Did you want to become a gangster who terrifies others? Or are you striving to understand the secrets of the life of noble samurai who faithfully serve their leaders? If any of the above applies to you, then you simply must know how to make a weapon out of paper. We will help, our pistols and swords will not leave anyone indifferent.

We suggest that you and your child design a weapon that is completely safe. The most important thing is that you can glue together as many weapons as can fit in the “weapons” room. The quantity is limited only by the availability of A4 sheets, tape and glue.

All crafts are related to the origami technique. Don’t worry, building everything is not as difficult as it seems right away, you don’t need to master the entire technique, just study the clear instructions, read the examples and perform all the steps correctly. Our descriptions will help even the youngest readers understand how to make weapons out of paper.

Is your boy a mysterious ninja who can steal a pie from the table without being noticed? He definitely needs to be armed, and this will help

This pistol model is simple, even for a child. It is based on several parts.

We present you step-by-step instructions on how to make a gun out of paper:

  • take a thick sheet (if it is rectangular, cut out a square);
  • bend it in the middle and divide it (you can use your hands, but for accuracy, use scissors) into two halves;
  • fold one of the parts in half twice;
  • we bend the resulting fragment and put it aside for now, while we ourselves begin to work on the second part of the square;
  • bend the longest edge and carefully iron the line (use a ruler), make sure that the edges on the sides completely coincide;
  • repeat the same action again;
  • fold the resulting workpiece in half;
  • turn one of the sides at an angle (which doesn’t matter);
  • We do the same with the other side;
  • Now you need to connect the first and second workpieces, for this the ends of one part
  • push it into the “loops” that were created in the second workpiece;
  • Pull the handle into the barrel and tighten.
    That's all, you have learned how to make a gun out of paper. Agree, it's not difficult at all.

Revolver

Want to learn how to make sophisticated weapons out of paper? The previous version looked similar in appearance to a pistol, which is popularly called a “pugach”, now let’s start making a revolver!

Prepare:


Let's start “arming ourselves”:

  • fold the sheet in half;
  • cut the sheet along the resulting fold;
  • take one of the halves and fold it in half;
  • now you need to fold each edge towards the middle, you should have smooth edges along which you can fold the desired element;
  • we determine the middle on the workpiece and turn the edges to it;
  • each edge needs to be tucked to the folded line, all that remains is to wrap the resulting figure;
  • bend one edge along the second mark, perform the same action with the second edge;
  • let's take care of the remaining part of the square, divide it into two parts;
  • we fold one of the parts across;
  • we received a blank for the trigger;
  • glue one and the other side;
  • using the handle, we begin to twist the barrel, fasten the edge with tape so that the workpiece does not unfold;
  • we return to the large workpiece, wrap it with the piece that remains, the edges need to be glued so that the sheet does not slip off;
  • We insert the barrel into the edge of the winding, carefully bend the end, by the way, it is also better to glue the barrel;
  • We attach the trigger with glue and strengthen the edges of the handle.

If you did everything correctly, then you should have an excellent pistol, and now you know how to make a durable weapon out of paper.

Despite self-sufficiency, if you are not sure of the accuracy of your measurements, during the manufacturing process do not rely on your eye, use a ruler.

Some diagrams remain incomprehensible to people; they tell the main steps that describe how to make a firearm out of paper. It’s easier to focus on the schematic images that we will provide below. Our site scheme offers you step by step manufacturing from simple crafts to more complex ones.

Double-barreled pistol

Now let's look at another option interesting toy. Now we will figure out how to make a double-barreled pistol out of paper.

  • prepare several thick sheets;
  • fold one of them in half and lengthwise;
  • then fold it and once again, carefully iron the place where the fold is made so that it is clearly drawn;
  • Unfold the workpiece and bend it to the middle of the edge, making sure that the same distance remains from the fold line to the middle.

We have made a handle, below are further instructions on how to make our pistol out of paper.

Let's get to the barrel:

  • take the second sheet and roll it into a tube;
  • the resulting tube must be threaded into the handle, which was previously folded in half.

For crafts, you can use regular paper; it’s easier to fold, but we recommend that before you make such a gun out of paper, think about whether you want the toy to last longer? If so, use cardboard.

Samurai knife

Paper is the main material during origami making. You can make many crafts from it. Most kids have favorite superheroes, and they want weapons like their favorites. The main weapon of superheroes is a knife; it is not necessary to buy it, because it is quite easy to make with your own hands.

We will tell you later how to make a weapon of this type from paper. But first prepare several landscape sheets. Having theoretical knowledge of how to make a knife out of paper, let's get to work.

Making a knife:

  • fold the prepared sheets;
  • it turns out to be a triangle, it also needs to be folded in half;
  • unfold the craft to its normal state and turn the corners to the center;
  • Next, we fold the workpiece in half and wrap the protruding ends into the resulting pocket;
  • thus, it turned out to be a knife blade.

Now we’ll tell you how to make a knife handle out of paper and connect it.

It is made like this:


So after making it, you not only know the theory of how to make a knife out of paper, but also tried to design it. If you need to make the product heavier, it is advisable to insert a coin or pebble into the middle of the blade.

To get a durable and reliable craft, the site advises using cardboard; folding it, of course, is difficult. But to get clear lines, you can smooth the workpiece not with your fingers, but with a credit card or a ruler. Your little samurai will thank you!

In a separate article, we looked at how you can make a bow and arrow toy with your own hands.

Simple sword

While studying the material on how to make a weapon out of paper, your gaze fell on the sword you had made. We have described in detail how to make a knife out of paper, now we will make a sword.

Of course, you can buy plastic or wooden swords, which have a more impressive appearance, but it is much more interesting to fold it from an ordinary sheet, together with your child.

For production you will need:

  • two sheets of A4;
  • scissors;
  • you can use foil and colored cardboard;
  • glue.

During the manufacturing process, you can use foil. The blade of the sword will be bright and attractive, like that of a real knight. The handle can be made from ordinary colored cardboard. But first, let’s just practice and make a craft using the usual materials.

Manufacturing procedure:


  • cut out 2 rectangles measuring 11x23 cm;
  • fold it in half and unfold it to its original position;
  • now we bend the upper and lower sections of the center line and bend them in half;
  • at this stage we get a sword blade;
  • for the strength of the blade, it is advisable to insert a piece of cardboard or plastic into the middle;
  • At the end of making the blade, we glue everything with glue, so the product will not fall apart.

We figured out how to make a sword blade out of paper. Now let's start making the weapon handle. The process goes like this:

  • We take colored material as a basis;
  • bend the sheet in half;
  • fold the edges to the central fold and place fold marks;
  • We bend the lower edges to the top mark, and the top to the bottom;
  • the result is two thin folds;
  • from the narrow part the corner must be folded to the first fold;
  • fold the bottom and top edges to the first fold;
  • bend the sheet to the already formed fold and fold the short side to the right side;
  • turn the workpiece over and fold it again to the right side;
  • the other side is folded in the same way;
  • We place one of the parts of the resulting product in the pocket of the blade, turn the craft over and take out the triangle;
  • fix the handle and blade with glue.

This is how a gladiator sword is made. We will tell you how below.

Advanced Sword

Designing a sword is not as difficult as it seems. Paper products are great for children's games. We will now tell you how to make a sword out of paper.

For work we will use a regular landscape sheet and scissors. We have divided our step-by-step instructions into several stages. Let's move on to the first stage:


We've almost reached the end and learned how to make a luxurious sword out of paper. There is very little left.

Our sword is ready for battle. Please note that the last instruction is quite complex, it may take longer than planned, but this awesome weapon for battle is worth it.

Do-it-yourself toys are doubly pleasant to use in games. Children treat the results of their labors with care and are proud of the work done. It turns out that you can also make a weapon out of paper using the origami technique, and it will look like a real one. Both a novice craftsman and a child can easily cope with assembling a wide variety of equipment for war games, because most models do not require layouts and templates, but rather plain paper and visual instructions.

In this article we will tell you how to assemble paper origami for beginners - ninja weapons and firearms models that do not require special skills.

Using the origami technique, ninja weapons are made from paper in different ways, depending on its type and size. As a result, it turns out to be quite strong, light and safe, so that the crafts can be used in a toy fight without fear of one of the children getting hurt. The materials you will need are white and colored paper sheets.

Most quick option, which even a beginner can make, is a four-pointed throwing star.

Prepare one square sheet and scissors, make two modules according to the diagram, then connect them together. There is no need to glue anything.

Using the same principle, you can assemble a more voluminous eight-pointed star:

  • Fold eight identical modules as shown in the diagram.
  • Combine them with each other, placing each subsequent module in the pocket of the previous one.
  • Then tuck the end of the first module into the pocket of the last one - the star is ready!

And here is how a large transforming throwing shuriken is made. With such a bladed weapon, not only the child, but also the father will be enthusiastic about ninjas. Shurikens look best in contrasting colors: blue, black or red and white.

Follow the instructions carefully:

  • Make eight identical rectangular rhombuses from square blanks.
  • Connect them one by one.
  • Transform the throwing star by carefully moving it to the center and back.

See how to make an origami weapon out of paper, a sword reminiscent of Leo the Ninja Turtle's trident: assembled from just one sheet. The process is quite complex and labor-intensive, requiring care and diligence.

It’s easier to make an elegant katana with a sheath; even a preschooler can cope with this task if he assembles the craft together with his dad, carefully following the sequence of movements outlined in the diagram.

Japanese combat knife - kunai. At the base it has two identical square elements that fold together to form a point. The handle is rolled up from a separate sheet twisted into a tube. A strong connection is ensured with tape, but you can use transparent or thick white tape. At the last stage, a ring is attached to the handle. The kunai can be coated with silver or golden varnish or foil - this will make the craft more durable and beautiful, especially if you depict the shadow of the notch in the center of the blade.

You can diversify samurai wars with nunchucks - for fans of Mikey the Turtle:

  • Roll two cylinders from A4 sheets with a diameter of approximately 5-7 cm.
  • Secure the edges with adhesive tape along the entire length.
  • Make the same cylinders from old newspapers and magazines, carefully push them inside the “pipes”.
  • Take a thick thick rope, wrap it around both cylinders, and use special silicone glue to fix it. Secure the ends with additional tape.
  • Connect the finished nunchuck parts with twine. First, run the rope along each workpiece and stretch it inside the cylinders, then tie it.

Firearms ammunition

Firearms can also be made using the origami technique. Adult craftsmen collect real masterpieces.

The most basic pistol can be made in literally five minutes:

  • Fold the two edges of the square sheet over.
  • Fold the resulting rectangle in half.
  • Bend one of the edges diagonally.
  • Bend the top edges down.

Another assembly method - from two blanks - allows you to make an elegant pistol with a loop in the middle.

Is it possible to assemble a weapon using the origami technique from paper that shoots toy bullets? Yes, and there are several options. Additional materials needed adhesive tape, cardboard (for greater strength), an awl and regular rubber bands. The bullets are the same thin rubber bands or cylinder tubes twisted from leaves - shooting with such devices is safe, convenient and fun.

A hunting rifle is assembled in much the same way, only the barrel will be long and the handle will be more hollow.

Another common type of weapon is a revolver. Simple scheme its production is presented below. You can experiment and try to make complex models using multi-colored cardboard and some additional materials. This entertainment is more for adults, but the craft itself will be an excellent gift for a little boy.

Making ammunition for toy wars is a fascinating activity for boys of all ages and their serious adult dads. This is an exciting way to spend an evening or weekend together. Together with your son, choose what you want to make, prepare required material, follow the photo and video instructions, invite the neighbors' kids and organize real wars.

I don’t want to deny the popularity of origami at all. Almost everyone can learn how to make paper crafts. And, probably, there is no person who has not folded a paper boat or airplane at least once. All these simple models can be considered the first steps in mastering the art of origami.

Those who are interested in such things have most likely asked themselves the question more than once: “How to make weapons and more complex fakes out of paper?” After all, such a souvenir can be made right in front of the child, and then together we can engage in the most interesting transformation of a completely flat sheet of paper into three-dimensional shapes.

The simplest pistol

It is believed that various fakes, or rather their production, are great for spending time with children. The child will develop motor skills and imagination. It also promotes attentiveness and perseverance.

For a boy, it is quite possible to do simple origami for the first time. A paper weapon, such as a pistol, is made of two parts.

To do this, you need to bend the rectangular sheet in half. Its right and left sides bend inward. The procedure for folding the sides is repeated two more times. Then the same actions are performed with a square-shaped sheet.

After this, the weapon handle is made from the first element. The form is folded in half, unfolded and divided into three parts. The right piece bends down 90°, and the same thing happens with the left piece. The components of the parts are put together and the result is a handle.

The trunk itself is a former square sheet of paper. It is connected to the handle, and the paper origami “Weapon” is ready.

A sophisticated paper gun that can shoot

Origami "Pistol" is great entertainment and relaxation at the same time. The activity itself is available to anyone, anywhere and is super economical. You can use it to keep yourself or your child busy, for example, while waiting in line to see a doctor.

For this you will need paper and nail scissors. As for the paper itself, it is better to use cardboard. It is more durable and will not deform so quickly. But, in principle, any paper is suitable for origami.

And yet, how to make a weapon out of paper? This problem can be solved by reading the step-by-step instructions.

The process of making origami "Weapons"

First, the A4 sheet is folded lengthwise several times. This is the barrel of the future product. Then the pistol grip is made in the same way. It should be a little wider.

Both pieces are smoothed out and the smaller piece is superimposed on the larger one. The lower workpiece is divided in half visually. Alternately, the right and left sides are bent towards the center of the product. After this, the part is folded towards the center again.

Use scissors to make a small hole at the base of the pieces. The new sheet of paper is turned towards itself with the short side and folded to its middle. The resulting part is the trigger. The part of the sheet that is not used is cut off. The element itself is folded in half and pushed into the gap, which is made at the handle.

The halves of the thin workpiece are threaded into the pockets that are formed at the wide part. The edges are folded carefully to ensure even corners. If necessary, excess is trimmed off the trigger.

Then another sheet of paper is taken. Its width is the width of the handle. The last edge of the paper weapon model is folded inward. It can be glued with tape to obtain a smoother and more beautiful pistol handle.

Finally, the last sheet is taken and the same actions are performed with it as with the trigger. The first edge of the manufactured part is bent to the left so that the corner remains outside. This corner is cut off. The blank is threaded into the back of the barrel - and the gun is ready.

In order for the weapon to be fired, a rubber band for money is put on the barrel and bullets are made from paper.

Weapons of real ninjas

The art of origami makes it possible to make not only flowers, boats and airplanes from paper. It can be made from various types weapons, such as the "ninja star".

Shuriken is a type of throwing weapon. It was used by legendary ninjas. By the way, they were quite seriously interested in mysticism and therefore applied various mysterious signs and hieroglyphs to their weapons. All this helped them in battles. On this paper weapons You can also depict ancient hieroglyphs. Then the child will certainly not remain indifferent.

Scheme and assembly process

To work, you only need one sheet to make a paper weapon. Its diagram is needed for better and more understandable assembly.

The paper is folded in half. Along the line where it is folded, it is cut into two strips. Each piece is bent lengthwise. Then, following the origami pattern, corners are made on the elements.

The result is two mirror components. The left one is turned over to the other side and overlapped with the right one. The triangular shapes of the bottom piece are then tucked under the center edges of the top pieces.

The figure turns over. The same actions are performed with the remaining seven corners. After these steps, the question of how to make a weapon out of paper can be considered closed. After all, shuriken is also a weapon with a very interesting and long history.

Samurai knife

In addition to shooting weapons, you can make a samurai knife. Kunai is a tool originally from Japan. In its shape it is somewhat similar to a fish. Quite widely used on the farm. But if the need arose, it was used as a formidable throwing weapon.

The creation of this craft comes from plain paper, and if everything is done carefully and accurately, then the question of how to make weapons from paper will definitely not arise.

The process of creating an original knife

First, two elements are made of paper. Excess ends can be removed with scissors. Stationery supplies allow you to make a more accurate cut on a product such as a paper weapon. The diagram will help you avoid getting confused during the assembly process.

The square sheet is folded diagonally. The resulting triangle is folded in half. The figure turns to its original position. After this, each of the corners is wrapped so that the edge can coincide with the fold line at the center.

The part is folded in half along the central fold strip. The ends of the paper are tucked into a pocket on one side of the folded element. This is the edge of a knife.

After the part is completed, the handle is made. To do this, fold a sheet of paper diagonally, then make a flattened tube out of it. It is then connected to the “blade” itself. The corners are folded towards the center and secured with tape for a stronger connection.

Finally, the final touch is made: a round ring on the knife handle. It is attached, and the origami toy can be used.

Children can also be involved in the work, so that later, if they want to make such a product, they will not have the question of how to make a weapon out of paper. And if desired, the child can always do crafts on his own or with friends.

Origami as a small achievement in art

Each, even the simplest model, is a small achievement in mastering the art of paper origami. Schemes (weapons, for example) are used to more clearly implement various models.

To engage in this type of creativity, it is not at all necessary to spend a lot of money, because all you need is paper. At the very beginning, it may seem unrealistic and very difficult. But in fact, the activity is very exciting, and if you use certain patterns and rules, origami will perhaps turn into favorite hobby for the whole family.

The Japanese ninja weapon “shuriken” is made using the classic origami technique, that is, the basis for creating the figure is a paper square. And when making crafts, no scissors or glue are used. If you follow step by step instructions Surely, even beginners will be able to please themselves and their loved ones with the original shuriken origami.

The article describes in detail how to make paper edged weapons yourself using a diagram, video and photo master classes.


The child will be interested in assembling simple origami weapons and feeling like a Japanese warrior. The shooter can throw shuriken as many times as he likes, but nothing will happen to this flying star if it is done step by step, according to the instructions described in the article.

Shooting shurikens while playing ninja is safe because they are made of paper. And not a single toy gun will cause as much children’s delight as having fun with self-made shuriken. As a result, the child receives a double benefit: he develops through the creation of origami and gains the opportunity to play fun.

Step by step instructions:

  1. Taking a square of paper, bend it in half, unfold it and, using a ruler, divide it into equal parts, as in Fig. 2, paragraph 1.
  2. Connect the vertical sides of each part to each other, carefully press them in the center with a ruler (Fig. 2, point 2).
  3. Fold the resulting 2 identical pieces as in Fig. 2, item 3: mirror (relative to the vertical center), bend it twice in opposite directions - the short edge of the part to the longer one.
  4. You get 2 blanks (Fig. 2, item 4).
  5. Then they are placed one on top of the other and connected so that the corners of one part are placed in the pockets of the second.

Rice. 2:

Video: Origami shuriken

Transformable throwing disc

The ability to combine templates allows you to make double and eight-pointed Japanese ninja stars. In the photo fig. Figures 1–2 show examples of complex compositions built from the required number of throwing and combat paper discs.

Rice. 1:

Rice. 2:

Step by step execution:

  1. Prepare two identical large squares, each of which divide into four smaller ones. This way you will receive blanks for eight identical modules.
  2. Fold each square and unfold it along two diagonals, as well as connecting the opposite sides. This way the center of each square will be clearly marked.
  3. Take 1 prepared square, connect two corners of one of the sides in the center, along one of the planes of the sheet.
  4. Align the corners of the remaining side by bending the center line inward. Get a diamond-shaped rectangle. This is done with the rest of the blanks - squares.
  5. Each of the eight rectangles is connected to the previous one, in stages, by bending small corners inside the next one. For clarity, watch the video with a detailed master class.
  6. As a result of alternately connecting the parts, a shuriken - transformer is obtained. For greater effect, do it in contrasting colors (photo in Fig. 3).

Rice. 3:
Another diagram:

Video master class on creating a transforming shuriken

Paper firearms

Let's look at the assembly diagrams for the main ones: a pistol, a revolver and a shotgun.






Use the templates and make a gun that shoots. For “cartridges” we recommend using paper balls.

Video: Origami firearms




Origami diagrams for assembling weapons












Sometimes each of us wants to return to childhood and remember our favorite toys. So, almost any man will be interested in succumbing to childhood memories and making a gun out of paper for his son or grandson.

Which method do you prefer? Origami comes to the rescue - the ancient Japanese art of folding paper figures, which you can involve all family members in.

It has been proven that joint origami classes with children can bring a lot of positive emotions and new impressions for all participants in this creative process.

Diagram of a simple origami paper gun

The easiest way to fold a pistol looks like this:

What will you need?

You will need two rectangular sheets of paper and a little patience.

Step by step instructions

  1. We fold both sheets into two strips like an accordion, only wrapping the paper in one direction (without turning the workpiece over). In this case, it is desirable that one strip is slightly narrower in width than the other (as in the summary diagram above).

  1. We fold each resulting paper strip in half.

  1. From a wider piece we make an improvised loop, which we put on a narrower strip, as shown in the summary diagram for making a pistol (step 3 and 4).

The toy gun is ready!

If you wish, you can make and glue a sight to it by taking a small strip of paper and folding it as shown in the picture:

You will learn how to make another version of this pistol out of paper (which can also shoot!) by watching the following video:

Paper gun and revolver using origami technique

Taking this as a basis basic diagram You can easily and simply make a paper gun without tape and glue:

And after getting a little confused and showing a bit of imagination, build a toy paper revolver with your own hands:

Simple shooting pistol

Another easy-to-use paper gun that shoots bullets can be done using the following instructions:

What will you need?

To work you will need:

  • sheet of paper
  • pencil and black pen,
  • scissors,
  • rubber band for money.

Manufacturing scheme

We perform the following steps step by step:

  1. We draw the outlines of the future weapon on paper. To do this, you need to bend an A4 sheet of paper in half and draw the contours of a gun on one part of the sheet ( steps a-b on the main diagram).

  1. Carefully cut out the pistol along the contour and lay out the sheet: you get a mirror image of the pistol.

  1. Now you need to draw the missing parts on it with a black pen so that the model looks like a real pistol.
  2. Making a bend for the bullets. We easily press the upper part of the pistol barrel inward (step c) to create a small groove into which homemade bullets can be inserted.

  1. We adapt the elastic band for shooting. At the beginning of the trunk we make a small cut (step d) and insert an elastic band into it. We tighten and secure it on the opposite part of the barrel so that when released it can capture the bullet.
  2. Let's make a bullet. We crumple a ball of paper (you can have several at once) and insert it into the groove we made.

The work is completed, the gun is ready!

You will find a master class on making another type of simple paper gun, this time in a mini format, which is also very, very easy to repeat, in the following video:

Volumetric model of a paper gun

Let's consider another realistic version of a 3D paper gun. Its production is somewhat more complicated than the previous ones and takes a little longer. However, we assure you, the result is worth it!

Materials

We will need:

  • sheets of A4 paper,
  • scissors,
  • tape or glue.

Operation scheme

  1. Gun frame.

Take a sheet of A4 paper and fold it in half several times. The result is a narrow strip that needs to be secured with tape so that it retains its appearance and does not unwind.

One edge of the strip must be bent towards the middle, the second one too. Both resulting edges should be the same in height. The result was a kind of groove with smooth, identical edges - the frame of the future pistol.

  1. Lever.

We repeat the same steps again, only we fold the sheet in half lengthwise and make a paper tube with a diameter of 4 cm. We fasten the paper handle with tape and make an oblique cut.

We connect the gun frame to the handle and secure it with glue or tape.

  1. Small details.

A strip of paper the same width as the frame must be carefully attached to the back of the handle with the frame. One side of the strip is secured with tape to the handle, the other to the frame.

This strip smoothly connected the two parts into one. Now, in order for the paper pistol to take on a look close to a real weapon, you need to cut out a piece of paper and glue this area, as shown in the figure.

We make a safety bracket from a strip of paper, secure one end of it with tape under the bottom of the frame, and the other on the front of the handle.

  1. Pistol barrel.

We tightly roll the paper into a tube with a diameter of 1 cm and a length equal to the length of the frame. Then we cut a rectangle in this tube - a hole for cartridges (focusing on the figure below).

We cut out a rectangular piece of paper and attach it to the barrel - it will cover the hole on the receiver cover.

Carefully secure the barrel to the frame using tape, leaving a small space between them so that the receiver mount can move freely.

  1. Gate.

We fold an A4 sheet of paper in five, seal the edges with tape and make a kind of roof for the frame itself, corresponding in size to the length of the trunk.

We place the paper shutter over the barrel and move it back, mark with a pencil the place where the hole is located near the barrel, and do the same in the shutter. This hole will serve to eject bullets.

To hold the bolt against the barrel, you need to attach a strip of thin paper to the bottom of the front edge of the bolt. Then we put the bolt on the barrel, move it back so that it merges tightly with the frame, and under it we fasten a strip of paper, approximately 3 cm from the rear edge.

These strips of paper will hold the shutter securely. The pistol is loaded when the bolt is pulled back and forth.

  1. Paper magazine for pistol.

We roll a piece of paper into a tube, make a rectangle out of it, approximate to the diameter of the handle, so that it fits there and does not fall out.

The weapon is ready for a toy battle!

You will learn how to make another interesting example of a shooting pistol at home by watching the following video:

To make a gun with only paper and stationery, no special skills required. All you need is desire and a little free time!