors. The result looks like a real frosty miracle.

Cutting out beautiful paper snowflakes according to patterns: 3 tips

It didn’t take me long to make beautiful paper snowflakes; at first I had to ruin several dozen sheets and sacrifice my pride. Through countless trials and errors, a list of rules for creating crafts appeared. I use it when I plan to surprise others with my ability to control scissors, and I advise you to follow the points.

  1. Choose the right material. For crafts that are attached to windows or walls, it is better to take thin sheets. You can use notebooks, tracing paper, and napkins. Office paper, craft paper, and whatman paper are suitable for hanging products. The materials are denser and hold their shape well. It’s just more difficult to cut them; you’ll need a strong, sharp tool.
  2. Spend more time on the product. The drawing doesn't have to be complicated. The main thing here is a lot of matching lines and notches. The more, the more complex the pattern seems, even if you cut a dozen identical strips, like a “Herringbone”.
  3. Find thin blade scissors. The elegant tip of the tool will allow you to remove small dots and stripes - the craft will only benefit. Some people consider nail scissors ideal, but they won’t take thick Whatman paper. Look for tools to suit your needs.

Volumetric paper snowflakes

Volumetric crafts are less refined than their carved counterparts, but they look more attractive as space decoration. Don’t understand how to cut snowflakes out of paper with your own hands step by step? Try the options below.

"Fan"

The creation of “Fan” can be entrusted to a child or a person far from creative.

  1. Take several sheets. The more there are, the denser the craft will be.
  2. Place one vertically in front of you.
  3. Draw the sheet with horizontal, equally spaced stripes - optimally every 1-3 cm.
  4. Change the length of the indentation - the final appearance of the product will be different from the previous ones.
  5. Next, fold the base like an accordion: bend the first strip to the left, the second to the right, the third to the left again - and to the end.
  6. Squeeze the accordion and fold it in half vertically. Glue the touching sides together.
  7. Create several parts and connect them together. You will get unusually beautiful snowflakes made of paper - something like a pleated skirt.

"Flower"


The voluminous craft is ready, all that remains is to hang it up. The manipulations in the process of creating “Flower” are simple and clear, the result is incredibly beautiful.

You are not going to fill the interior winter's tale? Simple creativity is still worth mastering. For me, creating “crystals” is a great way to relax and get distracted. Successful snowflakes make your imagination work harder, come up with more and more intricate patterns, and make your tools more skillfully bend around thin lines. Try to get your family involved in something, you will be in a New Year's mood and feel comfortable.

See you soon, share your successes and subscribe to blog updates in anticipation of new creative ideas.

The days of children cutting out jagged snowflakes from their notebooks to decorate their classroom windows are slowly becoming a thing of the past. And, if earlier kids were proud of their original works and could say to each other: “This is my snowflake on the window,” today ready-made stencils for snowflakes play this role.

Read also:

On the one hand, they limit children's imagination, preventing the manifestation of individuality and creativity. There was a time when the windows of every school were hung with thousands of uneven snowflakes, made by timid children's hands, but with soul and imagination.

But today, cutting out snowflakes from paper with special designs allows you to create amazing works. And, when cutting stencils become commonplace in a craft lesson, children, creating their own snowflakes on your windows, create their little “works of art” much more neatly and beautifully than those who did not study.

To begin with, to make beautiful snowflakes on New Year you will need:

- blank sheets of A4 paper;

- diagrams of snowflakes that can be downloaded on the Internet or simply bought at a craft supply store.

Here's where to start cutting beautiful decorations for the window, reminiscent of lace and real small works of art.

What is better to choose for of different ages children

Snowflake templates for cutting out of paper can be simple or complex. The first ones are usually designed for children in the 1st grade or preschool group. Such window decorations are very simple, do not have an overly complex design, and labor teachers advise starting with them. Stencils beautiful snowflakes made from paper can be found on the Internet and printed on a printer. As a rule, they have a special mark “for beginners” or the age of the child is indicated. For the first time, we cut them out of thick paper together with the child. Of course, the first time it may not work out at all. Therefore, you need to download several copies to make a beautiful snowflake with your own hands again. For the first time, it is better to choose large decorations for the window by looking at the templates for cutting out snowflakes from paper. As a rule, they are simpler and less delicate than others. Well, when you get them, you can choose much more complex paper snowflake stencils. Usually they are very complex, have complex patterns and then resemble beautiful lace.

So, for a preschool group or first grade, it is better to choose snowflake patterns with a large and simple design, since hand coordination is not yet sufficiently developed in children of this age. If the baby does something very difficult, he may not only not enjoy the result, but also cut himself. Therefore, you need to start with simple templates, which you can download on the Internet. You can watch on request for a certain age (for example, up to 5 years), so that the process of cutting out snowflakes will bring pleasure to the child and will not lead to disappointment.

As soon as he learns to do beautifully ordinary New Year's snowflakes, you can proceed to a more complex stage, for example, cutting out piercings. Already in the second and third grades, a child’s hand motor skills become more accurate, thanks to learning to write. And, although in the first grade many children easily cope with templates for cutting out decorations from windows, for the older age group, most have difficulty doing this. Therefore, it is necessary that the baby does not cut himself by observing the following rules:

- do not buy too thick paper to make paper snowflakes with your own hands, as it will be difficult for the baby to cut them out;

- do not bend it too many times when cutting, so that it is convenient to cut and use sharp scissors, since injuries most often occur when the paper for window stencils is poorly cut and the child makes a lot of effort.

So, when you have mastered simple New Year's snowflakes from napkins, as in the photo, you can make more complex ones. Many people use not only a ready-made paper set with detailed description or photos on the Internet, but also videos. The sample can be downloaded for free on the Internet and viewed with children. And you can also make your own, looking at the photo. New Year's gift class called Christmas tree made of snowflakes. It can become a decoration for every desk.

How to make a Christmas tree from snowflakes

To make it you will need:

- white foam;

— several sticks (preferably toothpicks);

- paper napkins, preferably thick ones.

First you need to print the template. It’s good if there are snowflakes on the tree (templates for cutting out of paper that we have) of the same shape, but different sizes. You can also buy them in a creativity kit. It is advisable to choose thick paper from which decorations will be easy to cut out.

Then, using the openwork template, cut out several crafts from paper. They may be slightly different from each other. And after that, you need to stick a toothpick into the middle of the round foam. Then cut out the clamps from the rolled paper and attach them with tape. Only in this sequence - first the fixative, then the snowflake, then repeating the sequence. The top of such a Christmas tree can be decorated at your discretion. However, in order for the snowflakes to stick, it is not advisable to use napkins that are too soft. Then they will look beautiful, and children and even adults will like the tree.

For the New Year, you can create gifts with your own hands in a pleasant way and we suggest knitting a New Year tree, giving it to a friend or decorating a live tree.

“Beauty Snowflake” Master class with step-by-step photos.

Cutting snowflakes from paper.

Sidorova Zoya Grigorievna, teacher at MBDOU " Kindergarten combined type No. 8 "Stork" Michurinsk
Description: This master class is intended for children from 6 years old, educators, teachers additional education, loving parents and creative people.
Purpose: for decorating a room for the New Year, Christmas holidays, a gift, a Christmas tree decoration, can serve as work for a New Year, Christmas exhibition, competition.
Target: making paper snowflakes.
Tasks:
Learn to cut snowflakes from paper.
Introduce the technique of cutting out 6 and 8 ray snowflakes.
Develop the ability to work with scissors, creativity, imagination, fantasy, aesthetic taste.
To cultivate hard work, patience, accuracy, the desire to complete the work started, the desire to do something nice for family and friends.

Dear colleagues, today I want to present a master class on cutting paper snowflakes. Everyone has cut out snowflakes from paper at some point. Have you noticed that a miracle is happening? You fold a simple sheet of paper, cut it out, cut it out... And you don’t even mean that you are performing magic with your own hands, which happens on New Year’s Eve! What happens there is not clear. Then you carefully unfold it and... This is no longer a simple piece of paper, this is beauty! The symmetry of a snowflake fascinates, attracts the eye, you want to look at it and admire it.
This master class is designed for children aged 6 years and older. The work will be of interest to everyone who loves to create and bring joy to friends and family during the Christmas holidays.

Some interesting information:
Once upon a time, people believed that snow or rain were water droplets. In the warm season, rain pours out of the clouds, and in winter they fly out like snowflakes. But scientists have proven that snowflakes are not formed from water droplets, but are produced from steam.
This vapor is constantly present in the air. He rises high into the sky, where it is very cold. There, water vapor turns into tiny pieces of ice. The ice floes move, collide and cling to each other. So they grow, becoming bigger and bigger. And they begin to fall to the ground like beautiful snow stars.


Ah, beautiful and sweet!
How could it become like this?
All made of rays - needles.
But the needles are not from Christmas trees!
And so delicate!
I'll catch her now!
(Snowflake)
Today I bring to your attention a master class on making paper snowflakes
Materials required for work:
1. A4 sheet of paper
2. Scissors.
3. Simple pencil


Rules for handling scissors:
1. Check the tool before work. Use well-adjusted and sharpened scissors.
2. Do not hold scissors with the ends up, do not carry them in your pocket.
3. Do not use scissors with loose hinges.
4. Do not cut with scissors on the go, do not approach your friends while working, do not leave the scissors with the blades open.
5. Pass the scissors only closed, with the rings towards a friend.
6. Place the scissors on the table so that they do not hang over the edge of the table.
7. Monitor the movement and position of the blades during operation.
8. Use scissors only for their intended purpose.

Step by step process performing the work:
You can use office paper, colored paper for children's creativity, or origami paper for cutting out snowflakes.
1 Method. Cutting out an 8-ray snowflake.
This snowflake base is easier to create for children of preschool and primary school age.
We fold the blank for the snowflake from a square sheet of paper, so we cut off the excess part


Fold the resulting triangle in half perpendicular to the base


Fold in half again, connecting the sharp corners of the triangle


Fold again, aligning the sides.


Cut off the excess part. The resulting triangle is the basis for the snowflake.


A simple pattern can be cut out immediately without preparation:



It turned out to be such a snowflake


Method 2. Cutting out a 6-ray snowflake.
You need to fold the paper to form a regular hexagon
We start folding with a square


Place the triangle base down


We divide the unfolded angle of the base of the triangle into three equal angles


We wrap one sharp corner according to the photo


We put a second acute angle on it


Trim evenly to form a triangle


Fold the triangle in half


Using a simple pencil, draw a drawing on the base.


Cut out the painted part


We carefully unfold it. It turned out to be a snowflake.


You can make the pattern more interesting by cutting out small triangles, stripes, etc.


The same snowflake will be more carved and beautiful


We will cut out the next snowflake without a pencil sketch. The thinner the pattern on the base, the more beautiful the snowflake will turn out


Use your imagination, cut as you like


Cut until there is very little paper left on the base.


Carefully unfold


And here she is - our beauty


Using these snowflakes, we decorate the group for the New Year holidays


What if you put the most beautiful snowflake in a frame? It turned out like this:

Everyone is happy for the new year, especially children. New Year holidays they wait impatiently, and you can brighten up the wait by keeping your hands busy with something interesting and useful, for example, making decorations for windows or curtains in the form of beautiful snowflakes. But children’s little hands are not always able to cope with the intricate patterns on snowflake templates; such fingers need something simpler, and we have that something. These are patterns of simple snowflakes, suitable for preschoolers, or first-graders. The most important thing is to intelligently bend the workpiece, understanding where the middle of the snowflake will be, and then all that remains is to trim the edge as necessary.

To begin with, it is better for the child to practice plain paper, it is more pliable. And when you learn how, you can start making light and translucent snowflakes from paper napkins. It’s not worth practicing on napkins, it’s more difficult to bend the workpiece evenly, the edges move relative to each other and the child will not be satisfied with the craft, practice is important here.

Classic snowflake:

If you also cut off the sharp corner, you will get a hole in the center of the snowflake.

Ice snowflake:

It also looks like it’s made from ice crystals, but with a hole in the center:

These are such simple and easy to make snowflakes. If it doesn't work, try again, and you will definitely succeed :)